lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1346845026-24926-1-git-send-email-sourav.poddar@ti.com>
Date:	Wed, 5 Sep 2012 17:07:06 +0530
From:	Sourav Poddar <sourav.poddar@...com>
To:	<devicetree-discuss@...ts.ozlabs.org>,
	<linux-arm-kernel@...ts.infradead.org>,
	<linux-omap@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<linux-input@...r.kernel.org>, <sourav.poddar@...com>
CC:	<b-cousson@...com>, <balbi@...com>, <santosh.shilimkar@...com>
Subject: [PATCHv2 4/4] gpio: smscece: Add support for gpio IO expander feature

smsc can be used as an gpio io expander device also. So adding
support for configuring smsc pins as a gpio.

Cc: Benoit Cousson <b-cousson@...com>
Cc: Felipe Balbi <balbi@...com>
Cc: Santosh Shilimkar <santosh.shilimkar@...com>
Signed-off-by: Sourav Poddar <sourav.poddar@...com>
---
Changes since v1: 
 - Use edge triggering instead of level
 - Use devm_reuest_threaded_irq
 - In remove part, use "irq_free_desc" and
     "irq_remove_domain" api.
 drivers/gpio/Kconfig        |    7 +
 drivers/gpio/Makefile       |    1 +
 drivers/gpio/gpio-smscece.c |  380 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 388 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpio/gpio-smscece.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b16c8a7..e883929 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -444,6 +444,13 @@ config GPIO_ADP5588_IRQ
 	  Say yes here to enable the adp5588 to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
 
+config GPIO_SMSCECE
+	tristate "SMSCECE 1099 I2C GPIO expander"
+	depends on I2C
+	help
+	  This option enables support for 18 GPIOs found
+	  on SMSC ECE 1099 GPIO Expanders.
+
 comment "PCI GPIO expanders:"
 
 config GPIO_CS5535
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 153cace..7c803c5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_74X164)	+= gpio-74x164.o
 obj-$(CONFIG_GPIO_AB8500)	+= gpio-ab8500.o
 obj-$(CONFIG_GPIO_ADP5520)	+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_SMSCECE)      += gpio-smscece.o
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
diff --git a/drivers/gpio/gpio-smscece.c b/drivers/gpio/gpio-smscece.c
new file mode 100644
index 0000000..68a17fa
--- /dev/null
+++ b/drivers/gpio/gpio-smscece.c
@@ -0,0 +1,380 @@
+/*
+ * GPIO Chip driver for smsc
+ * SMSC I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2012 Texas Instruments Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/mfd/smsc.h>
+#include <linux/err.h>
+
+struct smsc_gpio {
+	struct device *dev;
+	struct smsc *smsc;
+	struct gpio_chip gpio_chip;
+	struct mutex lock;	/* protect cached dir, dat_out */
+	/* protect serialized access to the interrupt controller bus */
+	struct mutex irq_lock;
+	struct irq_domain       *irq_domain;
+	unsigned gpio_start;
+	int type;
+	int flags;
+	int irq;
+	int irq_base;
+	unsigned int gpio_base;
+	unsigned int dat_out[5];
+	unsigned int dir[5];
+	unsigned int irq_trig_fall[5];
+	unsigned int irq_trig_raise[5];
+	unsigned int int_en[5];
+	unsigned int irq_mask[5];
+	unsigned int irq_stat[5];
+};
+
+static int smsc_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct smsc_gpio *sg =
+		container_of(chip, struct smsc_gpio, gpio_chip);
+	unsigned int get;
+	return !!(smsc_read(sg->dev,
+		(SMSC_GPIO_DATA_IN_START + SMSC_BANK(off)) & SMSC_BIT(off),
+					&get));
+}
+
+static void smsc_gpio_set_value(struct gpio_chip *chip,
+			unsigned off, int val)
+{
+	unsigned bank, bit;
+	struct smsc_gpio *sg =
+		container_of(chip, struct smsc_gpio, gpio_chip);
+
+	bank = SMSC_BANK(off);
+	bit = SMSC_BIT(off);
+
+	mutex_lock(&sg->lock);
+	if (val)
+		sg->dat_out[bank] |= bit;
+	else
+		sg->dat_out[bank] &= ~bit;
+
+	smsc_write(sg->dev, SMSC_GPIO_DATA_OUT_START + bank,
+			   sg->dat_out[bank]);
+	mutex_unlock(&sg->lock);
+}
+
+static int smsc_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	unsigned int reg;
+	struct smsc_gpio *sg =
+	    container_of(chip, struct smsc_gpio, gpio_chip);
+	int reg_dir;
+
+	mutex_lock(&sg->lock);
+	reg_dir = SMSC_CFG_START + off;
+	smsc_read(sg->dev, reg_dir, &reg);
+	reg |= SMSC_GPIO_INPUT_LOW;
+	mutex_unlock(&sg->lock);
+
+	return smsc_write(sg->dev, reg_dir, reg);
+}
+
+static int smsc_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	unsigned int reg;
+	struct smsc_gpio *sg =
+	    container_of(chip, struct smsc_gpio, gpio_chip);
+	int reg_dir;
+
+	mutex_lock(&sg->lock);
+	reg_dir = SMSC_CFG_START + off;
+	smsc_read(sg->dev, reg_dir, &reg);
+	reg |= SMSC_GPIO_OUTPUT_PP;
+	mutex_unlock(&sg->lock);
+
+	return smsc_write(sg->dev, reg_dir, reg);
+}
+
+static int smsc_gpio_to_irq(struct gpio_chip *chip, unsigned off)
+{
+	struct smsc_gpio *sg =
+		container_of(chip, struct smsc_gpio, gpio_chip);
+	return sg->irq_base + off;
+}
+
+static void smsc_irq_bus_lock(struct irq_data *d)
+{
+	struct smsc_gpio *sg = irq_data_get_irq_chip_data(d);
+
+	mutex_lock(&sg->irq_lock);
+}
+
+static void smsc_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct smsc_gpio *sg = irq_data_get_irq_chip_data(d);
+	int i;
+
+	for (i = 0; i < SMSC_BANK(SMSC_MAXGPIO); i++)
+		if (sg->int_en[i] ^ sg->irq_mask[i]) {
+			sg->int_en[i] = sg->irq_mask[i];
+			smsc_write(sg->dev, SMSC_GPIO_INT_MASK_START + i,
+					   sg->int_en[i]);
+		}
+
+	mutex_unlock(&sg->irq_lock);
+}
+
+static void smsc_irq_mask(struct irq_data *d)
+{
+	struct smsc_gpio *sg = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->irq - sg->irq_base;
+
+	sg->irq_mask[SMSC_BANK(gpio)] &= ~SMSC_BIT(gpio);
+}
+
+static void smsc_irq_unmask(struct irq_data *d)
+{
+	struct smsc_gpio *sg = irq_data_get_irq_chip_data(d);
+	unsigned gpio = d->irq - sg->irq_base;
+
+	sg->irq_mask[SMSC_BANK(gpio)] |= SMSC_BIT(gpio);
+}
+
+static int smsc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct smsc_gpio *sg = irq_data_get_irq_chip_data(d);
+	uint16_t gpio = d->irq - sg->irq_base;
+	unsigned bank, bit;
+
+	if ((type & IRQ_TYPE_EDGE_BOTH)) {
+		dev_err(sg->dev, "irq %d: unsupported type %d\n",
+			d->irq, type);
+		return -EINVAL;
+	}
+
+	bank = SMSC_BANK(gpio);
+	bit = SMSC_BIT(gpio);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		sg->irq_trig_fall[bank] |= bit;
+	else
+		sg->irq_trig_fall[bank] &= ~bit;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		sg->irq_trig_raise[bank] |= bit;
+	else
+		sg->irq_trig_raise[bank] &= ~bit;
+
+	smsc_gpio_direction_input(&sg->gpio_chip, gpio);
+	smsc_write(sg->dev, SMSC_CFG_START + gpio,
+			sg->irq_trig_fall[bank] | sg->irq_trig_raise[bank]);
+
+	return 0;
+}
+
+static struct irq_chip smsc_irq_chip = {
+	.name			= "smsc",
+	.irq_mask		= smsc_irq_mask,
+	.irq_unmask		= smsc_irq_unmask,
+	.irq_bus_lock		= smsc_irq_bus_lock,
+	.irq_bus_sync_unlock	= smsc_irq_bus_sync_unlock,
+	.irq_set_type		= smsc_irq_set_type,
+};
+
+static int smsc_gpio_read_intstat(struct smsc_gpio *sg,
+				unsigned int *buf, int i)
+{
+	int ret = smsc_read(sg->dev,
+			SMSC_GPIO_INT_STAT_START + i, buf);
+
+	if (ret < 0)
+		dev_err(sg->dev, "Read INT_STAT Error\n");
+
+	return ret;
+}
+
+static irqreturn_t smsc_irq_handler(int irq, void *devid)
+{
+	struct smsc_gpio *sg = devid;
+	unsigned int status, bank, pending;
+	int ret;
+	smsc_read(sg->dev, GRP_INT_STAT, &status);
+
+	if (!(status & SMSC_GPI_INT))
+		goto out;
+
+	for (bank = 0; bank <= SMSC_BANK(SMSC_MAXGPIO);
+		bank++) {
+		pending = sg->irq_stat[bank] & sg->irq_mask[bank];
+		ret = smsc_gpio_read_intstat(sg,
+				&sg->irq_stat[bank], bank);
+		if (ret < 0)
+			memset(&sg->irq_stat[bank], 0,
+				ARRAY_SIZE(sg->irq_stat));
+
+		while (pending) {
+			unsigned long   bit = __ffs(pending);
+			unsigned int    irq;
+
+			pending &= ~BIT(bit);
+			irq = bit + sg->irq_base;
+			handle_nested_irq(irq);
+		}
+	}
+
+out:
+	smsc_write(sg->dev, GRP_INT_STAT, status); /* Status is W1C */
+
+	return IRQ_HANDLED;
+}
+
+static int smsc_irq_setup(struct smsc_gpio *sg)
+{
+	unsigned gpio;
+	int ret;
+
+	mutex_init(&sg->irq_lock);
+
+	for (gpio = 0; gpio < sg->gpio_chip.ngpio; gpio++) {
+		int irq = gpio + sg->irq_base;
+		irq_set_chip_data(irq, sg);
+		irq_set_chip_and_handler(irq, &smsc_irq_chip,
+				handle_level_irq);
+		irq_set_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		irq_set_noprobe(irq);
+#endif
+	}
+
+	ret = devm_request_threaded_irq(sg->dev, sg->irq, NULL,
+			smsc_irq_handler, sg->flags,
+			"smsc_gpio", sg);
+	if (ret) {
+		dev_err(sg->dev, "failed to request irq %d\n",
+			sg->irq);
+	}
+
+	sg->gpio_chip.to_irq = smsc_gpio_to_irq;
+
+	return 0;
+}
+
+static int __devinit smsc_gpio_probe(struct platform_device *pdev)
+{
+	struct smsc_gpio *sg;
+	struct gpio_chip *gc;
+	struct smsc *smsc = dev_get_drvdata(pdev->dev.parent);
+	int ret, i, temp;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int irq_base;
+
+	sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL);
+	if (sg == NULL) {
+		dev_err(&pdev->dev, "failed to alloc memory\n");
+		return -ENOMEM;
+	}
+
+	sg->irq = platform_get_irq(pdev, 0);
+	if (np) {
+		of_property_read_u32(np, "gpio,base", &temp);
+		of_property_read_u32(np, "flags", &sg->flags);
+	}
+
+	gc = &sg->gpio_chip;
+	gc->direction_input = smsc_gpio_direction_input;
+	gc->direction_output = smsc_gpio_direction_output;
+	gc->get = smsc_gpio_get_value;
+	gc->set = smsc_gpio_set_value;
+	gc->can_sleep = 1;
+
+	gc->base = temp;
+	gc->ngpio = SMSC_MAXGPIO;
+	gc->owner = THIS_MODULE;
+
+	sg->smsc = smsc;
+	sg->dev = dev;
+	mutex_init(&sg->lock);
+
+	for (i = 0; i <= SMSC_BANK(SMSC_MAXGPIO); i++)
+		smsc_read(sg->dev, SMSC_GPIO_DATA_OUT_START + i,
+					&sg->dat_out[i]);
+
+	for (i = 0; i < SMSC_MAXGPIO; i++)
+		smsc_read(sg->dev, SMSC_CFG_START + i, &sg->dir[i]);
+
+	irq_base = irq_alloc_descs(-1, 0, sg->gpio_chip.ngpio, 0);
+	if (IS_ERR_VALUE(irq_base)) {
+		dev_err(sg->dev, "Fail to allocate IRQ descs\n");
+		return irq_base;
+	}
+	sg->irq_base = irq_base;
+
+	sg->irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
+		sg->gpio_chip.ngpio, sg->irq_base, 0,
+			&irq_domain_simple_ops, NULL);
+
+	ret = smsc_irq_setup(sg);
+	if (ret)
+		goto err;
+
+	ret = gpiochip_add(&sg->gpio_chip);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static int __devexit smsc_gpio_remove(struct platform_device *pdev)
+{
+	struct smsc_gpio *sg = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	ret = gpiochip_remove(&sg->gpio_chip);
+	if (ret) {
+		dev_err(&pdev->dev, "gpiochip_remove failed %d\n", ret);
+		return ret;
+	}
+
+	irq_domain_remove(sg->irq_domain);
+	irq_free_descs(sg->irq_base, sg->gpio_chip.ngpio);
+
+	return 0;
+}
+
+static const struct of_device_id smsc_gpio_dt_match[] = {
+	{ .compatible = "smsc,gpio" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, smsc_gpio_dt_match);
+
+static struct platform_driver smsc_gpio_driver = {
+	.driver = {
+		   .name = "smsc_gpio",
+		   .of_match_table = of_match_ptr(smsc_gpio_dt_match),
+		   },
+	.probe = smsc_gpio_probe,
+	.remove = __devexit_p(smsc_gpio_remove),
+};
+
+module_platform_driver(smsc_gpio_driver);
+
+MODULE_AUTHOR("Sourav Poddar <sourav.poddar@...com>");
+MODULE_DESCRIPTION("GPIO SMSC Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ