| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1346886537-11621-9-git-send-email-acme@infradead.org>
Date: Wed, 5 Sep 2012 20:08:48 -0300
From: Arnaldo Carvalho de Melo <acme@...radead.org>
To: Ingo Molnar <mingo@...nel.org>
Cc: linux-kernel@...r.kernel.org, David Ahern <dsahern@...il.com>,
Frederic Weisbecker <fweisbec@...il.com>,
Peter Zijlstra <peterz@...radead.org>,
Arnaldo Carvalho de Melo <acme@...hat.com>
Subject: [PATCH 08/17] perf record: Remove use of die/exit
From: David Ahern <dsahern@...il.com>
Allows perf to clean up properly on exit. If perf-record is exiting due
to failure, the on_exit should not run as the session has been deleted.
Signed-off-by: David Ahern <dsahern@...il.com>
Cc: Frederic Weisbecker <fweisbec@...il.com>
Cc: Ingo Molnar <mingo@...nel.org>
Cc: Peter Zijlstra <peterz@...radead.org>
Link: http://lkml.kernel.org/r/1346005487-62961-8-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@...hat.com>
---
tools/perf/builtin-record.c | 158 +++++++++++++++++++++++++++++-------------
1 files changed, 109 insertions(+), 49 deletions(-)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 479ff2a..7b8b891 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -71,19 +71,23 @@ static void advance_output(struct perf_record *rec, size_t size)
rec->bytes_written += size;
}
-static void write_output(struct perf_record *rec, void *buf, size_t size)
+static int write_output(struct perf_record *rec, void *buf, size_t size)
{
while (size) {
int ret = write(rec->output, buf, size);
- if (ret < 0)
- die("failed to write");
+ if (ret < 0) {
+ pr_err("failed to write\n");
+ return -1;
+ }
size -= ret;
buf += ret;
rec->bytes_written += ret;
}
+
+ return 0;
}
static int process_synthesized_event(struct perf_tool *tool,
@@ -92,11 +96,13 @@ static int process_synthesized_event(struct perf_tool *tool,
struct machine *machine __used)
{
struct perf_record *rec = container_of(tool, struct perf_record, tool);
- write_output(rec, event, event->header.size);
+ if (write_output(rec, event, event->header.size) < 0)
+ return -1;
+
return 0;
}
-static void perf_record__mmap_read(struct perf_record *rec,
+static int perf_record__mmap_read(struct perf_record *rec,
struct perf_mmap *md)
{
unsigned int head = perf_mmap__read_head(md);
@@ -104,9 +110,10 @@ static void perf_record__mmap_read(struct perf_record *rec,
unsigned char *data = md->base + rec->page_size;
unsigned long size;
void *buf;
+ int rc = 0;
if (old == head)
- return;
+ return 0;
rec->samples++;
@@ -117,17 +124,26 @@ static void perf_record__mmap_read(struct perf_record *rec,
size = md->mask + 1 - (old & md->mask);
old += size;
- write_output(rec, buf, size);
+ if (write_output(rec, buf, size) < 0) {
+ rc = -1;
+ goto out;
+ }
}
buf = &data[old & md->mask];
size = head - old;
old += size;
- write_output(rec, buf, size);
+ if (write_output(rec, buf, size) < 0) {
+ rc = -1;
+ goto out;
+ }
md->prev = old;
perf_mmap__write_tail(md, old);
+
+out:
+ return rc;
}
static volatile int done = 0;
@@ -183,12 +199,13 @@ static bool perf_evlist__equal(struct perf_evlist *evlist,
return true;
}
-static void perf_record__open(struct perf_record *rec)
+static int perf_record__open(struct perf_record *rec)
{
struct perf_evsel *pos;
struct perf_evlist *evlist = rec->evlist;
struct perf_session *session = rec->session;
struct perf_record_opts *opts = &rec->opts;
+ int rc = 0;
perf_evlist__config_attrs(evlist, opts);
@@ -222,10 +239,13 @@ try_again:
if (err == EPERM || err == EACCES) {
ui__error_paranoid();
- exit(EXIT_FAILURE);
+ rc = -err;
+ goto out;
} else if (err == ENODEV && opts->target.cpu_list) {
- die("No such device - did you specify"
- " an out-of-range profile CPU?\n");
+ pr_err("No such device - did you specify"
+ " an out-of-range profile CPU?\n");
+ rc = -err;
+ goto out;
} else if (err == EINVAL) {
if (!opts->exclude_guest_missing &&
(attr->exclude_guest || attr->exclude_host)) {
@@ -272,7 +292,8 @@ try_again:
if (err == ENOENT) {
ui__error("The %s event is not supported.\n",
perf_evsel__name(pos));
- exit(EXIT_FAILURE);
+ rc = -err;
+ goto out;
}
printf("\n");
@@ -280,34 +301,46 @@ try_again:
err, strerror(err));
#if defined(__i386__) || defined(__x86_64__)
- if (attr->type == PERF_TYPE_HARDWARE && err == EOPNOTSUPP)
- die("No hardware sampling interrupt available."
- " No APIC? If so then you can boot the kernel"
- " with the \"lapic\" boot parameter to"
- " force-enable it.\n");
+ if (attr->type == PERF_TYPE_HARDWARE &&
+ err == EOPNOTSUPP) {
+ pr_err("No hardware sampling interrupt available."
+ " No APIC? If so then you can boot the kernel"
+ " with the \"lapic\" boot parameter to"
+ " force-enable it.\n");
+ rc = -err;
+ goto out;
+ }
#endif
- die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
+ pr_err("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
+ rc = -err;
+ goto out;
}
}
if (perf_evlist__set_filters(evlist)) {
error("failed to set filter with %d (%s)\n", errno,
strerror(errno));
- exit(-1);
+ rc = -1;
+ goto out;
}
if (perf_evlist__mmap(evlist, opts->mmap_pages, false) < 0) {
- if (errno == EPERM)
- die("Permission error mapping pages.\n"
- "Consider increasing "
- "/proc/sys/kernel/perf_event_mlock_kb,\n"
- "or try again with a smaller value of -m/--mmap_pages.\n"
- "(current value: %d)\n", opts->mmap_pages);
- else if (!is_power_of_2(opts->mmap_pages))
- die("--mmap_pages/-m value must be a power of two.");
-
- die("failed to mmap with %d (%s)\n", errno, strerror(errno));
+ if (errno == EPERM) {
+ pr_err("Permission error mapping pages.\n"
+ "Consider increasing "
+ "/proc/sys/kernel/perf_event_mlock_kb,\n"
+ "or try again with a smaller value of -m/--mmap_pages.\n"
+ "(current value: %d)\n", opts->mmap_pages);
+ rc = -errno;
+ } else if (!is_power_of_2(opts->mmap_pages)) {
+ pr_err("--mmap_pages/-m value must be a power of two.");
+ rc = -EINVAL;
+ } else {
+ pr_err("failed to mmap with %d (%s)\n", errno, strerror(errno));
+ rc = -errno;
+ }
+ goto out;
}
if (rec->file_new)
@@ -315,11 +348,14 @@ try_again:
else {
if (!perf_evlist__equal(session->evlist, evlist)) {
fprintf(stderr, "incompatible append\n");
- exit(-1);
+ rc = -1;
+ goto out;
}
}
perf_session__set_id_hdr_size(session);
+out:
+ return rc;
}
static int process_buildids(struct perf_record *rec)
@@ -335,10 +371,13 @@ static int process_buildids(struct perf_record *rec)
size, &build_id__mark_dso_hit_ops);
}
-static void perf_record__exit(int status __used, void *arg)
+static void perf_record__exit(int status, void *arg)
{
struct perf_record *rec = arg;
+ if (status != 0)
+ return;
+
if (!rec->opts.pipe_output) {
rec->session->header.data_size += rec->bytes_written;
@@ -393,17 +432,26 @@ static struct perf_event_header finished_round_event = {
.type = PERF_RECORD_FINISHED_ROUND,
};
-static void perf_record__mmap_read_all(struct perf_record *rec)
+static int perf_record__mmap_read_all(struct perf_record *rec)
{
int i;
+ int rc = 0;
for (i = 0; i < rec->evlist->nr_mmaps; i++) {
- if (rec->evlist->mmap[i].base)
- perf_record__mmap_read(rec, &rec->evlist->mmap[i]);
+ if (rec->evlist->mmap[i].base) {
+ if (perf_record__mmap_read(rec, &rec->evlist->mmap[i]) != 0) {
+ rc = -1;
+ goto out;
+ }
+ }
}
if (perf_header__has_feat(&rec->session->header, HEADER_TRACING_DATA))
- write_output(rec, &finished_round_event, sizeof(finished_round_event));
+ rc = write_output(rec, &finished_round_event,
+ sizeof(finished_round_event));
+
+out:
+ return rc;
}
static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
@@ -463,7 +511,7 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
output = open(output_name, flags, S_IRUSR | S_IWUSR);
if (output < 0) {
perror("failed to create output file");
- exit(-1);
+ return -1;
}
rec->output = output;
@@ -503,7 +551,10 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
}
}
- perf_record__open(rec);
+ if (perf_record__open(rec) != 0) {
+ err = -1;
+ goto out_delete_session;
+ }
/*
* perf_session__delete(session) will be called at perf_record__exit()
@@ -513,19 +564,20 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
if (opts->pipe_output) {
err = perf_header__write_pipe(output);
if (err < 0)
- return err;
+ goto out_delete_session;
} else if (rec->file_new) {
err = perf_session__write_header(session, evsel_list,
output, false);
if (err < 0)
- return err;
+ goto out_delete_session;
}
if (!rec->no_buildid
&& !perf_header__has_feat(&session->header, HEADER_BUILD_ID)) {
pr_err("Couldn't generate buildids. "
"Use --no-buildid to profile anyway.\n");
- return -1;
+ err = -1;
+ goto out_delete_session;
}
rec->post_processing_offset = lseek(output, 0, SEEK_CUR);
@@ -533,7 +585,8 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
machine = perf_session__find_host_machine(session);
if (!machine) {
pr_err("Couldn't find native kernel information.\n");
- return -1;
+ err = -1;
+ goto out_delete_session;
}
if (opts->pipe_output) {
@@ -541,14 +594,14 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
process_synthesized_event);
if (err < 0) {
pr_err("Couldn't synthesize attrs.\n");
- return err;
+ goto out_delete_session;
}
err = perf_event__synthesize_event_types(tool, process_synthesized_event,
machine);
if (err < 0) {
pr_err("Couldn't synthesize event_types.\n");
- return err;
+ goto out_delete_session;
}
if (have_tracepoints(&evsel_list->entries)) {
@@ -564,7 +617,7 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
process_synthesized_event);
if (err <= 0) {
pr_err("Couldn't record tracing data.\n");
- return err;
+ goto out_delete_session;
}
advance_output(rec, err);
}
@@ -592,20 +645,24 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
perf_event__synthesize_guest_os);
if (!opts->target.system_wide)
- perf_event__synthesize_thread_map(tool, evsel_list->threads,
+ err = perf_event__synthesize_thread_map(tool, evsel_list->threads,
process_synthesized_event,
machine);
else
- perf_event__synthesize_threads(tool, process_synthesized_event,
+ err = perf_event__synthesize_threads(tool, process_synthesized_event,
machine);
+ if (err != 0)
+ goto out_delete_session;
+
if (rec->realtime_prio) {
struct sched_param param;
param.sched_priority = rec->realtime_prio;
if (sched_setscheduler(0, SCHED_FIFO, ¶m)) {
pr_err("Could not set realtime priority.\n");
- exit(-1);
+ err = -1;
+ goto out_delete_session;
}
}
@@ -620,7 +677,10 @@ static int __cmd_record(struct perf_record *rec, int argc, const char **argv)
for (;;) {
int hits = rec->samples;
- perf_record__mmap_read_all(rec);
+ if (perf_record__mmap_read_all(rec) < 0) {
+ err = -1;
+ goto out_delete_session;
+ }
if (hits == rec->samples) {
if (done)
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists