[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1346935540-1792-22-git-send-email-balbi@ti.com>
Date: Thu, 6 Sep 2012 15:45:40 +0300
From: Felipe Balbi <balbi@...com>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: alan@...ux.intel.com, Tony Lindgren <tony@...mide.com>,
Kevin Hilman <khilman@...com>,
Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@...ts.infradead.org>,
linux-serial@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Santosh Shilimkar <santosh.shilimkar@...com>,
Shubhrajyoti Datta <shubhrajyoti@...com>,
Sourav Poddar <sourav.poddar@...com>,
Felipe Balbi <balbi@...com>
Subject: [PATCH v4 21/21] serial: omap: enable RX and TX FIFO usage
enable RX FIFO for 16 characters and TX FIFO
for 16 spaces.
Tested-by: Shubhrajyoti D <shubhrajyoti@...com>
Signed-off-by: Felipe Balbi <balbi@...com>
---
drivers/tty/serial/omap-serial.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 164c3c9..cfd2094 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -56,8 +56,8 @@
#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7)
/* FCR register bitmasks */
-#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6
#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6)
+#define OMAP_UART_FCR_TX_FIFO_TRIG_MASK (0x3 << 4)
/* MVR register bitmasks */
#define OMAP_UART_MVR_SCHEME_SHIFT 30
@@ -834,9 +834,13 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
- /* Set receive FIFO threshold to 1 byte */
+ /* Set receive FIFO threshold to 16 characters and
+ * transmit FIFO threshold to 16 spaces
+ */
up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK;
- up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT);
+ up->fcr &= ~OMAP_UART_FCR_TX_FIFO_TRIG_MASK;
+ up->fcr |= UART_FCR6_R_TRIGGER_16 | UART_FCR6_T_TRIGGER_24 |
+ UART_FCR_ENABLE_FIFO;
serial_out(up, UART_FCR, up->fcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
--
1.7.12.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists