[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120907232241.20289.38511@nucleus>
Date: Fri, 07 Sep 2012 16:22:41 -0700
From: Mike Turquette <mturquette@...aro.org>
To: "Karicheri, Muralidharan" <m-karicheri2@...com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"artem.bityutskiy@...ux.intel.com" <artem.bityutskiy@...ux.intel.com>,
"dbaryshkov@...il.com" <dbaryshkov@...il.com>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: RE: [PATCH] mtd:nand:clk: preparation for switch to common clock
framework
Quoting Karicheri, Muralidharan (2012-09-07 14:56:22)
> Mike,
>
> How do these patch get to upstream? Does this get merged through davinci maintainer or through individual subsystem maintainers?
>
What does scripts/get_maintainer.pl tell you?
Also feel free to make my Acked-by into a Reviewed-by. I always ge
those two confused.
Regards,
Mike
cant never remembr
> Thanks.
>
> Murali Karicheri
> Software Design Engineer
>
>
> >> -----Original Message-----
> >> From: Mike Turquette [mailto:mturquette@...aro.org]
> >> Sent: Friday, September 07, 2012 5:29 PM
> >> To: Karicheri, Muralidharan; dwmw2@...radead.org; artem.bityutskiy@...ux.intel.com;
> >> dbaryshkov@...il.com; computersforpeace@...il.com; linux-mtd@...ts.infradead.org;
> >> linux-kernel@...r.kernel.org
> >> Cc: Karicheri, Muralidharan
> >> Subject: Re: [PATCH] mtd:nand:clk: preparation for switch to common clock framework
> >>
> >> Quoting Murali Karicheri (2012-08-30 11:17:04)
> >> > As a first step towards migrating davinci platforms to use common clock
> >> > framework, replace all instances of clk_enable() with clk_prepare_enable()
> >> > and clk_disable() with clk_disable_unprepare(). Until the platform is
> >> > switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
> >> > adds a might_sleep() call and would work without any issues.
> >> >
> >> > This will make it easy later to switch to common clk based implementation
> >> > of clk driver from DaVinci specific driver.
> >> >
> >> > Signed-off-by: Murali Karicheri <m-karicheri2@...com>
> >>
> >> Acked-by: Mike Turquette <mturquette@...aro.org>
> >>
> >> > ---
> >> > drivers/mtd/nand/davinci_nand.c | 6 +++---
> >> > 1 file changed, 3 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> >> > index d94b03c..6b8cf27 100644
> >> > --- a/drivers/mtd/nand/davinci_nand.c
> >> > +++ b/drivers/mtd/nand/davinci_nand.c
> >> > @@ -656,7 +656,7 @@ static int __init nand_davinci_probe(struct platform_device
> >> *pdev)
> >> > goto err_clk;
> >> > }
> >> >
> >> > - ret = clk_enable(info->clk);
> >> > + ret = clk_prepare_enable(info->clk);
> >> > if (ret < 0) {
> >> > dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
> >> > ret);
> >> > @@ -767,7 +767,7 @@ syndrome_done:
> >> >
> >> > err_scan:
> >> > err_timing:
> >> > - clk_disable(info->clk);
> >> > + clk_disable_unprepare(info->clk);
> >> >
> >> > err_clk_enable:
> >> > clk_put(info->clk);
> >> > @@ -804,7 +804,7 @@ static int __exit nand_davinci_remove(struct platform_device
> >> *pdev)
> >> >
> >> > nand_release(&info->mtd);
> >> >
> >> > - clk_disable(info->clk);
> >> > + clk_disable_unprepare(info->clk);
> >> > clk_put(info->clk);
> >> >
> >> > kfree(info);
> >> > --
> >> > 1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists