| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 09 Sep 2012 23:42:45 +0100
From: Ben Hutchings <ben@...adent.org.uk>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: torvalds@...ux-foundation.org, akpm@...ux-foundation.org,
alan@...rguk.ukuu.org.uk, Alex Deucher <alexander.deucher@....com>,
Dave Airlie <airlied@...hat.com>
Subject: [ 55/95] drm/radeon/kms: upstream atombios.h updates
3.2-stable review patch. If anyone has any objections, please let me know.
This is much larger than would normally be allowed for stable, but it's
updating the definition of an external firmware interface and not (so
far as I can see) making any changes to kernel behaviour or interfaces.
------------------
From: Alex Deucher <alexander.deucher@....com>
commit bf68adb4df2ac27a8f1b24894c007c9ef1c4195a upstream.
Signed-off-by: Alex Deucher <alexander.deucher@....com>
Signed-off-by: Dave Airlie <airlied@...hat.com>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
drivers/gpu/drm/radeon/atombios.h | 929 +++++++++++++++++++++++++++++++++++--
1 file changed, 883 insertions(+), 46 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 1b50ad8..4760466 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -101,6 +101,7 @@
#define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5)
#define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5)
#define ATOM_ENCODER_INIT (ATOM_DISABLE+7)
+#define ATOM_INIT (ATOM_DISABLE+7)
#define ATOM_GET_STATUS (ATOM_DISABLE+8)
#define ATOM_BLANKING 1
@@ -251,25 +252,25 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1
USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1
USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2
- USHORT DynamicClockGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
+ USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT MemoryPLLInit;
- USHORT AdjustDisplayPll; //only used by Bios
+ USHORT MemoryPLLInit; //Atomic Table, used only by Bios
+ USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes.
USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios
USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios
USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2
USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3
- USHORT LCD1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
+ USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
- USHORT GetConditionalGoldenSetting; //only used by Bios
+ USHORT GetConditionalGoldenSetting; //Only used by Bios
USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1
- USHORT TMDSAEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
- USHORT LVDSEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3
+ USHORT PatchMCSetting; //only used by BIOS
+ USHORT MC_SEQ_Control; //only used by BIOS
USHORT TV1OutputControl; //Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead
USHORT EnableScaler; //Atomic Table, used only by Bios
USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1
@@ -282,7 +283,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT SetCRTC_Replication; //Atomic Table, used only by Bios
USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios
- USHORT UpdateCRTC_DoubleBufferRegisters;
+ USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios
USHORT LUT_AutoFill; //Atomic Table, only used by Bios
USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios
USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1
@@ -308,27 +309,36 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1
USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1
- USHORT SetupHWAssistedI2CStatus; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
+ USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C"
USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init
USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock
- USHORT EnableYUV; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
+ USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender
USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1
USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios
USHORT DPEncoderService; //Function Table,only used by Bios
+ USHORT GetVoltageInfo; //Function Table,only used by Bios since SI
}ATOM_MASTER_LIST_OF_COMMAND_TABLES;
// For backward compatible
#define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction
-#define UNIPHYTransmitterControl DIG1TransmitterControl
-#define LVTMATransmitterControl DIG2TransmitterControl
+#define DPTranslatorControl DIG2EncoderControl
+#define UNIPHYTransmitterControl DIG1TransmitterControl
+#define LVTMATransmitterControl DIG2TransmitterControl
#define SetCRTC_DPM_State GetConditionalGoldenSetting
#define SetUniphyInstance ASIC_StaticPwrMgtStatusChange
#define HPDInterruptService ReadHWAssistedI2CStatus
#define EnableVGA_Access GetSCLKOverMCLKRatio
-#define GetDispObjectInfo EnableYUV
+#define EnableYUV GetDispObjectInfo
+#define DynamicClockGating EnableDispPowerGating
+#define SetupHWAssistedI2CStatus ComputeMemoryClockParam
+
+#define TMDSAEncoderControl PatchMCSetting
+#define LVDSEncoderControl MC_SEQ_Control
+#define LCD1OutputControl HW_Misc_Operation
+
typedef struct _ATOM_MASTER_COMMAND_TABLE
{
@@ -495,6 +505,34 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
// ucInputFlag
#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
+// use for ComputeMemoryClockParamTable
+typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1
+{
+ union
+ {
+ ULONG ulClock;
+ ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
+ };
+ UCHAR ucDllSpeed; //Output
+ UCHAR ucPostDiv; //Output
+ union{
+ UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
+ UCHAR ucPllCntlFlag; //Output:
+ };
+ UCHAR ucBWCntl;
+}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1;
+
+// definition of ucInputFlag
+#define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01
+// definition of ucPllCntlFlag
+#define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03
+#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04
+#define MPLL_CNTL_FLAG_QDR_ENABLE 0x08
+#define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10
+
+//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL
+#define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04
+
typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
{
ATOM_COMPUTE_CLOCK_FREQ ulClock;
@@ -562,6 +600,16 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS
#define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS
/****************************************************************************/
+// Structure used by EnableDispPowerGatingTable.ctb
+/****************************************************************************/
+typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1
+{
+ UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ...
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucPadding[2];
+}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1;
+
+/****************************************************************************/
// Structure used by EnableASIC_StaticPwrMgtTable.ctb
/****************************************************************************/
typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS
@@ -807,6 +855,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00
#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01
#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03
#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70
#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00
#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10
@@ -814,6 +863,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30
#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40
#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50
+#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60
typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
{
@@ -1171,6 +1221,106 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5
+{
+#if ATOM_BIG_ENDIAN
+ UCHAR ucReservd1:1;
+ UCHAR ucHPDSel:3;
+ UCHAR ucPhyClkSrcId:2;
+ UCHAR ucCoherentMode:1;
+ UCHAR ucReserved:1;
+#else
+ UCHAR ucReserved:1;
+ UCHAR ucCoherentMode:1;
+ UCHAR ucPhyClkSrcId:2;
+ UCHAR ucHPDSel:3;
+ UCHAR ucReservd1:1;
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V5;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+{
+ USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio
+ UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
+ UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx
+ UCHAR ucLaneNum; // indicate lane number 1-8
+ UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h
+ UCHAR ucDigMode; // indicate DIG mode
+ union{
+ ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+ UCHAR ucConfig;
+ };
+ UCHAR ucDigEncoderSel; // indicate DIG front end encoder
+ UCHAR ucDPLaneSet;
+ UCHAR ucReserved;
+ UCHAR ucReserved1;
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5;
+
+//ucPhyId
+#define ATOM_PHY_ID_UNIPHYA 0
+#define ATOM_PHY_ID_UNIPHYB 1
+#define ATOM_PHY_ID_UNIPHYC 2
+#define ATOM_PHY_ID_UNIPHYD 3
+#define ATOM_PHY_ID_UNIPHYE 4
+#define ATOM_PHY_ID_UNIPHYF 5
+#define ATOM_PHY_ID_UNIPHYG 6
+
+// ucDigEncoderSel
+#define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01
+#define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02
+#define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04
+#define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08
+#define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10
+#define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20
+#define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40
+
+// ucDigMode
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP 0
+#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1
+#define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2
+#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3
+#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4
+#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5
+
+// ucDPLaneSet
+#define DP_LANE_SET__0DB_0_4V 0x00
+#define DP_LANE_SET__0DB_0_6V 0x01
+#define DP_LANE_SET__0DB_0_8V 0x02
+#define DP_LANE_SET__0DB_1_2V 0x03
+#define DP_LANE_SET__3_5DB_0_4V 0x08
+#define DP_LANE_SET__3_5DB_0_6V 0x09
+#define DP_LANE_SET__3_5DB_0_8V 0x0a
+#define DP_LANE_SET__6DB_0_4V 0x10
+#define DP_LANE_SET__6DB_0_6V 0x11
+#define DP_LANE_SET__9_5DB_0_4V 0x18
+
+// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig;
+// Bit1
+#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02
+
+// Bit3:2
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02
+
+#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04
+#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08
+#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c
+// Bit6:4
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04
+
+#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50
+#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60
+
+#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5
+
+
/****************************************************************************/
// Structures used by ExternalEncoderControlTable V1.3
// ASIC Families: Evergreen, Llano, NI
@@ -1793,6 +1943,7 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
#define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00
#define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04
#define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08
+#define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL
#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF
#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0
#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00
@@ -2030,12 +2181,77 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V2
USHORT usVoltageLevel; // real voltage level
}SET_VOLTAGE_PARAMETERS_V2;
+
+typedef struct _SET_VOLTAGE_PARAMETERS_V1_3
+{
+ UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Indicate action: Set voltage level
+ USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. )
+}SET_VOLTAGE_PARAMETERS_V1_3;
+
+//ucVoltageType
+#define VOLTAGE_TYPE_VDDC 1
+#define VOLTAGE_TYPE_MVDDC 2
+#define VOLTAGE_TYPE_MVDDQ 3
+#define VOLTAGE_TYPE_VDDCI 4
+
+//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode
+#define ATOM_SET_VOLTAGE 0 //Set voltage Level
+#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator
+#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase
+#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used in SetVoltageTable v1.3
+#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID
+
+// define vitual voltage id in usVoltageLevel
+#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01
+#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02
+#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03
+#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04
+
typedef struct _SET_VOLTAGE_PS_ALLOCATION
{
SET_VOLTAGE_PARAMETERS sASICSetVoltage;
WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved;
}SET_VOLTAGE_PS_ALLOCATION;
+// New Added from SI for GetVoltageInfoTable, input parameter structure
+typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1
+{
+ UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI
+ UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info
+ USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id
+ ULONG ulReserved;
+}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID
+typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+ ULONG ulVotlageGpioState;
+ ULONG ulVoltageGPioMask;
+}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID
+typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1
+{
+ USHORT usVoltageLevel;
+ USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator
+ ULONG ulReseved;
+}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1;
+
+
+// GetVoltageInfo v1.1 ucVoltageMode
+#define ATOM_GET_VOLTAGE_VID 0x00
+#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03
+#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04
+// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state
+#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10
+
+// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state
+#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11
+// undefined power state
+#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12
+#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13
+
/****************************************************************************/
// Structures used by TVEncoderControlTable
/****************************************************************************/
@@ -2065,9 +2281,9 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios
USHORT StandardVESA_Timing; // Only used by Bios
USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4
- USHORT DAC_Info; // Will be obsolete from R600
+ USHORT PaletteData; // Only used by BIOS
USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info
- USHORT TMDS_Info; // Will be obsolete from R600
+ USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1
USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1
USHORT SupportedDevicesInfo; // Will be obsolete from R600
USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600
@@ -2096,15 +2312,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1
}ATOM_MASTER_LIST_OF_DATA_TABLES;
-// For backward compatible
-#define LVDS_Info LCD_Info
-
typedef struct _ATOM_MASTER_DATA_TABLE
{
ATOM_COMMON_TABLE_HEADER sHeader;
ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables;
}ATOM_MASTER_DATA_TABLE;
+// For backward compatible
+#define LVDS_Info LCD_Info
+#define DAC_Info PaletteData
+#define TMDS_Info DIGTransmitterInfo
/****************************************************************************/
// Structure used in MultimediaCapabilityInfoTable
@@ -2171,7 +2388,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
typedef struct _ATOM_FIRMWARE_CAPABILITY
{
#if ATOM_BIG_ENDIAN
- USHORT Reserved:3;
+ USHORT Reserved:1;
+ USHORT SCL2Redefined:1;
+ USHORT PostWithoutModeSet:1;
USHORT HyperMemory_Size:4;
USHORT HyperMemory_Support:1;
USHORT PPMode_Assigned:1;
@@ -2193,7 +2412,9 @@ typedef struct _ATOM_FIRMWARE_CAPABILITY
USHORT PPMode_Assigned:1;
USHORT HyperMemory_Support:1;
USHORT HyperMemory_Size:4;
- USHORT Reserved:3;
+ USHORT PostWithoutModeSet:1;
+ USHORT SCL2Redefined:1;
+ USHORT Reserved:1;
#endif
}ATOM_FIRMWARE_CAPABILITY;
@@ -2418,7 +2639,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit
ULONG ulReserved4; //Was ulAsicMaximumVoltage
ULONG ulMinPixelClockPLL_Output; //In 10Khz unit
- ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+ UCHAR ucRemoteDisplayConfig;
+ UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC
@@ -2438,6 +2660,11 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2
#define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2
+
+// definition of ucRemoteDisplayConfig
+#define REMOTE_DISPLAY_DISABLE 0x00
+#define REMOTE_DISPLAY_ENABLE 0x01
+
/****************************************************************************/
// Structures used in IntegratedSystemInfoTable
/****************************************************************************/
@@ -2660,8 +2887,9 @@ usMinDownStreamHTLinkWidth: same as above.
#define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2
#define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3
#define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5
-#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code
+#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code
#define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001
#define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002
@@ -2753,6 +2981,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5
#define ASIC_INT_DIG4_ENCODER_ID 0x0b
#define ASIC_INT_DIG5_ENCODER_ID 0x0c
#define ASIC_INT_DIG6_ENCODER_ID 0x0d
+#define ASIC_INT_DIG7_ENCODER_ID 0x0e
//define Encoder attribute
#define ATOM_ANALOG_ENCODER 0
@@ -3226,15 +3455,23 @@ typedef struct _ATOM_LCD_INFO_V13
UCHAR ucPowerSequenceDIGONtoDE_in4Ms;
UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms;
- UCHAR ucPowerSequenceDEtoDIGON_in4Ms;
UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms;
+ UCHAR ucPowerSequenceDEtoDIGON_in4Ms;
UCHAR ucOffDelay_in4Ms;
UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms;
UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms;
UCHAR ucReserved1;
- ULONG ulReserved[4];
+ UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh
+ UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h
+ UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h
+ UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h
+
+ USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode.
+ UCHAR uceDPToLVDSRxId;
+ UCHAR ucLcdReservd;
+ ULONG ulReserved[2];
}ATOM_LCD_INFO_V13;
#define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13
@@ -3273,6 +3510,11 @@ typedef struct _ATOM_LCD_INFO_V13
//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
#define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version
+//uceDPToLVDSRxId
+#define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip
+#define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init
+#define eDP_TO_LVDS_RT_ID 0x02 // RT tanslator which require AMD SW init
+
typedef struct _ATOM_PATCH_RECORD_MODE
{
UCHAR ucRecordType;
@@ -3317,6 +3559,7 @@ typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD
#define LCD_CAP_RECORD_TYPE 3
#define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4
#define LCD_PANEL_RESOLUTION_RECORD_TYPE 5
+#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6
#define ATOM_RECORD_END_TYPE 0xFF
/****************************Spread Spectrum Info Table Definitions **********************/
@@ -3528,6 +3771,7 @@ else //Non VGA case
CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/
+/***********************************************************************************/
#define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1
typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO
@@ -3818,13 +4062,17 @@ typedef struct _EXT_DISPLAY_PATH
ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping;
ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping;
};
- UCHAR ucReserved;
- USHORT usReserved[2];
+ UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
+ USHORT usCaps;
+ USHORT usReserved;
}EXT_DISPLAY_PATH;
#define NUMBER_OF_UCHAR_FOR_GUID 16
#define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7
+//usCaps
+#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01
+
typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -3832,7 +4080,9 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries.
UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0.
UCHAR uc3DStereoPinId; // use for eDP panel
- UCHAR Reserved [6]; // for potential expansion
+ UCHAR ucRemoteDisplayConfig;
+ UCHAR uceDPToLVDSRxId;
+ UCHAR Reserved[4]; // for potential expansion
}ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
//Related definitions, all records are different but they have a commond header
@@ -3977,6 +4227,7 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
#define GPIO_PIN_STATE_ACTIVE_HIGH 0x1
// Indexes to GPIO array in GLSync record
+// GLSync record is for Frame Lock/Gen Lock feature.
#define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0
#define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1
#define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2
@@ -3984,7 +4235,9 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD
#define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4
#define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5
#define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6
-#define ATOM_GPIO_INDEX_GLSYNC_MAX 7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7
+#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8
+#define ATOM_GPIO_INDEX_GLSYNC_MAX 9
typedef struct _ATOM_ENCODER_DVO_CF_RECORD
{
@@ -3994,7 +4247,8 @@ typedef struct _ATOM_ENCODER_DVO_CF_RECORD
}ATOM_ENCODER_DVO_CF_RECORD;
// Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap
-#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path
+#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder
+#define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
typedef struct _ATOM_ENCODER_CAP_RECORD
{
@@ -4003,11 +4257,13 @@ typedef struct _ATOM_ENCODER_CAP_RECORD
USHORT usEncoderCap;
struct {
#if ATOM_BIG_ENDIAN
- USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
+ USHORT usReserved:14; // Bit1-15 may be defined for other capability in future
+ USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable
USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
#else
USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability.
- USHORT usReserved:15; // Bit1-15 may be defined for other capability in future
+ USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable
+ USHORT usReserved:14; // Bit1-15 may be defined for other capability in future
#endif
};
};
@@ -4157,6 +4413,7 @@ typedef struct _ATOM_VOLTAGE_CONTROL
#define VOLTAGE_CONTROL_ID_VT1556M 0x07
#define VOLTAGE_CONTROL_ID_CHL822x 0x08
#define VOLTAGE_CONTROL_ID_VT1586M 0x09
+#define VOLTAGE_CONTROL_ID_UP1637 0x0A
typedef struct _ATOM_VOLTAGE_OBJECT
{
@@ -4193,6 +4450,69 @@ typedef struct _ATOM_LEAKID_VOLTAGE
USHORT usVoltage;
}ATOM_LEAKID_VOLTAGE;
+typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{
+ UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI
+ UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase
+ USHORT usSize; //Size of Object
+}ATOM_VOLTAGE_OBJECT_HEADER_V3;
+
+typedef struct _VOLTAGE_LUT_ENTRY_V2
+{
+ ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register
+ USHORT usVoltageValue; // The corresponding Voltage Value, in mV
+}VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2
+{
+ USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register
+ USHORT usVoltageId;
+ USHORT usLeakageId; // The corresponding Voltage Value, in mV
+}LEAKAGE_VOLTAGE_LUT_ENTRY_V2;
+
+typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id
+ UCHAR ucVoltageControlI2cLine;
+ UCHAR ucVoltageControlAddress;
+ UCHAR ucVoltageControlOffset;
+ ULONG ulReserved;
+ VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff
+}ATOM_I2C_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode
+ UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table
+ UCHAR ucPhaseDelay; // phase delay in unit of micro second
+ UCHAR ucReserved;
+ ULONG ulGpioMaskVal; // GPIO Mask value
+ VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1];
+}ATOM_GPIO_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3
+{
+ ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader;
+ UCHAR ucLeakageCntlId; // default is 0
+ UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table
+ UCHAR ucReserved[2];
+ ULONG ulMaxVoltageLevel;
+ LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1];
+}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3;
+
+typedef union _ATOM_VOLTAGE_OBJECT_V3{
+ ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj;
+ ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj;
+ ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj;
+}ATOM_VOLTAGE_OBJECT_V3;
+
+typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control
+}ATOM_VOLTAGE_OBJECT_INFO_V3_1;
+
typedef struct _ATOM_ASIC_PROFILE_VOLTAGE
{
UCHAR ucProfileId;
@@ -4305,7 +4625,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
USHORT usHDMISSpreadRateIn10Hz;
USHORT usDVISSPercentage;
USHORT usDVISSpreadRateIn10Hz;
- ULONG ulReserved3[21];
+ ULONG SclkDpmBoostMargin;
+ ULONG SclkDpmThrottleMargin;
+ USHORT SclkDpmTdpLimitPG;
+ USHORT SclkDpmTdpLimitBoost;
+ ULONG ulBoostEngineCLock;
+ UCHAR ulBoostVid_2bit;
+ UCHAR EnableBoost;
+ USHORT GnbTdpLimit;
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucLVDSReserved;
+ ULONG ulReserved3[15];
ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
}ATOM_INTEGRATED_SYSTEM_INFO_V6;
@@ -4313,9 +4644,16 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6
#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
#define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08
-// ulOtherDisplayMisc
-#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01
+//ucLVDSMisc:
+#define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01
+#define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02
+#define SYS_INFO_LVDSMISC__888_BPC 0x04
+#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08
+#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10
+// not used any more
+#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04
+#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08
/**********************************************************************************************************************
ATOM_INTEGRATED_SYSTEM_INFO_V6 Description
@@ -4384,7 +4722,208 @@ ucUMAChannelNumber: System memory channel numbers.
ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
-sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
+ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
+ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
+ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
+ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns.
+ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns.
+usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting.
+usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
+usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+**********************************************************************************************************************/
+
+// this Table is used for Liano/Ontario APU
+typedef struct _ATOM_FUSION_SYSTEM_INFO_V1
+{
+ ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo;
+ ULONG ulPowerplayTable[128];
+}ATOM_FUSION_SYSTEM_INFO_V1;
+/**********************************************************************************************************************
+ ATOM_FUSION_SYSTEM_INFO_V1 Description
+sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition.
+ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0]
+**********************************************************************************************************************/
+
+// this IntegrateSystemInfoTable is used for Trinity APU
+typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ ULONG ulBootUpEngineClock;
+ ULONG ulDentistVCOFreq;
+ ULONG ulBootUpUMAClock;
+ ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4];
+ ULONG ulBootUpReqDisplayVector;
+ ULONG ulOtherDisplayMisc;
+ ULONG ulGPUCapInfo;
+ ULONG ulSB_MMIO_Base_Addr;
+ USHORT usRequestedPWMFreqInHz;
+ UCHAR ucHtcTmpLmt;
+ UCHAR ucHtcHystLmt;
+ ULONG ulMinEngineClock;
+ ULONG ulSystemConfig;
+ ULONG ulCPUCapInfo;
+ USHORT usNBP0Voltage;
+ USHORT usNBP1Voltage;
+ USHORT usBootUpNBVoltage;
+ USHORT usExtDispConnInfoOffset;
+ USHORT usPanelRefreshRateRange;
+ UCHAR ucMemoryType;
+ UCHAR ucUMAChannelNumber;
+ UCHAR strVBIOSMsg[40];
+ ULONG ulReserved[20];
+ ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5];
+ ULONG ulGMCRestoreResetTime;
+ ULONG ulMinimumNClk;
+ ULONG ulIdleNClk;
+ ULONG ulDDR_DLL_PowerUpTime;
+ ULONG ulDDR_PLL_PowerUpTime;
+ USHORT usPCIEClkSSPercentage;
+ USHORT usPCIEClkSSType;
+ USHORT usLvdsSSPercentage;
+ USHORT usLvdsSSpreadRateIn10Hz;
+ USHORT usHDMISSPercentage;
+ USHORT usHDMISSpreadRateIn10Hz;
+ USHORT usDVISSPercentage;
+ USHORT usDVISSpreadRateIn10Hz;
+ ULONG SclkDpmBoostMargin;
+ ULONG SclkDpmThrottleMargin;
+ USHORT SclkDpmTdpLimitPG;
+ USHORT SclkDpmTdpLimitBoost;
+ ULONG ulBoostEngineCLock;
+ UCHAR ulBoostVid_2bit;
+ UCHAR EnableBoost;
+ USHORT GnbTdpLimit;
+ USHORT usMaxLVDSPclkFreqInSingleLink;
+ UCHAR ucLvdsMisc;
+ UCHAR ucLVDSReserved;
+ UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms;
+ UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms;
+ UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms;
+ UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms;
+ UCHAR ucLVDSOffToOnDelay_in4Ms;
+ UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms;
+ UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms;
+ UCHAR ucLVDSReserved1;
+ ULONG ulLCDBitDepthControlVal;
+ ULONG ulNbpStateMemclkFreq[4];
+ USHORT usNBP2Voltage;
+ USHORT usNBP3Voltage;
+ ULONG ulNbpStateNClkFreq[4];
+ UCHAR ucNBDPMEnable;
+ UCHAR ucReserved[3];
+ UCHAR ucDPMState0VclkFid;
+ UCHAR ucDPMState0DclkFid;
+ UCHAR ucDPMState1VclkFid;
+ UCHAR ucDPMState1DclkFid;
+ UCHAR ucDPMState2VclkFid;
+ UCHAR ucDPMState2DclkFid;
+ UCHAR ucDPMState3VclkFid;
+ UCHAR ucDPMState3DclkFid;
+ ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo;
+}ATOM_INTEGRATED_SYSTEM_INFO_V1_7;
+
+// ulOtherDisplayMisc
+#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01
+#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02
+#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04
+#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08
+
+// ulGPUCapInfo
+#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01
+#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02
+#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08
+
+/**********************************************************************************************************************
+ ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description
+ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock
+ulDentistVCOFreq: Dentist VCO clock in 10kHz unit.
+ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit.
+sDISPCLK_Voltage: Report Display clock voltage requirement.
+
+ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects:
+ ATOM_DEVICE_CRT1_SUPPORT 0x0001
+ ATOM_DEVICE_DFP1_SUPPORT 0x0008
+ ATOM_DEVICE_DFP6_SUPPORT 0x0040
+ ATOM_DEVICE_DFP2_SUPPORT 0x0080
+ ATOM_DEVICE_DFP3_SUPPORT 0x0200
+ ATOM_DEVICE_DFP4_SUPPORT 0x0400
+ ATOM_DEVICE_DFP5_SUPPORT 0x0800
+ ATOM_DEVICE_LCD1_SUPPORT 0x0002
+ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS.
+ =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS.
+ bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS
+ =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS
+ bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS
+ =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS
+ bit[3]=0: VBIOS fast boot is disable
+ =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open)
+ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode.
+ =1: TMDS/HDMI Coherent Mode use signel PLL mode.
+ bit[1]=0: DP mode use cascade PLL mode ( New for Trinity )
+ =1: DP mode use single PLL mode
+ bit[3]=0: Enable AUX HW mode detection logic
+ =1: Disable AUX HW mode detection logic
+
+ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage.
+
+usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW).
+ Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0;
+
+ When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below:
+ 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use;
+ VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result,
+ Changing BL using VBIOS function is functional in both driver and non-driver present environment;
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating
+ that BL control from GPU is expected.
+ VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1
+ Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but
+ it's per platform
+ and enabling VariBri under the driver environment from PP table is optional.
+
+ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt.
+ Threshold on value to enter HTC_active state.
+ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt.
+ To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt.
+ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings.
+ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled
+ =1: PCIE Power Gating Enabled
+ Bit[1]=0: DDR-DLL shut-down feature disabled.
+ 1: DDR-DLL shut-down feature enabled.
+ Bit[2]=0: DDR-PLL Power down feature disabled.
+ 1: DDR-PLL Power down feature enabled.
+ulCPUCapInfo: TBD
+usNBP0Voltage: VID for voltage on NB P0 State
+usNBP1Voltage: VID for voltage on NB P1 State
+usNBP2Voltage: VID for voltage on NB P2 State
+usNBP3Voltage: VID for voltage on NB P3 State
+usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement.
+usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure
+usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set
+ to indicate a range.
+ SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004
+ SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008
+ SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010
+ SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020
+ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved.
+ucUMAChannelNumber: System memory channel numbers.
+ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default
+ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback.
+ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
+sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high
ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns.
ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz.
ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
@@ -4398,6 +4937,41 @@ usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%;
usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting.
usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting.
+usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz
+ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode
+ [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped
+ [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color
+ [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used
+ [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low )
+ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ).
+ =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ).
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off.
+ =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off.
+ =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active.
+ =0 means to use VBIOS default delay which is 125 ( 500ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOnVARY_BLtoBLON_in4Ms: LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ucLVDSPwrOffBLONtoVARY_BL_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off.
+ =0 means to use VBIOS default delay which is 0 ( 0ms ).
+ This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable.
+
+ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate.
+
**********************************************************************************************************************/
/**************************************************************************/
@@ -4459,6 +5033,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT
#define ASIC_INTERNAL_SS_ON_DP 7
#define ASIC_INTERNAL_SS_ON_DCPLL 8
#define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9
+#define ASIC_INTERNAL_VCE_SS 10
typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2
{
@@ -4520,7 +5095,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
#define ATOM_DOS_MODE_INFO_DEF 7
#define ATOM_I2C_CHANNEL_STATUS_DEF 8
#define ATOM_I2C_CHANNEL_STATUS1_DEF 9
-
+#define ATOM_INTERNAL_TIMER_DEF 10
// BIOS_0_SCRATCH Definition
#define ATOM_S0_CRT1_MONO 0x00000001L
@@ -4648,6 +5223,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
#define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C
#define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10
+#define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode
#define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20
#define ATOM_S2_ROTATION_STATE_MASKb3 0xC0
@@ -5038,6 +5614,23 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3
USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0.
}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3;
+typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4
+{
+ USHORT usHight; // Image Hight
+ USHORT usWidth; // Image Width
+ USHORT usGraphPitch;
+ UCHAR ucColorDepth;
+ UCHAR ucPixelFormat;
+ UCHAR ucSurface; // Surface 1 or 2
+ UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE
+ UCHAR ucModeType;
+ UCHAR ucReserved;
+}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4;
+
+// ucEnable
+#define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f
+#define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10
+
typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
{
ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface;
@@ -5057,6 +5650,58 @@ typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS
USHORT usY_Size;
}GET_DISPLAY_SURFACE_SIZE_PARAMETERS;
+typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2
+{
+ union{
+ USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC
+ USHORT usSurface;
+ };
+ USHORT usY_Size;
+ USHORT usDispXStart;
+ USHORT usDispYStart;
+}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2;
+
+
+typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3
+{
+ UCHAR ucLutId;
+ UCHAR ucAction;
+ USHORT usLutStartIndex;
+ USHORT usLutLength;
+ USHORT usLutOffsetInVram;
+}PALETTE_DATA_CONTROL_PARAMETERS_V3;
+
+// ucAction:
+#define PALETTE_DATA_AUTO_FILL 1
+#define PALETTE_DATA_READ 2
+#define PALETTE_DATA_WRITE 3
+
+
+typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2
+{
+ UCHAR ucInterruptId;
+ UCHAR ucServiceId;
+ UCHAR ucStatus;
+ UCHAR ucReserved;
+}INTERRUPT_SERVICE_PARAMETER_V2;
+
+// ucInterruptId
+#define HDP1_INTERRUPT_ID 1
+#define HDP2_INTERRUPT_ID 2
+#define HDP3_INTERRUPT_ID 3
+#define HDP4_INTERRUPT_ID 4
+#define HDP5_INTERRUPT_ID 5
+#define HDP6_INTERRUPT_ID 6
+#define SW_INTERRUPT_ID 11
+
+// ucAction
+#define INTERRUPT_SERVICE_GEN_SW_INT 1
+#define INTERRUPT_SERVICE_GET_STATUS 2
+
+ // ucStatus
+#define INTERRUPT_STATUS__INT_TRIGGER 1
+#define INTERRUPT_STATUS__HPD_HIGH 2
+
typedef struct _INDIRECT_IO_ACCESS
{
ATOM_COMMON_TABLE_HEADER sHeader;
@@ -5189,7 +5834,7 @@ typedef struct _ATOM_INIT_REG_BLOCK{
#define END_OF_REG_INDEX_BLOCK 0x0ffff
#define END_OF_REG_DATA_BLOCK 0x00000000
-#define ATOM_INIT_REG_MASK_FLAG 0x80
+#define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS
#define CLOCK_RANGE_HIGHEST 0x00ffffff
#define VALUE_DWORD SIZEOF ULONG
@@ -5229,6 +5874,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE
#define _128Mx8 0x51
#define _128Mx16 0x52
#define _256Mx8 0x61
+#define _256Mx16 0x62
#define SAMSUNG 0x1
#define INFINEON 0x2
@@ -5585,7 +6231,7 @@ typedef struct _ATOM_VRAM_MODULE_V7
ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP
USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7
USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS)
- USHORT usReserved;
+ USHORT usEnableChannels; // bit vector which indicate which channels are enabled
UCHAR ucExtMemoryID; // Current memory module ID
UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5
UCHAR ucChannelNum; // Number of mem. channels supported in this module
@@ -5597,7 +6243,8 @@ typedef struct _ATOM_VRAM_MODULE_V7
UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble
UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
- UCHAR ucReserved[3];
+ USHORT usSEQSettingOffset;
+ UCHAR ucReserved;
// Memory Module specific values
USHORT usEMRS2Value; // EMRS2/MR2 Value.
USHORT usEMRS3Value; // EMRS3/MR3 Value.
@@ -5633,10 +6280,10 @@ typedef struct _ATOM_VRAM_INFO_V3
typedef struct _ATOM_VRAM_INFO_V4
{
ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
- USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
- USHORT usRerseved;
- UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usRerseved;
+ UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3
ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21]
UCHAR ucReservde[4];
UCHAR ucNumOfVRAMModule;
@@ -5648,9 +6295,10 @@ typedef struct _ATOM_VRAM_INFO_V4
typedef struct _ATOM_VRAM_INFO_HEADER_V2_1
{
ATOM_COMMON_TABLE_HEADER sHeader;
- USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
- USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
- USHORT usReserved[4];
+ USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting
+ USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting
+ USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings
+ USHORT usReserved[3];
UCHAR ucNumOfVRAMModule; // indicate number of VRAM module
UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list
UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version
@@ -5935,6 +6583,52 @@ typedef struct _ATOM_DISP_OUT_INFO_V2
ASIC_ENCODER_INFO asEncoderInfo[1];
}ATOM_DISP_OUT_INFO_V2;
+
+typedef struct _ATOM_DISP_CLOCK_ID {
+ UCHAR ucPpllId;
+ UCHAR ucPpllAttribute;
+}ATOM_DISP_CLOCK_ID;
+
+// ucPpllAttribute
+#define CLOCK_SOURCE_SHAREABLE 0x01
+#define CLOCK_SOURCE_DP_MODE 0x02
+#define CLOCK_SOURCE_NONE_DP_MODE 0x04
+
+//DispOutInfoTable
+typedef struct _ASIC_TRANSMITTER_INFO_V2
+{
+ USHORT usTransmitterObjId;
+ USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object
+ UCHAR ucTransmitterCmdTblId;
+ UCHAR ucConfig;
+ UCHAR ucEncoderID; // available 1st encoder ( default )
+ UCHAR ucOptionEncoderID; // available 2nd encoder ( optional )
+ UCHAR uc2ndEncoderID;
+ UCHAR ucReserved;
+}ASIC_TRANSMITTER_INFO_V2;
+
+typedef struct _ATOM_DISP_OUT_INFO_V3
+{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT ptrTransmitterInfo;
+ USHORT ptrEncoderInfo;
+ USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary.
+ USHORT usReserved;
+ UCHAR ucDCERevision;
+ UCHAR ucMaxDispEngineNum;
+ UCHAR ucMaxActiveDispEngineNum;
+ UCHAR ucMaxPPLLNum;
+ UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE
+ UCHAR ucReserved[3];
+ ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only
+}ATOM_DISP_OUT_INFO_V3;
+
+typedef enum CORE_REF_CLK_SOURCE{
+ CLOCK_SRC_XTALIN=0,
+ CLOCK_SRC_XO_IN=1,
+ CLOCK_SRC_XO_IN2=2,
+}CORE_REF_CLK_SOURCE;
+
// DispDevicePriorityInfo
typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO
{
@@ -6070,6 +6764,39 @@ typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS
#define HW_I2C_READ 0
#define I2C_2BYTE_ADDR 0x02
+/****************************************************************************/
+// Structures used by HW_Misc_OperationTable
+/****************************************************************************/
+typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1
+{
+ UCHAR ucCmd; // Input: To tell which action to take
+ UCHAR ucReserved[3];
+ ULONG ulReserved;
+}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1;
+
+typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1
+{
+ UCHAR ucReturnCode; // Output: Return value base on action was taken
+ UCHAR ucReserved[3];
+ ULONG ulReserved;
+}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1;
+
+// Actions code
+#define ATOM_GET_SDI_SUPPORT 0xF0
+
+// Return code
+#define ATOM_UNKNOWN_CMD 0
+#define ATOM_FEATURE_NOT_SUPPORTED 1
+#define ATOM_FEATURE_SUPPORTED 2
+
+typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION
+{
+ ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output;
+ PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved;
+}ATOM_HW_MISC_OPERATION_PS_ALLOCATION;
+
+/****************************************************************************/
+
typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
{
UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ...
@@ -6090,6 +6817,52 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2
#define SELECT_CRTC_PIXEL_RATE 7
#define SELECT_VGA_BLK 8
+// DIGTransmitterInfoTable structure used to program UNIPHY settings
+typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{
+ ATOM_COMMON_TABLE_HEADER sHeader;
+ USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock
+ USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info
+ USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range
+ USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info
+ USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings
+}DIG_TRANSMITTER_INFO_HEADER_V3_1;
+
+typedef struct _CLOCK_CONDITION_REGESTER_INFO{
+ USHORT usRegisterIndex;
+ UCHAR ucStartBit;
+ UCHAR ucEndBit;
+}CLOCK_CONDITION_REGESTER_INFO;
+
+typedef struct _CLOCK_CONDITION_SETTING_ENTRY{
+ USHORT usMaxClockFreq;
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ ULONG ulAnalogSetting[1];
+}CLOCK_CONDITION_SETTING_ENTRY;
+
+typedef struct _CLOCK_CONDITION_SETTING_INFO{
+ USHORT usEntrySize;
+ CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1];
+}CLOCK_CONDITION_SETTING_INFO;
+
+typedef struct _PHY_CONDITION_REG_VAL{
+ ULONG ulCondition;
+ ULONG ulRegVal;
+}PHY_CONDITION_REG_VAL;
+
+typedef struct _PHY_CONDITION_REG_INFO{
+ USHORT usRegIndex;
+ USHORT usSize;
+ PHY_CONDITION_REG_VAL asRegVal[1];
+}PHY_CONDITION_REG_INFO;
+
+typedef struct _PHY_ANALOG_SETTING_INFO{
+ UCHAR ucEncodeMode;
+ UCHAR ucPhySel;
+ USHORT usSize;
+ PHY_CONDITION_REG_INFO asAnalogSetting[1];
+}PHY_ANALOG_SETTING_INFO;
+
/****************************************************************************/
//Portion VI: Definitinos for vbios MC scratch registers that driver used
/****************************************************************************/
@@ -7020,4 +7793,68 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
#pragma pack() // BIOS data must use byte aligment
+//
+// AMD ACPI Table
+//
+#pragma pack(1)
+
+typedef struct {
+ ULONG Signature;
+ ULONG TableLength; //Length
+ UCHAR Revision;
+ UCHAR Checksum;
+ UCHAR OemId[6];
+ UCHAR OemTableId[8]; //UINT64 OemTableId;
+ ULONG OemRevision;
+ ULONG CreatorId;
+ ULONG CreatorRevision;
+} AMD_ACPI_DESCRIPTION_HEADER;
+/*
+//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h
+typedef struct {
+ UINT32 Signature; //0x0
+ UINT32 Length; //0x4
+ UINT8 Revision; //0x8
+ UINT8 Checksum; //0x9
+ UINT8 OemId[6]; //0xA
+ UINT64 OemTableId; //0x10
+ UINT32 OemRevision; //0x18
+ UINT32 CreatorId; //0x1C
+ UINT32 CreatorRevision; //0x20
+}EFI_ACPI_DESCRIPTION_HEADER;
+*/
+typedef struct {
+ AMD_ACPI_DESCRIPTION_HEADER SHeader;
+ UCHAR TableUUID[16]; //0x24
+ ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
+ ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+ ULONG Reserved[4]; //0x3C
+}UEFI_ACPI_VFCT;
+
+typedef struct {
+ ULONG PCIBus; //0x4C
+ ULONG PCIDevice; //0x50
+ ULONG PCIFunction; //0x54
+ USHORT VendorID; //0x58
+ USHORT DeviceID; //0x5A
+ USHORT SSVID; //0x5C
+ USHORT SSID; //0x5E
+ ULONG Revision; //0x60
+ ULONG ImageLength; //0x64
+}VFCT_IMAGE_HEADER;
+
+
+typedef struct {
+ VFCT_IMAGE_HEADER VbiosHeader;
+ UCHAR VbiosContent[1];
+}GOP_VBIOS_CONTENT;
+
+typedef struct {
+ VFCT_IMAGE_HEADER Lib1Header;
+ UCHAR Lib1Content[1];
+}GOP_LIB1_CONTENT;
+
+#pragma pack()
+
+
#endif /* _ATOMBIOS_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists