| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <504D4873.2010508@samsung.com>
Date: Mon, 10 Sep 2012 10:54:59 +0900
From: jonghwa3.lee@...sung.com
To: Mike Turquette <mturquette@...aro.org>
Cc: linux-kernel@...r.kernel.org, Arnd Bergmann <arnd@...db.de>,
H Hartley Sweeten <hsweeten@...ionengravers.com>
Subject: Re: [PATCH] clock: max77686: Add driver for Maxim 77686 32Khz crystal
oscillator.
On 2012년 09월 07일 09:04, Mike Turquette wrote:
> Quoting Jonghwa Lee (2012-08-28 01:54:28)
>> This patch supports max77686 mfd's clock driver using common clock frame work.
>> max77686 has 3 clock ouputs which all are generated from crystal oscillator and
>> SOC can enable/disable them via I2C bus. All clocks are fixed-rate clock sources
>> so that it doesn't supply interface for changing clock rate.
>> Driver uses regmap API to communicate with internal register.
>>
>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@...sung.com>
>
> Looks good. I've taken this into clk-next.
>
> Regards,
> Mike
>
Thanks,
Best Regards,
Jonghwa
>> ---
>> v5
>> - Add registering failure handle for each clocks to prevent memory leak.
>> - Update to use the latest clk_register. (Add clk_init_data).
>> - Rename Kconfig menu's name and replace its position.
>>
>> v4
>> https://lkml.org/lkml/2012/6/27/183
>>
>> drivers/clk/Kconfig | 6 +
>> drivers/clk/Makefile | 1 +
>> drivers/clk/clk-max77686.c | 244 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 251 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/clk/clk-max77686.c
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 7f0b5ca..f300ec7 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -40,4 +40,10 @@ config COMMON_CLK_WM831X
>> Supports the clocking subsystem of the WM831x/2x series of
>> PMICs from Wolfson Microlectronics.
>>
>> +config COMMON_CLK_MAX77686
>> + tristate "Clock driver for Maxim 77686 MFD"
>> + depends on MFD_MAX77686
>> + ---help---
>> + This driver supports Maxim 77686 crystal oscillator clock.
>> +
>> endmenu
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index 5869ea3..97f5c57 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -13,3 +13,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/
>>
>> # Chip specific
>> obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
>> +obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
>> diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
>> new file mode 100644
>> index 0000000..ac5f543
>> --- /dev/null
>> +++ b/drivers/clk/clk-max77686.c
>> @@ -0,0 +1,244 @@
>> +/*
>> + * clk-max77686.c - Clock driver for Maxim 77686
>> + *
>> + * Copyright (C) 2012 Samsung Electornics
>> + * Jonghwa Lee <jonghwa3.lee@...sung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/slab.h>
>> +#include <linux/err.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mfd/max77686.h>
>> +#include <linux/mfd/max77686-private.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/mutex.h>
>> +#include <linux/clkdev.h>
>> +
>> +enum {
>> + MAX77686_CLK_AP = 0,
>> + MAX77686_CLK_CP,
>> + MAX77686_CLK_PMIC,
>> + MAX77686_CLKS_NUM,
>> +};
>> +
>> +struct max77686_clk {
>> + struct max77686_dev *iodev;
>> + u32 mask;
>> + struct clk_hw hw;
>> + struct clk_lookup *lookup;
>> +};
>> +
>> +static struct max77686_clk *get_max77686_clk(struct clk_hw *hw)
>> +{
>> + return container_of(hw, struct max77686_clk, hw);
>> +}
>> +
>> +static int max77686_clk_prepare(struct clk_hw *hw)
>> +{
>> + struct max77686_clk *max77686;
>> + int ret;
>> +
>> + max77686 = get_max77686_clk(hw);
>> + if (!max77686)
>> + return -ENOMEM;
>> +
>> + ret = regmap_update_bits(max77686->iodev->regmap,
>> + MAX77686_REG_32KHZ, max77686->mask, max77686->mask);
>> +
>> + return ret;
>> +}
>> +
>> +static void max77686_clk_unprepare(struct clk_hw *hw)
>> +{
>> + struct max77686_clk *max77686;
>> +
>> + max77686 = get_max77686_clk(hw);
>> + if (!max77686)
>> + return;
>> +
>> + regmap_update_bits(max77686->iodev->regmap,
>> + MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
>> +}
>> +
>> +static int max77686_clk_is_enabled(struct clk_hw *hw)
>> +{
>> + struct max77686_clk *max77686;
>> + int ret;
>> + u32 val;
>> +
>> + max77686 = get_max77686_clk(hw);
>> + if (!max77686)
>> + return -ENOMEM;
>> +
>> + ret = regmap_read(max77686->iodev->regmap,
>> + MAX77686_REG_32KHZ, &val);
>> +
>> + if (ret < 0)
>> + return -EINVAL;
>> +
>> + return val & max77686->mask;
>> +}
>> +
>> +static struct clk_ops max77686_clk_ops = {
>> + .prepare = max77686_clk_prepare,
>> + .unprepare = max77686_clk_unprepare,
>> + .is_enabled = max77686_clk_is_enabled,
>> +};
>> +
>> +static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
>> + [MAX77686_CLK_AP] = {
>> + .name = "32khz_ap",
>> + .ops = &max77686_clk_ops,
>> + .flags = CLK_IS_ROOT,
>> + },
>> + [MAX77686_CLK_CP] = {
>> + .name = "32khz_cp",
>> + .ops = &max77686_clk_ops,
>> + .flags = CLK_IS_ROOT,
>> + },
>> + [MAX77686_CLK_PMIC] = {
>> + .name = "32khz_pmic",
>> + .ops = &max77686_clk_ops,
>> + .flags = CLK_IS_ROOT,
>> + },
>> +};
>> +
>> +static int max77686_clk_register(struct device *dev,
>> + struct max77686_clk *max77686)
>> +{
>> + struct clk *clk;
>> + struct clk_hw *hw = &max77686->hw;
>> +
>> + clk = clk_register(dev, hw);
>> +
>> + if (IS_ERR(clk))
>> + return -ENOMEM;
>> +
>> + max77686->lookup = devm_kzalloc(dev, sizeof(struct clk_lookup),
>> + GFP_KERNEL);
>> + if (IS_ERR(max77686->lookup))
>> + return -ENOMEM;
>> +
>> + max77686->lookup->con_id = hw->init->name;
>> + max77686->lookup->clk = clk;
>> +
>> + clkdev_add(max77686->lookup);
>> +
>> + return 0;
>> +}
>> +
>> +static __devinit int max77686_clk_probe(struct platform_device *pdev)
>> +{
>> + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
>> + struct max77686_clk **max77686_clks;
>> + int i, ret;
>> +
>> + max77686_clks = devm_kzalloc(&pdev->dev, sizeof(struct max77686_clk *)
>> + * MAX77686_CLKS_NUM, GFP_KERNEL);
>> + if (IS_ERR(max77686_clks))
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < MAX77686_CLKS_NUM; i++) {
>> + max77686_clks[i] = devm_kzalloc(&pdev->dev,
>> + sizeof(struct max77686_clk), GFP_KERNEL);
>> + if (IS_ERR(max77686_clks[i]))
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0; i < MAX77686_CLKS_NUM; i++) {
>> + max77686_clks[i]->iodev = iodev;
>> + max77686_clks[i]->mask = 1 << i;
>> + max77686_clks[i]->hw.init = &max77686_clks_init[i];
>> +
>> + ret = max77686_clk_register(&pdev->dev, max77686_clks[i]);
>> + if (ret) {
>> + switch (i) {
>> + case MAX77686_CLK_AP:
>> + dev_err(&pdev->dev, "Fail to register CLK_AP\n");
>> + goto err_clk_ap;
>> + break;
>> + case MAX77686_CLK_CP:
>> + dev_err(&pdev->dev, "Fail to register CLK_CP\n");
>> + goto err_clk_cp;
>> + break;
>> + case MAX77686_CLK_PMIC:
>> + dev_err(&pdev->dev, "Fail to register CLK_PMIC\n");
>> + goto err_clk_pmic;
>> + }
>> + }
>> + }
>> +
>> + platform_set_drvdata(pdev, max77686_clks);
>> +
>> + goto out;
>> +
>> +err_clk_pmic:
>> + clkdev_drop(max77686_clks[MAX77686_CLK_CP]->lookup);
>> + kfree(max77686_clks[MAX77686_CLK_CP]->hw.clk);
>> +err_clk_cp:
>> + clkdev_drop(max77686_clks[MAX77686_CLK_AP]->lookup);
>> + kfree(max77686_clks[MAX77686_CLK_AP]->hw.clk);
>> +err_clk_ap:
>> +out:
>> + return ret;
>> +}
>> +
>> +static int __devexit max77686_clk_remove(struct platform_device *pdev)
>> +{
>> + struct max77686_clk **max77686_clks = platform_get_drvdata(pdev);
>> + int i;
>> +
>> + for (i = 0; i < MAX77686_CLKS_NUM; i++) {
>> + clkdev_drop(max77686_clks[i]->lookup);
>> + kfree(max77686_clks[i]->hw.clk);
>> + }
>> + return 0;
>> +}
>> +
>> +static const struct platform_device_id max77686_clk_id[] = {
>> + { "max77686-clk", 0},
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(platform, max77686_clk_id);
>> +
>> +static struct platform_driver max77686_clk_driver = {
>> + .driver = {
>> + .name = "max77686-clk",
>> + .owner = THIS_MODULE,
>> + },
>> + .probe = max77686_clk_probe,
>> + .remove = __devexit_p(max77686_clk_remove),
>> + .id_table = max77686_clk_id,
>> +};
>> +
>> +static int __init max77686_clk_init(void)
>> +{
>> + return platform_driver_register(&max77686_clk_driver);
>> +}
>> +subsys_initcall(max77686_clk_init);
>> +
>> +static void __init max77686_clk_cleanup(void)
>> +{
>> + platform_driver_unregister(&max77686_clk_driver);
>> +}
>> +module_exit(max77686_clk_cleanup);
>> +
>> +MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
>> +MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@...sung.com>");
>> +MODULE_LICENSE("GPL");
>> --
>> 1.7.4.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists