| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201209101545.q8AFjn7u021483@localhost.localdomain>
Date: Mon, 10 Sep 2012 17:45:49 +0200
From: Christophe Leroy <christophe.leroy@....fr>
To: David S Miller <davem@...emloft.net>
CC: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] lxt PHY: Support for the buggy LXT973 rev A2
This patch adds proper handling of the buggy revision A2 of LXT973 phy, adding
precautions linked to ERRATA Item 4:
Item 4: MDIO Interface and Repeated Polling
Problem: Repeated polling of odd-numbered registers via the MDIO interface
randomly returns the contents of the previous even register.
Implication: Managed applications may not obtain the correct register contents
when a particular register is monitored for device status.
Workaround: None.
Status: This erratum has been previously fixed (in rev A3)
Signed-off-by: Christophe Leroy <christophe.leroy@....fr>
diff -u linux-3.5-vanilla/drivers/net/phy/lxt.c linux-3.5/drivers/net/phy/lxt.c
--- linux-3.5-vanilla/drivers/net/phy/lxt.c 2012-07-21 22:58:29.000000000 +0200
+++ linux-3.5/drivers/net/phy/lxt.c 2012-09-07 18:08:54.000000000 +0200
@@ -7,6 +7,10 @@
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
+ * Copyright (c) 2010 CSSI
+ *
+ * Added support for buggy LXT973 rev A2
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -54,8 +58,12 @@
#define MII_LXT971_ISR 19 /* Interrupt Status Register */
/* register definitions for the 973 */
-#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
#define PCR_FIBER_SELECT 1
+#define MII_LXT973_SFR 27 /* Special Function Register */
+
+#define PHYDEV_PRIV_FIBER 1
+#define PHYDEV_PRIV_REVA2 2
MODULE_DESCRIPTION("Intel LXT PHY driver");
MODULE_AUTHOR("Andy Fleming");
@@ -99,6 +107,9 @@
return err;
}
+/* register definitions for the 973 */
+#define MII_LXT973_PCR 16 /* Port Configuration Register */
+#define PCR_FIBER_SELECT 1
static int lxt971_ack_interrupt(struct phy_device *phydev)
{
@@ -122,9 +133,141 @@
return err;
}
+/*
+ * ERRATA on LXT973
+ *
+ * Item 4: MDIO Interface and Repeated Polling
+ * Problem: Repeated polling of odd-numbered registers via the MDIO interface randomly returns the
+ * contents of the previous even register.
+ * Implication: Managed applications may not obtain the correct register contents when a particular
+ * register is monitored for device status.
+ * Workaround: None.
+ * Status: This erratum has been previously fixed (in rev A3)
+ *
+ */
+
+static int lxt973a2_update_link(struct phy_device *phydev)
+{
+ int status;
+ int control;
+ int retry = 8; /* we try 8 times */
+
+ /* Do a fake read */
+ status = phy_read(phydev, MII_BMSR);
+
+ if (status < 0)
+ return status;
+
+ control = phy_read(phydev, MII_BMCR);
+ if (control < 0)
+ return control;
+
+ do {
+ /* Read link and autonegotiation status */
+ status = phy_read(phydev, MII_BMSR);
+ } while (status>=0 && retry-- && status == control);
+
+ if (status < 0)
+ return status;
+
+ if ((status & BMSR_LSTATUS) == 0)
+ phydev->link = 0;
+ else
+ phydev->link = 1;
+
+ return 0;
+}
+
+int lxt973a2_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int lpagb = 0;
+
+ /* Update the link, but return if there was an error */
+ err = lxt973a2_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ int retry = 1;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ do {
+ lpa = phy_read(phydev, MII_LPA);
+
+ if (lpa < 0)
+ return lpa;
+
+ /* If both registers are equal, it is suspect but not impossible, hence a new try */
+ } while (lpa == adv && retry--);
+
+ lpa &= adv;
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
+ phydev->speed = SPEED_1000;
+
+ if (lpagb & LPA_1000FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else
+ if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+
+ if (phydev->duplex == DUPLEX_FULL){
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
+static int lxt973_read_status(struct phy_device *phydev)
+{
+ return (int)phydev->priv&PHYDEV_PRIV_REVA2 ? lxt973a2_read_status(phydev) : genphy_read_status(phydev);
+}
+
static int lxt973_probe(struct phy_device *phydev)
{
int val = phy_read(phydev, MII_LXT973_PCR);
+ int priv = 0;
+
+ phydev->priv = NULL;
+
+ if (val<0) return val;
if (val & PCR_FIBER_SELECT) {
/*
@@ -136,17 +279,24 @@
val &= ~BMCR_ANENABLE;
phy_write(phydev, MII_BMCR, val);
/* Remember that the port is in fiber mode. */
- phydev->priv = lxt973_probe;
- } else {
- phydev->priv = NULL;
+ priv |= PHYDEV_PRIV_FIBER;
}
+ val = phy_read(phydev, MII_PHYSID2);
+
+ if (val<0) return val;
+
+ if ((val & 0xf) == 0) { /* rev A2 */
+ dev_info(&phydev->dev, " LXT973 revision A2 has bugs\n");
+ priv |= PHYDEV_PRIV_REVA2;
+ }
+ phydev->priv = (void*)priv;
return 0;
}
static int lxt973_config_aneg(struct phy_device *phydev)
{
/* Do nothing if port is in fiber mode. */
- return phydev->priv ? 0 : genphy_config_aneg(phydev);
+ return (int)phydev->priv&PHYDEV_PRIV_FIBER ? 0 : genphy_config_aneg(phydev);
}
static struct phy_driver lxt970_driver = {
@@ -184,7 +334,10 @@
.flags = 0,
.probe = lxt973_probe,
.config_aneg = lxt973_config_aneg,
- .read_status = genphy_read_status,
+ .read_status = lxt973_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .isolate = genphy_isolate,
.driver = { .owner = THIS_MODULE,},
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists