| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20120911130700.GX18907@arwen.pp.htv.fi>
Date: Tue, 11 Sep 2012 16:07:02 +0300
From: Felipe Balbi <balbi@...com>
To: Arnd Bergmann <arnd@...db.de>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Russell King <linux@....linux.org.uk>,
Alessandro Rubini <rubini@...pv.it>,
Linus Walleij <linus.walleij@...aro.org>,
STEricsson <STEricsson_nomadik_linux@...t.st.com>,
Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>,
Herbert Xu <herbert@...dor.hengli.com.au>,
"David S. Miller" <davem@...emloft.net>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
David Woodhouse <dwmw2@...radead.org>,
Felipe Balbi <balbi@...com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andreas Westin <andreas.westin@...ricsson.com>
Subject: Re: [PATCH 12/16] ARM: nomadik: move platform_data definitions
On Tue, Sep 11, 2012 at 02:59:46PM +0200, Arnd Bergmann wrote:
> Platform data for device drivers should be defined in
> include/linux/platform_data/*.h, not in the architecture
> and platform specific directories.
>
> This moves such data out of the nomadik include directories
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> Cc: Alessandro Rubini <rubini@...pv.it>
> Cc: Linus Walleij <linus.walleij@...aro.org>
> Cc: STEricsson <STEricsson_nomadik_linux@...t.st.com>
> Cc: Srinidhi Kasagar <srinidhi.kasagar@...ricsson.com>
> Cc: Herbert Xu <herbert@...dor.apana.org.au>
> Cc: "David S. Miller" <davem@...emloft.net>
> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
> Cc: David Woodhouse <dwmw2@...radead.org>
> Cc: Felipe Balbi <balbi@...com>
> Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> Cc: Andreas Westin <andreas.westin@...ricsson.com>
for musb:
Acked-by: Felipe Balbi <balbi@...com>
> ---
> arch/arm/mach-nomadik/board-nhk8815.c | 2 +-
> arch/arm/mach-u300/core.c | 2 +-
> arch/arm/mach-ux500/board-mop500.c | 2 +-
> arch/arm/mach-ux500/cpu-db8500.c | 2 +-
> arch/arm/mach-ux500/devices-common.h | 2 +-
> arch/arm/mach-ux500/usb.c | 2 +-
> drivers/crypto/ux500/cryp/cryp_core.c | 2 +-
> drivers/crypto/ux500/hash/hash_core.c | 2 +-
> drivers/input/keyboard/nomadik-ske-keypad.c | 2 +-
> drivers/mtd/nand/nomadik_nand.c | 2 +-
> drivers/pinctrl/pinctrl-coh901.c | 2 +-
> drivers/usb/musb/ux500_dma.c | 2 +-
> .../include/mach => include/linux/platform_data}/crypto-ux500.h | 0
> .../plat/ske.h => include/linux/platform_data/keypad-nomadik-ske.h | 0
> .../mach/nand.h => include/linux/platform_data/mtd-nomadik-nand.h | 0
> .../mach/gpio-u300.h => include/linux/platform_data/pinctrl-coh901.h | 0
> .../mach/usb.h => include/linux/platform_data/usb-musb-ux500.h | 0
> 17 files changed, 12 insertions(+), 12 deletions(-)
> rename {arch/arm/mach-ux500/include/mach => include/linux/platform_data}/crypto-ux500.h (100%)
> rename arch/arm/plat-nomadik/include/plat/ske.h => include/linux/platform_data/keypad-nomadik-ske.h (100%)
> rename arch/arm/mach-nomadik/include/mach/nand.h => include/linux/platform_data/mtd-nomadik-nand.h (100%)
> rename arch/arm/mach-u300/include/mach/gpio-u300.h => include/linux/platform_data/pinctrl-coh901.h (100%)
> rename arch/arm/mach-ux500/include/mach/usb.h => include/linux/platform_data/usb-musb-ux500.h (100%)
>
> diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
> index f4535a7..381c080 100644
> --- a/arch/arm/mach-nomadik/board-nhk8815.c
> +++ b/arch/arm/mach-nomadik/board-nhk8815.c
> @@ -34,7 +34,7 @@
> #include <plat/gpio-nomadik.h>
> #include <plat/mtu.h>
>
> -#include <mach/nand.h>
> +#include <linux/platform_data/mtd-nomadik-nand.h>
> #include <mach/fsmc.h>
>
> #include "cpu-8815.h"
> diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
> index 03acf18..62adfe7 100644
> --- a/arch/arm/mach-u300/core.c
> +++ b/arch/arm/mach-u300/core.c
> @@ -43,7 +43,7 @@
> #include <mach/hardware.h>
> #include <mach/syscon.h>
> #include <mach/dma_channels.h>
> -#include <mach/gpio-u300.h>
> +#include <linux/platform_data/pinctrl-coh901.h>
>
> #include "spi.h"
> #include "i2c.h"
> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
> index 8674a89..38854d4 100644
> --- a/arch/arm/mach-ux500/board-mop500.c
> +++ b/arch/arm/mach-ux500/board-mop500.c
> @@ -48,7 +48,7 @@
> #include <mach/setup.h>
> #include <mach/devices.h>
> #include <mach/irqs.h>
> -#include <mach/crypto-ux500.h>
> +#include <linux/platform_data/crypto-ux500.h>
>
> #include "ste-dma40-db8500.h"
> #include "devices-db8500.h"
> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
> index db3c52d..1bef4c3 100644
> --- a/arch/arm/mach-ux500/cpu-db8500.c
> +++ b/arch/arm/mach-ux500/cpu-db8500.c
> @@ -24,7 +24,7 @@
> #include <mach/hardware.h>
> #include <mach/setup.h>
> #include <mach/devices.h>
> -#include <mach/usb.h>
> +#include <linux/platform_data/usb-musb-ux500.h>
> #include <mach/db8500-regs.h>
>
> #include "devices-db8500.h"
> diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
> index ecdd838..7fbf0ba 100644
> --- a/arch/arm/mach-ux500/devices-common.h
> +++ b/arch/arm/mach-ux500/devices-common.h
> @@ -13,7 +13,7 @@
> #include <linux/sys_soc.h>
> #include <linux/amba/bus.h>
> #include <linux/platform_data/i2c-nomadik.h>
> -#include <mach/crypto-ux500.h>
> +#include <linux/platform_data/crypto-ux500.h>
>
> struct spi_master_cntlr;
>
> diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
> index a74af38..145482e 100644
> --- a/arch/arm/mach-ux500/usb.c
> +++ b/arch/arm/mach-ux500/usb.c
> @@ -10,7 +10,7 @@
>
> #include <plat/ste_dma40.h>
> #include <mach/hardware.h>
> -#include <mach/usb.h>
> +#include <linux/platform_data/usb-musb-ux500.h>
>
> #define MUSB_DMA40_RX_CH { \
> .mode = STEDMA40_MODE_LOGICAL, \
> diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
> index 1c307e1..ef17e38 100644
> --- a/drivers/crypto/ux500/cryp/cryp_core.c
> +++ b/drivers/crypto/ux500/cryp/cryp_core.c
> @@ -32,7 +32,7 @@
>
> #include <plat/ste_dma40.h>
>
> -#include <mach/crypto-ux500.h>
> +#include <linux/platform_data/crypto-ux500.h>
> #include <mach/hardware.h>
>
> #include "cryp_p.h"
> diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
> index 08d5032..0876507 100644
> --- a/drivers/crypto/ux500/hash/hash_core.c
> +++ b/drivers/crypto/ux500/hash/hash_core.c
> @@ -31,7 +31,7 @@
> #include <crypto/scatterwalk.h>
> #include <crypto/algapi.h>
>
> -#include <mach/crypto-ux500.h>
> +#include <linux/platform_data/crypto-ux500.h>
> #include <mach/hardware.h>
>
> #include "hash_alg.h"
> diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
> index a880e74..49f5fa6 100644
> --- a/drivers/input/keyboard/nomadik-ske-keypad.c
> +++ b/drivers/input/keyboard/nomadik-ske-keypad.c
> @@ -20,7 +20,7 @@
> #include <linux/clk.h>
> #include <linux/module.h>
>
> -#include <plat/ske.h>
> +#include <linux/platform_data/keypad-nomadik-ske.h>
>
> /* SKE_CR bits */
> #define SKE_KPMLT (0x1 << 6)
> diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
> index a86aa81..9ee0c4e 100644
> --- a/drivers/mtd/nand/nomadik_nand.c
> +++ b/drivers/mtd/nand/nomadik_nand.c
> @@ -31,7 +31,7 @@
> #include <linux/mtd/partitions.h>
> #include <linux/io.h>
> #include <linux/slab.h>
> -#include <mach/nand.h>
> +#include <linux/platform_data/mtd-nomadik-nand.h>
> #include <mach/fsmc.h>
>
> #include <mtd/mtd-abi.h>
> diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c
> index cc0f00d..b7f41e9 100644
> --- a/drivers/pinctrl/pinctrl-coh901.c
> +++ b/drivers/pinctrl/pinctrl-coh901.c
> @@ -24,7 +24,7 @@
> #include <linux/slab.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/pinctrl/pinconf-generic.h>
> -#include <mach/gpio-u300.h>
> +#include <linux/platform_data/pinctrl-coh901.h>
> #include "pinctrl-coh901.h"
>
> /*
> diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
> index d05c7fb..f82246d 100644
> --- a/drivers/usb/musb/ux500_dma.c
> +++ b/drivers/usb/musb/ux500_dma.c
> @@ -30,7 +30,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/dmaengine.h>
> #include <linux/pfn.h>
> -#include <mach/usb.h>
> +#include <linux/platform_data/usb-musb-ux500.h>
> #include "musb_core.h"
>
> struct ux500_dma_channel {
> diff --git a/arch/arm/mach-ux500/include/mach/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h
> similarity index 100%
> rename from arch/arm/mach-ux500/include/mach/crypto-ux500.h
> rename to include/linux/platform_data/crypto-ux500.h
> diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/include/linux/platform_data/keypad-nomadik-ske.h
> similarity index 100%
> rename from arch/arm/plat-nomadik/include/plat/ske.h
> rename to include/linux/platform_data/keypad-nomadik-ske.h
> diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/include/linux/platform_data/mtd-nomadik-nand.h
> similarity index 100%
> rename from arch/arm/mach-nomadik/include/mach/nand.h
> rename to include/linux/platform_data/mtd-nomadik-nand.h
> diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/include/linux/platform_data/pinctrl-coh901.h
> similarity index 100%
> rename from arch/arm/mach-u300/include/mach/gpio-u300.h
> rename to include/linux/platform_data/pinctrl-coh901.h
> diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/include/linux/platform_data/usb-musb-ux500.h
> similarity index 100%
> rename from arch/arm/mach-ux500/include/mach/usb.h
> rename to include/linux/platform_data/usb-musb-ux500.h
> --
> 1.7.10
>
--
balbi
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists