| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1347639843-32119-4-git-send-email-dciminaghi@mail.gnudd.com>
Date: Fri, 14 Sep 2012 18:23:58 +0200
From: Davide Ciminaghi <dciminaghi@...l.gnudd.com>
To: linux@....linux.org.uk, tglx@...utronix.de, mingo@...hat.com,
hpa@...or.com, djbw@...com, vinod.koul@...el.com,
grant.likely@...retlab.ca, linus.walleij@...aro.org,
rubini@...dd.com, wim@...ana.be, cjb@...top.org,
davidb@...eaurora.org, nico@...xnic.net,
gregkh@...uxfoundation.org, ben-linux@...ff.org,
viresh.linux@...il.com, rajeev-dlh.kumar@...com
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
giancarlo.asnaghi@...com
Subject: [PATCH 3/8] pl080.h: moved from arm/include/asm/hardware to include/linux/amba/
From: Alessandro Rubini <rubini@...dd.com>
The header is used by drivers/dma/amba-pl08x.c, which can be compiled
under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche
moves it where it can be accessed by other architectures, and fixes
all users.
Signed-off-by: Alessandro Rubini <rubini@...dd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@...com>
---
arch/arm/include/asm/hardware/pl080.h | 146 ---------------------------------
arch/arm/mach-s3c64xx/dma.c | 2 +-
arch/arm/mach-spear3xx/spear3xx.c | 2 +-
arch/arm/mach-spear6xx/spear6xx.c | 2 +-
drivers/dma/amba-pl08x.c | 2 +-
include/linux/amba/pl080.h | 146 +++++++++++++++++++++++++++++++++
6 files changed, 150 insertions(+), 150 deletions(-)
delete mode 100644 arch/arm/include/asm/hardware/pl080.h
create mode 100644 include/linux/amba/pl080.h
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
deleted file mode 100644
index 4eea210..0000000
--- a/arch/arm/include/asm/hardware/pl080.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/include/asm/hardware/pl080.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@...tec.co.uk>
- *
- * ARM PrimeCell PL080 DMA controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Note, there are some Samsung updates to this controller block which
- * make it not entierly compatible with the PL080 specification from
- * ARM. When in doubt, check the Samsung documentation first.
- *
- * The Samsung defines are PL080S, and add an extra control register,
- * the ability to move more than 2^11 counts of data and some extra
- * OneNAND features.
-*/
-
-#ifndef ASM_PL080_H
-#define ASM_PL080_H
-
-#define PL080_INT_STATUS (0x00)
-#define PL080_TC_STATUS (0x04)
-#define PL080_TC_CLEAR (0x08)
-#define PL080_ERR_STATUS (0x0C)
-#define PL080_ERR_CLEAR (0x10)
-#define PL080_RAW_TC_STATUS (0x14)
-#define PL080_RAW_ERR_STATUS (0x18)
-#define PL080_EN_CHAN (0x1c)
-#define PL080_SOFT_BREQ (0x20)
-#define PL080_SOFT_SREQ (0x24)
-#define PL080_SOFT_LBREQ (0x28)
-#define PL080_SOFT_LSREQ (0x2C)
-
-#define PL080_CONFIG (0x30)
-#define PL080_CONFIG_M2_BE (1 << 2)
-#define PL080_CONFIG_M1_BE (1 << 1)
-#define PL080_CONFIG_ENABLE (1 << 0)
-
-#define PL080_SYNC (0x34)
-
-/* Per channel configuration registers */
-
-#define PL080_Cx_STRIDE (0x20)
-#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
-
-#define PL080_CH_SRC_ADDR (0x00)
-#define PL080_CH_DST_ADDR (0x04)
-#define PL080_CH_LLI (0x08)
-#define PL080_CH_CONTROL (0x0C)
-#define PL080_CH_CONFIG (0x10)
-#define PL080S_CH_CONTROL2 (0x10)
-#define PL080S_CH_CONFIG (0x14)
-
-#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
-#define PL080_LLI_ADDR_SHIFT (2)
-#define PL080_LLI_LM_AHB2 (1 << 0)
-
-#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
-#define PL080_CONTROL_PROT_MASK (0x7 << 28)
-#define PL080_CONTROL_PROT_SHIFT (28)
-#define PL080_CONTROL_PROT_CACHE (1 << 30)
-#define PL080_CONTROL_PROT_BUFF (1 << 29)
-#define PL080_CONTROL_PROT_SYS (1 << 28)
-#define PL080_CONTROL_DST_INCR (1 << 27)
-#define PL080_CONTROL_SRC_INCR (1 << 26)
-#define PL080_CONTROL_DST_AHB2 (1 << 25)
-#define PL080_CONTROL_SRC_AHB2 (1 << 24)
-#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
-#define PL080_CONTROL_DWIDTH_SHIFT (21)
-#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
-#define PL080_CONTROL_SWIDTH_SHIFT (18)
-#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
-#define PL080_CONTROL_DB_SIZE_SHIFT (15)
-#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
-#define PL080_CONTROL_SB_SIZE_SHIFT (12)
-#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
-#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
-
-#define PL080_BSIZE_1 (0x0)
-#define PL080_BSIZE_4 (0x1)
-#define PL080_BSIZE_8 (0x2)
-#define PL080_BSIZE_16 (0x3)
-#define PL080_BSIZE_32 (0x4)
-#define PL080_BSIZE_64 (0x5)
-#define PL080_BSIZE_128 (0x6)
-#define PL080_BSIZE_256 (0x7)
-
-#define PL080_WIDTH_8BIT (0x0)
-#define PL080_WIDTH_16BIT (0x1)
-#define PL080_WIDTH_32BIT (0x2)
-
-#define PL080N_CONFIG_ITPROT (1 << 20)
-#define PL080N_CONFIG_SECPROT (1 << 19)
-#define PL080_CONFIG_HALT (1 << 18)
-#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
-#define PL080_CONFIG_LOCK (1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
-#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
-#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
-#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
-#define PL080_CONFIG_DST_SEL_SHIFT (6)
-#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
-#define PL080_CONFIG_SRC_SEL_SHIFT (1)
-#define PL080_CONFIG_ENABLE (1 << 0)
-
-#define PL080_FLOW_MEM2MEM (0x0)
-#define PL080_FLOW_MEM2PER (0x1)
-#define PL080_FLOW_PER2MEM (0x2)
-#define PL080_FLOW_SRC2DST (0x3)
-#define PL080_FLOW_SRC2DST_DST (0x4)
-#define PL080_FLOW_MEM2PER_PER (0x5)
-#define PL080_FLOW_PER2MEM_PER (0x6)
-#define PL080_FLOW_SRC2DST_SRC (0x7)
-
-/* DMA linked list chain structure */
-
-struct pl080_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
-};
-
-struct pl080s_lli {
- u32 src_addr;
- u32 dst_addr;
- u32 next_lli;
- u32 control0;
- u32 control1;
-};
-
-#endif /* ASM_PL080_H */
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index f2a7a17..a77f521 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -23,6 +23,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/amba/pl080.h>
#include <mach/dma.h>
#include <mach/map.h>
@@ -30,7 +31,6 @@
#include <mach/regs-sys.h>
-#include <asm/hardware/pl080.h>
/* dma channel state information */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 98144ba..ba61129 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -15,9 +15,9 @@
#include <linux/amba/pl022.h>
#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
#include <linux/of_irq.h>
#include <linux/io.h>
-#include <asm/hardware/pl080.h>
#include <asm/hardware/vic.h>
#include <plat/pl080.h>
#include <mach/generic.h>
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5a5a52d..8ce65a2 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -20,7 +20,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <asm/hardware/pl080.h>
+#include <linux/amba/pl080.h>
#include <asm/hardware/vic.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index d1cc579..b453c2f 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -83,7 +83,7 @@
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <asm/hardware/pl080.h>
+#include <linux/amba/pl080.h>
#include "dmaengine.h"
#include "virt-dma.h"
diff --git a/include/linux/amba/pl080.h b/include/linux/amba/pl080.h
new file mode 100644
index 0000000..3e7b62f
--- /dev/null
+++ b/include/linux/amba/pl080.h
@@ -0,0 +1,146 @@
+/* include/linux/amba/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@...tec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra control register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#ifndef ASM_PL080_H
+#define ASM_PL080_H
+
+#define PL080_INT_STATUS (0x00)
+#define PL080_TC_STATUS (0x04)
+#define PL080_TC_CLEAR (0x08)
+#define PL080_ERR_STATUS (0x0C)
+#define PL080_ERR_CLEAR (0x10)
+#define PL080_RAW_TC_STATUS (0x14)
+#define PL080_RAW_ERR_STATUS (0x18)
+#define PL080_EN_CHAN (0x1c)
+#define PL080_SOFT_BREQ (0x20)
+#define PL080_SOFT_SREQ (0x24)
+#define PL080_SOFT_LBREQ (0x28)
+#define PL080_SOFT_LSREQ (0x2C)
+
+#define PL080_CONFIG (0x30)
+#define PL080_CONFIG_M2_BE (1 << 2)
+#define PL080_CONFIG_M1_BE (1 << 1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_SYNC (0x34)
+
+/* Per channel configuration registers */
+
+#define PL080_Cx_STRIDE (0x20)
+#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR (0x00)
+#define PL080_CH_DST_ADDR (0x04)
+#define PL080_CH_LLI (0x08)
+#define PL080_CH_CONTROL (0x0C)
+#define PL080_CH_CONFIG (0x10)
+#define PL080S_CH_CONTROL2 (0x10)
+#define PL080S_CH_CONFIG (0x14)
+
+#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT (2)
+#define PL080_LLI_LM_AHB2 (1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_PROT_MASK (0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_CACHE (1 << 30)
+#define PL080_CONTROL_PROT_BUFF (1 << 29)
+#define PL080_CONTROL_PROT_SYS (1 << 28)
+#define PL080_CONTROL_DST_INCR (1 << 27)
+#define PL080_CONTROL_SRC_INCR (1 << 26)
+#define PL080_CONTROL_DST_AHB2 (1 << 25)
+#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT (21)
+#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT (18)
+#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT (15)
+#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT (12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
+
+#define PL080_BSIZE_1 (0x0)
+#define PL080_BSIZE_4 (0x1)
+#define PL080_BSIZE_8 (0x2)
+#define PL080_BSIZE_16 (0x3)
+#define PL080_BSIZE_32 (0x4)
+#define PL080_BSIZE_64 (0x5)
+#define PL080_BSIZE_128 (0x6)
+#define PL080_BSIZE_256 (0x7)
+
+#define PL080_WIDTH_8BIT (0x0)
+#define PL080_WIDTH_16BIT (0x1)
+#define PL080_WIDTH_32BIT (0x2)
+
+#define PL080N_CONFIG_ITPROT (1 << 20)
+#define PL080N_CONFIG_SECPROT (1 << 19)
+#define PL080_CONFIG_HALT (1 << 18)
+#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
+#define PL080_CONFIG_LOCK (1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
+#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT (6)
+#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT (1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_FLOW_MEM2MEM (0x0)
+#define PL080_FLOW_MEM2PER (0x1)
+#define PL080_FLOW_PER2MEM (0x2)
+#define PL080_FLOW_SRC2DST (0x3)
+#define PL080_FLOW_SRC2DST_DST (0x4)
+#define PL080_FLOW_MEM2PER_PER (0x5)
+#define PL080_FLOW_PER2MEM_PER (0x6)
+#define PL080_FLOW_SRC2DST_SRC (0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+};
+
+struct pl080s_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+ u32 control1;
+};
+
+#endif /* ASM_PL080_H */
--
1.7.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists