linux-kernel - Re: [PATCH v2 0/2] Add pinctrl support to omap2-mcspi

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20120917172754.GR27758@beef>
Date:	Mon, 17 Sep 2012 13:27:54 -0400
From:	Matt Porter <mporter@...com>
To:	Linux OMAP List <linux-omap@...r.kernel.org>,
	Linux SPI Devel List 
	<spi-devel-general@...ts.sourceforge.net>,
	Grant Likely <grant.likely@...retlab.ca>,
	Tony Lindgren <tony@...mide.com>
Cc:	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	AnilKumar <anilkumar@...com>
Subject: Re: [PATCH v2 0/2] Add pinctrl support to omap2-mcspi

On Mon, Sep 17, 2012 at 01:22:16PM -0400, Matt Porter wrote:
> Changes since v1:
> 	- warns that pins are not configured by the driver rather than
> 	  exiting 
> 	- dummy states are only enabled for OMAP platforms where DT is
> 	  not populated
> 
> This series enables pinctrl support for McSPI. Platforms that boot only
> from DT and rely on pinctrl to set pinmuxes appropriately require this
> for omap2-mcspi operation.
> 
> It has been tested on AM335x BeagleBone with an Adafruit SPI LCD attached
> and regression tested on Beagleboard xM booting in the !DT case, using
> board-omap3evm.c. 
> 
> The series applies on top of Tony's dt-devel branch.

*sigh*, that's devel-dt of course.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/