| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1348404995-14372-11-git-send-email-zwu.kernel@gmail.com> Date: Sun, 23 Sep 2012 20:56:35 +0800 From: zwu.kernel@...il.com To: linux-fsdevel@...r.kernel.org Cc: linux-kernel@...r.kernel.org, linux-btrfs@...r.kernel.org, linux-ext4@...r.kernel.org, linuxram@...ux.vnet.ibm.com, viro@...iv.linux.org.uk, cmm@...ibm.com, tytso@....edu, marco.stornelli@...il.com, david@...morbit.com, stroetmann@...olinux.com, diegocg@...il.com, chris@...muel.org, Zhi Yong Wu <wuzhy@...ux.vnet.ibm.com> Subject: [RFC v2 10/10] vfs: add documentation From: Zhi Yong Wu <wuzhy@...ux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@...ux.vnet.ibm.com> --- Documentation/filesystems/hot_tracking.txt | 106 ++++++++++++++++++++++++++++ 1 files changed, 106 insertions(+), 0 deletions(-) create mode 100644 Documentation/filesystems/hot_tracking.txt diff --git a/Documentation/filesystems/hot_tracking.txt b/Documentation/filesystems/hot_tracking.txt new file mode 100644 index 0000000..340df45 --- /dev/null +++ b/Documentation/filesystems/hot_tracking.txt @@ -0,0 +1,106 @@ +Hot Data Tracking + +Introduction +------------------------------------------------------------------------------- + + The feature adds experimental support for tracking data temperature +information in VFS layer. Essentially, this means maintaining some key +stats(like number of reads/writes, last read/write time, frequency of +reads/writes), then distilling those numbers down to a single +"temperature" value that reflects what data is "hot," and using that +temperature to move data to SSDs. + + The long-term goal of the feature is to allow some FSs, +e.g. Btrfs to intelligently utilize SSDs in a heterogenous volume. +Incidentally, this project has been motivated by +the Project Ideas page on the Btrfs wiki. + + Of course, users are warned not to run this code outside of development +environments. These patches are EXPERIMENTAL, and as such they might eat +your data and/or memory. That said, the code should be relatively safe +when the hottrack mount option are disabled. + +Motivation +------------------------------------------------------------------------------- + + The overall goal of enabling hot data relocation to SSD has been +motivated by the Project Ideas page on the Btrfs wiki at +<https://btrfs.wiki.kernel.org/index.php/Project_ideas>. +It will divide into two steps. VFS provide hot data tracking function +while specific FS will provide hot data relocation function. +So as the first step of this goal, it is hoped that the patchset +for hot data tracking will eventually mature into VFS. + + This is essentially the traditional cache argument: SSD is fast and +expensive; HDD is cheap but slow. ZFS, for example, can already take +advantage of SSD caching. Btrfs should also be able to take advantage of +hybrid storage without many broad, sweeping changes to existing code. + +Main Parts Description +------------------------------------------------------------------------------- + +These include the following parts: + * Hooks in existing vfs functions to track data access frequency + * New rbtrees for tracking access frequency of inodes and sub-file +ranges (hot_rb.c) + The relationship between super_block and rbtree is as below: +super_block->s_hotinfo.hot_inode_tree + In include/linux/fs.h, one struct hot_info s_hotinfo is added to +super_block struct. Each FS instance can find hot tracking info +s_hotinfo via its super_block. In this hot_info, it store a lot of hot +tracking info such as hot_inode_tree, inode and range hash list, etc. + * A hash list for indexing data by its temperature (hot_hash.c) + * A debugfs interface for dumping data from the rbtrees (hot_debugfs.c) + * A background kthread for updating inode heat info + * Mount options for enabling temperature tracking(-o hottrack, +default mean disabled) (hot_track.c) + * An ioctl to retrieve the frequency information collected for a certain +file + * Ioctls to enable/disable frequency tracking per inode. + +Git Development Tree +------------------------------------------------------------------------------- + + The feature is still on development and review, so if you're interested, +you can pull from the git repository at the following location: + https://github.com/wuzhy/kernel.git hot_tracking + git://github.com/wuzhy/kernel.git hot_tracking + +Usage Example +------------------------------------------------------------------------------- +To use hot tracking, you should mount like this: + +$ mount -o hottrack /dev/sdb /mnt +[ 1505.894078] device label test devid 1 transid 29 /dev/sdb +[ 1505.952977] btrfs: disk space caching is enabled +[ 1506.069678] vfs: turning on hot data tracking + +Mount debugfs at first: + +$ mount -t debugfs none /sys/kernel/debug +$ ls -l /sys/kernel/debug/vfs_hotdata/ +total 0 +drwxr-xr-x 2 root root 0 Aug 8 04:40 sdb +$ ls -l /sys/kernel/debug/vfs_hotdata/sdb +total 0 +-rw-r--r-- 1 root root 0 Aug 8 04:40 inode_data +-rw-r--r-- 1 root root 0 Aug 8 04:40 range_data + +View information about hot tracking from debugfs: + +$ echo "hot tracking test" > /mnt/file +$ cat /sys/kernel/debug/hot_track/sdb/inode_data +inode #279, reads 0, writes 1, avg read time 18446744073709551615, +avg write time 5251566408153596, temp 109 +$ cat /sys/kernel/debug/hot_track/sdb/range_data +inode #279, range start 0 (range len 1048576) reads 0, writes 1, +avg read time 18446744073709551615, avg write time 1128690176623144209, temp 64 + +$ echo "hot data tracking test" >> /mnt/file +$ cat /sys/kernel/debug/hot_track/sdb/inode_data +inode #279, reads 0, writes 2, avg read time 18446744073709551615, +avg write time 4923343766042451, temp 109 +$ cat /sys/kernel/debug/hot_track/sdb/range_data +inode #279, range start 0 (range len 1048576) reads 0, writes 2, +avg read time 18446744073709551615, avg write time 1058147040842596150, temp 64 + -- 1.7.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists