| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+V-a8t5qYBAY4xjFQOM5UcdrLRfuta-mbeO0qbTZ-EFR8=LwA@mail.gmail.com>
Date: Mon, 24 Sep 2012 18:51:44 +0530
From: Prabhakar Lad <prabhakar.csengg@...il.com>
To: Hans Verkuil <hverkuil@...all.nl>
Cc: LMML <linux-media@...r.kernel.org>,
DLOS <davinci-linux-open-source@...ux.davincidsp.com>,
LAK <linux-arm-kernel@...ts.infradead.org>,
Sekhar Nori <nsekhar@...com>,
Mauro Carvalho Chehab <mchehab@...radead.org>,
VGER <linux-kernel@...r.kernel.org>,
"Lad, Prabhakar" <prabhakar.lad@...com>,
Manjunath Hadli <manjunath.hadli@...com>,
Hans Verkuil <hans.verkuil@...co.com>
Subject: Re: [PATCH v2] media: davinci: vpif: display: separate out subdev
from output
Hi Hans,
On Mon, Sep 24, 2012 at 5:20 PM, Hans Verkuil <hverkuil@...all.nl> wrote:
> On Mon September 24 2012 12:59:11 Hans Verkuil wrote:
>> On Mon September 24 2012 12:44:11 Prabhakar wrote:
>> > From: Lad, Prabhakar <prabhakar.lad@...com>
>> >
>> > vpif_display relied on a 1-1 mapping of output and subdev. This is not
>> > necessarily the case. Separate the two. So there is a list of subdevs
>> > and a list of outputs. Each output refers to a subdev and has routing
>> > information. An output does not have to have a subdev.
>> >
>> > The initial output for each channel is set to the fist output.
>> >
>> > Currently missing is support for associating multiple subdevs with
>> > an output.
>> >
>> > Signed-off-by: Lad, Prabhakar <prabhakar.lad@...com>
>> > Signed-off-by: Manjunath Hadli <manjunath.hadli@...com>
>> > Cc: Hans Verkuil <hans.verkuil@...co.com>
>> > Cc: Sekhar Nori <nsekhar@...com>
>>
>> Acked-by: Hans Verkuil <hans.verkuil@...co.com>
>
> I'm retracting this Ack. I did see something that wasn't right but I thought
> it was harmless, but after thinking some more I believe it should be fixed.
> Luckily, it's easy to fix. See below. Since we need a new version anyway I
> also added a comment to a few minor issues that can be fixed at the same time.
>
>>
>> Regards,
>>
>> Hans
>>
>> > ---
>> > This patch is dependent on the patch series from Hans
>> > (http://www.mail-archive.com/linux-media@vger.kernel.org/msg52270.html)
>> >
>> > Changes for V2:
>> > 1: Changed v4l2_device_call_until_err() call to v4l2_subdev_call() for
>> > s_routing, since this call is for specific subdev, pointed out by Hans.
>> >
>> > arch/arm/mach-davinci/board-da850-evm.c | 29 +++++-
>> > arch/arm/mach-davinci/board-dm646x-evm.c | 39 ++++++-
>> > drivers/media/platform/davinci/vpif_display.c | 136 ++++++++++++++++++++-----
>> > include/media/davinci/vpif_types.h | 20 +++-
>> > 4 files changed, 183 insertions(+), 41 deletions(-)
>> >
>> > diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
>> > index 3081ea4..23a7012 100644
>> > --- a/arch/arm/mach-davinci/board-da850-evm.c
>> > +++ b/arch/arm/mach-davinci/board-da850-evm.c
>> > @@ -46,6 +46,7 @@
>> > #include <mach/spi.h>
>> >
>> > #include <media/tvp514x.h>
>> > +#include <media/adv7343.h>
>> >
>> > #define DA850_EVM_PHY_ID "davinci_mdio-0:00"
>> > #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
>> > @@ -1257,16 +1258,34 @@ static struct vpif_subdev_info da850_vpif_subdev[] = {
>> > },
>> > };
>> >
>> > -static const char const *vpif_output[] = {
>> > - "Composite",
>> > - "S-Video",
>> > +static const struct vpif_output da850_ch0_outputs[] = {
>> > + {
>> > + .output = {
>> > + .index = 0,
>> > + .name = "Composite",
>> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > + },
>> > + .subdev_name = "adv7343",
>> > + .output_route = ADV7343_COMPOSITE_ID,
>> > + },
>> > + {
>> > + .output = {
>> > + .index = 1,
>> > + .name = "S-Video",
>> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > + },
>> > + .subdev_name = "adv7343",
>> > + .output_route = ADV7343_SVIDEO_ID,
>> > + },
>> > };
>> >
>> > static struct vpif_display_config da850_vpif_display_config = {
>> > .subdevinfo = da850_vpif_subdev,
>> > .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
>> > - .output = vpif_output,
>> > - .output_count = ARRAY_SIZE(vpif_output),
>> > + .chan_config[0] = {
>> > + .outputs = da850_ch0_outputs,
>> > + .output_count = ARRAY_SIZE(da850_ch0_outputs),
>> > + },
>> > .card_name = "DA850/OMAP-L138 Video Display",
>> > };
>> >
>> > diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
>> > index ad249c7..c206768 100644
>> > --- a/arch/arm/mach-davinci/board-dm646x-evm.c
>> > +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
>> > @@ -26,6 +26,7 @@
>> > #include <linux/i2c/pcf857x.h>
>> >
>> > #include <media/tvp514x.h>
>> > +#include <media/adv7343.h>
>> >
>> > #include <linux/mtd/mtd.h>
>> > #include <linux/mtd/nand.h>
>> > @@ -496,18 +497,44 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = {
>> > },
>> > };
>> >
>> > -static const char *output[] = {
>> > - "Composite",
>> > - "Component",
>> > - "S-Video",
>> > +static const struct vpif_output dm6467_ch0_outputs[] = {
>> > + {
>> > + .output = {
>> > + .index = 0,
>> > + .name = "Composite",
>> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > + },
>> > + .subdev_name = "adv7343",
>> > + .output_route = ADV7343_COMPOSITE_ID,
>> > + },
>> > + {
>> > + .output = {
>> > + .index = 1,
>> > + .name = "Component",
>> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > + },
>> > + .subdev_name = "adv7343",
>> > + .output_route = ADV7343_COMPONENT_ID,
>> > + },
>> > + {
>> > + .output = {
>> > + .index = 2,
>> > + .name = "S-Video",
>> > + .type = V4L2_OUTPUT_TYPE_ANALOG,
>> > + },
>> > + .subdev_name = "adv7343",
>> > + .output_route = ADV7343_SVIDEO_ID,
>> > + },
>> > };
>> >
>> > static struct vpif_display_config dm646x_vpif_display_config = {
>> > .set_clock = set_vpif_clock,
>> > .subdevinfo = dm646x_vpif_subdev,
>> > .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
>> > - .output = output,
>> > - .output_count = ARRAY_SIZE(output),
>> > + .chan_config[0] = {
>> > + .outputs = dm6467_ch0_outputs,
>> > + .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
>> > + },
>> > .card_name = "DM646x EVM",
>> > };
>> >
>> > diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
>> > index 8d1ce09..f68780f 100644
>> > --- a/drivers/media/platform/davinci/vpif_display.c
>> > +++ b/drivers/media/platform/davinci/vpif_display.c
>> > @@ -308,7 +308,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> > channel2_intr_assert();
>> > channel2_intr_enable(1);
>> > enable_channel2(1);
>> > - if (vpif_config_data->ch2_clip_en)
>> > + if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> > channel2_clipping_enable(1);
>> > }
>> >
>> > @@ -317,7 +317,7 @@ static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
>> > channel3_intr_assert();
>> > channel3_intr_enable(1);
>> > enable_channel3(1);
>> > - if (vpif_config_data->ch3_clip_en)
>> > + if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> > channel3_clipping_enable(1);
>> > }
>> >
>> > @@ -1174,14 +1174,16 @@ static int vpif_streamoff(struct file *file, void *priv,
>> > if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>> > /* disable channel */
>> > if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
>> > - if (vpif_config_data->ch2_clip_en)
>> > + if (vpif_config_data->
>> > + chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
>> > channel2_clipping_enable(0);
>> > enable_channel2(0);
>> > channel2_intr_enable(0);
>> > }
>> > if ((VPIF_CHANNEL3_VIDEO == ch->channel_id) ||
>> > (2 == common->started)) {
>> > - if (vpif_config_data->ch3_clip_en)
>> > + if (vpif_config_data->
>> > + chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
>> > channel3_clipping_enable(0);
>> > enable_channel3(0);
>> > channel3_intr_enable(0);
>> > @@ -1214,41 +1216,118 @@ static int vpif_enum_output(struct file *file, void *fh,
>> > {
>> >
>> > struct vpif_display_config *config = vpif_dev->platform_data;
>> > + struct vpif_display_chan_config *chan_cfg;
>> > + struct vpif_fh *vpif_handler = fh;
>> > + struct channel_obj *ch = vpif_handler->channel;
>> >
>> > - if (output->index >= config->output_count) {
>> > + chan_cfg = &config->chan_config[ch->channel_id];
>> > + if (output->index >= chan_cfg->output_count) {
>> > vpif_dbg(1, debug, "Invalid output index\n");
>> > return -EINVAL;
>> > }
>> >
>> > - strcpy(output->name, config->output[output->index]);
>> > - output->type = V4L2_OUTPUT_TYPE_ANALOG;
>> > + memcpy(output, &chan_cfg->outputs[output->index].output,
>> > + sizeof(*output));
>
> *output = chan_cfg->outputs[output->index].output;
>
>> > output->std = VPIF_V4L2_STD;
>
Should I move 'VPIF_V4L2_STD' this macro to vpif_types.h ?
> This should be part of chan_cfg->outputs[output->index].output and not be
> overridden. If the output is a HDTV output, then std should be 0, otherwise
> it should be whatever the std is that is supported by the output.
>
> Really no different to what we do in vpif_capture.
>
Ok
>> >
>> > return 0;
>> > }
>> >
>> > +/**
>> > + * vpif_output_to_subdev() - Maps output to sub device
>> > + * @vpif_cfg - global config ptr
>> > + * @chan_cfg - channel config ptr
>> > + * @index - Given output index from application
>> > + *
>> > + * lookup the sub device information for a given output index.
>> > + * we report all the output to application. output table also
>> > + * has sub device name for the each output
>> > + */
>> > +static int
>> > +vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
>> > + struct vpif_display_chan_config *chan_cfg, int index)
>> > +{
>> > + struct vpif_subdev_info *subdev_info;
>> > + const char *subdev_name;
>> > + int i;
>> > +
>> > + vpif_dbg(2, debug, "vpif_output_to_subdev\n");
>> > +
>> > + if (chan_cfg->outputs == NULL)
>> > + return -1;
>> > +
>> > + subdev_name = chan_cfg->outputs[index].subdev_name;
>> > + if (subdev_name == NULL)
>> > + return -1;
>> > +
>> > + /* loop through the sub device list to get the sub device info */
>> > + for (i = 0; i < vpif_cfg->subdev_count; i++) {
>> > + subdev_info = &vpif_cfg->subdevinfo[i];
>> > + if (!strcmp(subdev_info->name, subdev_name))
>> > + return i;
>> > + }
>> > + return -1;
>> > +}
>> > +
>> > +/**
>> > + * vpif_set_output() - Select an output
>> > + * @vpif_cfg - global config ptr
>> > + * @ch - channel
>> > + * @index - Given output index from application
>> > + *
>> > + * Select the given output.
>> > + */
>> > +static int vpif_set_output(struct vpif_display_config *vpif_cfg,
>> > + struct channel_obj *ch, int index)
>> > +{
>> > + struct vpif_display_chan_config *chan_cfg =
>> > + &vpif_cfg->chan_config[ch->channel_id];
>> > + struct vpif_subdev_info *subdev_info = NULL;
>> > + struct v4l2_subdev *sd = NULL;
>> > + u32 input = 0, output = 0;
>> > + int sd_index;
>> > + int ret;
>> > +
>> > + sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
>> > + if (sd_index >= 0) {
>> > + sd = vpif_obj.sd[sd_index];
>> > + subdev_info = &vpif_cfg->subdevinfo[sd_index];
>> > + }
>> > +
>> > + if (sd) {
>> > + input = chan_cfg->outputs[index].input_route;
>> > + output = chan_cfg->outputs[index].output_route;
>> > + ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
>> > + if (ret < 0) {
>
> Replace with:
>
> if (ret < 0 && ret != -ENOIOCTLCMD) {
>
> It's OK if the subdev doesn't support this s_routing operation.
>
Ok
>> > + vpif_err("Failed to set output\n");
>> > + return ret;
>> > + }
>> > +
>> > + }
>> > + ch->output_idx = index;
>> > + ch->sd = sd;
>
> Just like in the capture case you should update tvnorms:
>
> ch->video_dev->tvnorms = chan_cfg->inputs[index].output.std;
>
> Make sure tvnorms is no longer set in vpif_video_template.
> Ditto for current_norm. Since vpif_display.c supports g_std the current_norm
> field shouldn't be used anymore.
>
> The capture case also updates vpifparams.iface:
>
> ch->vpifparams.iface = chan_cfg->vpif_if;
>
> Isn't that needed for output as well?
>
The iface is never used in display, so there isnt any necessity to assign it.
Regards,
--Prabhakar Lad
>> > + return 0;
>> > +}
>> > +
>> > static int vpif_s_output(struct file *file, void *priv, unsigned int i)
>> > {
>> > + struct vpif_display_config *config = vpif_dev->platform_data;
>> > + struct vpif_display_chan_config *chan_cfg;
>> > struct vpif_fh *fh = priv;
>> > struct channel_obj *ch = fh->channel;
>> > struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
>> > - int ret = 0;
>> > +
>> > + chan_cfg = &config->chan_config[ch->channel_id];
>> > +
>> > + if (i >= chan_cfg->output_count)
>> > + return -EINVAL;
>> >
>> > if (common->started) {
>> > vpif_err("Streaming in progress\n");
>> > return -EBUSY;
>> > }
>> >
>> > - ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
>> > - s_routing, 0, i, 0);
>> > -
>> > - if (ret < 0)
>> > - vpif_err("Failed to set output standard\n");
>> > -
>> > - ch->output_idx = i;
>> > - if (vpif_obj.sd[i])
>> > - ch->sd = vpif_obj.sd[i];
>> > - return ret;
>> > + return vpif_set_output(config, ch, i);
>> > }
>> >
>> > static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
>> > @@ -1291,9 +1370,12 @@ vpif_enum_dv_timings(struct file *file, void *priv,
>> > {
>> > struct vpif_fh *fh = priv;
>> > struct channel_obj *ch = fh->channel;
>> > + int ret;
>> >
>> > - return v4l2_subdev_call(vpif_obj.sd[ch->output_idx],
>> > - video, enum_dv_timings, timings);
>> > + ret = v4l2_subdev_call(ch->sd, video, enum_dv_timings, timings);
>> > + if (ret == -ENOIOCTLCMD && ret == -ENODEV)
>> > + return -EINVAL;
>> > + return ret;
>> > }
>> >
>> > /**
>> > @@ -1320,12 +1402,9 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
>> >
>> > /* Configure subdevice timings, if any */
>> > ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
>> > - if (ret == -ENOIOCTLCMD) {
>> > - vpif_dbg(2, debug, "Custom DV timings not supported by "
>> > - "subdevice\n");
>> > - return -ENODATA;
>> > - }
>> > - if (ret < 0 && ret != -ENODEV) {
>> > + if (ret == -ENOIOCTLCMD || ret == -ENODEV)
>> > + ret = 0;
>> > + if (ret < 0) {
>> > vpif_dbg(2, debug, "Error setting custom DV timings\n");
>> > return ret;
>> > }
>> > @@ -1754,6 +1833,11 @@ static __init int vpif_probe(struct platform_device *pdev)
>> > ch->video_dev->lock = &common->lock;
>> > video_set_drvdata(ch->video_dev, ch);
>> >
>> > + /* select output 0 */
>> > + err = vpif_set_output(config, ch, 0);
>> > + if (err)
>> > + goto probe_out;
>> > +
>> > /* register video device */
>> > vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n",
>> > (int)ch, (int)&ch->video_dev);
>
> Regards,
>
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists