| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1348636814-14129-4-git-send-email-rachna@ti.com>
Date: Wed, 26 Sep 2012 10:50:12 +0530
From: "Patil, Rachna" <rachna@...com>
To: <linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>,
<linux-iio@...r.kernel.org>
CC: Samuel Ortiz <sameo@...ux.intel.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Dmitry Torokhov <dtor@...l.ru>,
Jonathan Cameron <jic23@....ac.uk>,
"Patil, Rachna" <rachna@...com>
Subject: [PATCH v4 3/5] input: TSC: ti_tsc: Convert TSC into a MFDevice
This patch converts touchscreen into a MFD client.
All the register definitions, clock initialization,
etc has been moved to MFD core driver.
Signed-off-by: Patil, Rachna <rachna@...com>
---
Changes in v2:
No changes
Changes in v3:
No changes
Changes in v4:
No changes
drivers/input/touchscreen/ti_am335x_tsc.c | 277 ++++++-----------------------
drivers/mfd/ti_am335x_tscadc.c | 11 ++
include/linux/mfd/ti_am335x_tscadc.h | 10 +-
3 files changed, 74 insertions(+), 224 deletions(-)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index e71dee6..2d9dec1 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -26,123 +26,31 @@
#include <linux/io.h>
#include <linux/input/ti_am335x_tsc.h>
#include <linux/delay.h>
-
-#define REG_RAWIRQSTATUS 0x024
-#define REG_IRQSTATUS 0x028
-#define REG_IRQENABLE 0x02C
-#define REG_IRQWAKEUP 0x034
-#define REG_CTRL 0x040
-#define REG_ADCFSM 0x044
-#define REG_CLKDIV 0x04C
-#define REG_SE 0x054
-#define REG_IDLECONFIG 0x058
-#define REG_CHARGECONFIG 0x05C
-#define REG_CHARGEDELAY 0x060
-#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8))
-#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8))
-#define REG_FIFO0CNT 0xE4
-#define REG_FIFO0THR 0xE8
-#define REG_FIFO1THR 0xF4
-#define REG_FIFO0 0x100
-#define REG_FIFO1 0x200
-
-/* Register Bitfields */
-#define IRQWKUP_ENB BIT(0)
-
-/* Step Enable */
-#define STEPENB_MASK (0x1FFFF << 0)
-#define STEPENB(val) (val << 0)
-#define STPENB_STEPENB STEPENB(0x7FFF)
-
-/* IRQ enable */
-#define IRQENB_FIFO0THRES BIT(2)
-#define IRQENB_FIFO1THRES BIT(5)
-#define IRQENB_PENUP BIT(9)
-
-/* Step Configuration */
-#define STEPCONFIG_MODE_MASK (3 << 0)
-#define STEPCONFIG_MODE(val) (val << 0)
-#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2)
-#define STEPCONFIG_AVG_MASK (7 << 2)
-#define STEPCONFIG_AVG(val) (val << 2)
-#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4)
-#define STEPCONFIG_XPP BIT(5)
-#define STEPCONFIG_XNN BIT(6)
-#define STEPCONFIG_YPP BIT(7)
-#define STEPCONFIG_YNN BIT(8)
-#define STEPCONFIG_XNP BIT(9)
-#define STEPCONFIG_YPN BIT(10)
-#define STEPCONFIG_INM_MASK (0xF << 15)
-#define STEPCONFIG_INM(val) (val << 15)
-#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8)
-#define STEPCONFIG_INP_MASK (0xF << 19)
-#define STEPCONFIG_INP(val) (val << 19)
-#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2)
-#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3)
-#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4)
-#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8)
-#define STEPCONFIG_FIFO1 BIT(26)
-
-/* Delay register */
-#define STEPDELAY_OPEN_MASK (0x3FFFF << 0)
-#define STEPDELAY_OPEN(val) (val << 0)
-#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098)
-
-/* Charge Config */
-#define STEPCHARGE_RFP_MASK (7 << 12)
-#define STEPCHARGE_RFP(val) (val << 12)
-#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1)
-#define STEPCHARGE_INM_MASK (0xF << 15)
-#define STEPCHARGE_INM(val) (val << 15)
-#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1)
-#define STEPCHARGE_INP_MASK (0xF << 19)
-#define STEPCHARGE_INP(val) (val << 19)
-#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1)
-#define STEPCHARGE_RFM_MASK (3 << 23)
-#define STEPCHARGE_RFM(val) (val << 23)
-#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1)
-
-/* Charge delay */
-#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0)
-#define CHARGEDLY_OPEN(val) (val << 0)
-#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1)
-
-/* Control register */
-#define CNTRLREG_TSCSSENB BIT(0)
-#define CNTRLREG_STEPID BIT(1)
-#define CNTRLREG_STEPCONFIGWRT BIT(2)
-#define CNTRLREG_AFE_CTRL_MASK (3 << 5)
-#define CNTRLREG_AFE_CTRL(val) (val << 5)
-#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1)
-#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2)
-#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
-#define CNTRLREG_TSCENB BIT(7)
+#include <linux/mfd/ti_am335x_tscadc.h>
#define ADCFSM_STEPID 0x10
#define SEQ_SETTLE 275
-#define ADC_CLK 3000000
#define MAX_12BIT ((1 << 12) - 1)
struct tscadc {
struct input_dev *input;
- struct clk *tsc_ick;
- void __iomem *tsc_base;
unsigned int irq;
unsigned int wires;
unsigned int x_plate_resistance;
bool pen_down;
int steps_to_configure;
+ struct ti_tscadc_dev *mfd_tscadc;
};
static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
{
- return readl(ts->tsc_base + reg);
+ return readl(ts->mfd_tscadc->tscadc_base + reg);
}
static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
unsigned int val)
{
- writel(val, tsc->tsc_base + reg);
+ writel(val, tsc->mfd_tscadc->tscadc_base + reg);
}
static void tscadc_step_config(struct tscadc *ts_dev)
@@ -219,17 +127,7 @@ static void tscadc_step_config(struct tscadc *ts_dev)
tscadc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
STEPCONFIG_OPENDLY);
- tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-}
-
-static void tscadc_idle_config(struct tscadc *ts_config)
-{
- unsigned int idleconfig;
-
- idleconfig = STEPCONFIG_YNN |
- STEPCONFIG_INM_ADCREFM |
- STEPCONFIG_YPN | STEPCONFIG_INP_ADCREFM;
- tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig);
+ tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
}
static void tscadc_read_coordinates(struct tscadc *ts_dev,
@@ -239,7 +137,7 @@ static void tscadc_read_coordinates(struct tscadc *ts_dev,
unsigned int prev_val_x = ~0, prev_val_y = ~0;
unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
unsigned int read, diff;
- unsigned int i;
+ unsigned int i, channel;
/*
* Delta filter is used to remove large variations in sampled
@@ -250,21 +148,32 @@ static void tscadc_read_coordinates(struct tscadc *ts_dev,
* if true the value is reported to the sub system.
*/
for (i = 0; i < fifocount - 1; i++) {
- read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
- diff = abs(read - prev_val_x);
- if (diff < prev_diff_x) {
- prev_diff_x = diff;
- *x = read;
+ read = tscadc_readl(ts_dev, REG_FIFO0);
+ channel = read & 0xf0000;
+ channel = channel >> 0x10;
+ if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
+ read &= 0xfff;
+ diff = abs(read - prev_val_x);
+ if (diff < prev_diff_x) {
+ prev_diff_x = diff;
+ *x = read;
+ }
+ prev_val_x = read;
}
- prev_val_x = read;
- read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
- diff = abs(read - prev_val_y);
- if (diff < prev_diff_y) {
- prev_diff_y = diff;
- *y = read;
- }
+ read = tscadc_readl(ts_dev, REG_FIFO1);
+ channel = read & 0xf0000;
+ channel = channel >> 0x10;
+ if ((channel >= ts_dev->steps_to_configure) &&
+ (channel < (2 * ts_dev->steps_to_configure - 1))) {
+ read &= 0xfff;
+ diff = abs(read - prev_val_y);
+ if (diff < prev_diff_y) {
+ prev_diff_y = diff;
+ *y = read;
+ }
prev_val_y = read;
+ }
}
}
@@ -276,6 +185,8 @@ static irqreturn_t tscadc_irq(int irq, void *dev)
unsigned int x = 0, y = 0;
unsigned int z1, z2, z;
unsigned int fsm;
+ unsigned int fifo1count, fifo0count;
+ int i;
status = tscadc_readl(ts_dev, REG_IRQSTATUS);
if (status & IRQENB_FIFO0THRES) {
@@ -284,6 +195,14 @@ static irqreturn_t tscadc_irq(int irq, void *dev)
z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
+ fifo1count = tscadc_readl(ts_dev, REG_FIFO1CNT);
+ for (i = 0; i < fifo1count; i++)
+ tscadc_readl(ts_dev, REG_FIFO1);
+
+ fifo0count = tscadc_readl(ts_dev, REG_FIFO0CNT);
+ for (i = 0; i < fifo0count; i++)
+ tscadc_readl(ts_dev, REG_FIFO0);
+
if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
/*
* Calculate pressure using formula
@@ -340,28 +259,15 @@ static irqreturn_t tscadc_irq(int irq, void *dev)
static int __devinit tscadc_probe(struct platform_device *pdev)
{
- const struct tsc_data *pdata = pdev->dev.platform_data;
- struct resource *res;
struct tscadc *ts_dev;
struct input_dev *input_dev;
- struct clk *clk;
int err;
- int clk_value, ctrl, irq;
+ struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct mfd_tscadc_board *pdata;
+ pdata = (struct mfd_tscadc_board *)tscadc_dev->dev->platform_data;
if (!pdata) {
- dev_err(&pdev->dev, "missing platform data.\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no memory resource defined.\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no irq ID is specified.\n");
+ dev_err(tscadc_dev->dev, "Could not find platform data\n");
return -EINVAL;
}
@@ -374,85 +280,26 @@ static int __devinit tscadc_probe(struct platform_device *pdev)
goto err_free_mem;
}
+ tscadc_dev->tsc = ts_dev;
+ ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
- ts_dev->irq = irq;
- ts_dev->wires = pdata->wires;
- ts_dev->x_plate_resistance = pdata->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->steps_to_configure;
-
- res = request_mem_region(res->start, resource_size(res), pdev->name);
- if (!res) {
- dev_err(&pdev->dev, "failed to reserve registers.\n");
- err = -EBUSY;
- goto err_free_mem;
- }
-
- ts_dev->tsc_base = ioremap(res->start, resource_size(res));
- if (!ts_dev->tsc_base) {
- dev_err(&pdev->dev, "failed to map registers.\n");
- err = -ENOMEM;
- goto err_release_mem_region;
- }
+ ts_dev->irq = tscadc_dev->irq;
+ ts_dev->wires = pdata->tsc_init->wires;
+ ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
+ ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
err = request_irq(ts_dev->irq, tscadc_irq,
0, pdev->dev.driver->name, ts_dev);
if (err) {
dev_err(&pdev->dev, "failed to allocate irq.\n");
- goto err_unmap_regs;
- }
-
- ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick");
- if (IS_ERR(ts_dev->tsc_ick)) {
- dev_err(&pdev->dev, "failed to get TSC ick\n");
- goto err_free_irq;
- }
- clk_enable(ts_dev->tsc_ick);
-
- clk = clk_get(&pdev->dev, "adc_tsc_fck");
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "failed to get TSC fck\n");
- err = PTR_ERR(clk);
- goto err_disable_clk;
- }
-
- clk_value = clk_get_rate(clk) / ADC_CLK;
- clk_put(clk);
-
- if (clk_value < 7) {
- dev_err(&pdev->dev, "clock input less than min clock requirement\n");
- goto err_disable_clk;
- }
- /* CLKDIV needs to be configured to the value minus 1 */
- tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1);
-
- /* Enable wake-up of the SoC using touchscreen */
- tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
-
- ctrl = CNTRLREG_STEPCONFIGWRT |
- CNTRLREG_TSCENB |
- CNTRLREG_STEPID;
- switch (ts_dev->wires) {
- case 4:
- ctrl |= CNTRLREG_4WIRE;
- break;
- case 5:
- ctrl |= CNTRLREG_5WIRE;
- break;
- case 8:
- ctrl |= CNTRLREG_8WIRE;
- break;
+ goto err_free_mem;
}
- tscadc_writel(ts_dev, REG_CTRL, ctrl);
- tscadc_idle_config(ts_dev);
tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
tscadc_step_config(ts_dev);
tscadc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
- ctrl |= CNTRLREG_TSCSSENB;
- tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
- input_dev->name = "ti-tsc-adc";
+ input_dev->name = "ti-tsc";
input_dev->dev.parent = &pdev->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
@@ -465,20 +312,13 @@ static int __devinit tscadc_probe(struct platform_device *pdev)
/* register to the input system */
err = input_register_device(input_dev);
if (err)
- goto err_disable_clk;
+ goto err_free_irq;
platform_set_drvdata(pdev, ts_dev);
return 0;
-err_disable_clk:
- clk_disable(ts_dev->tsc_ick);
- clk_put(ts_dev->tsc_ick);
err_free_irq:
free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
- iounmap(ts_dev->tsc_base);
-err_release_mem_region:
- release_mem_region(res->start, resource_size(res));
err_free_mem:
input_free_device(input_dev);
kfree(ts_dev);
@@ -487,22 +327,13 @@ err_free_mem:
static int __devexit tscadc_remove(struct platform_device *pdev)
{
- struct tscadc *ts_dev = platform_get_drvdata(pdev);
- struct resource *res;
+ struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+ struct tscadc *ts_dev = tscadc_dev->tsc;
free_irq(ts_dev->irq, ts_dev);
-
input_unregister_device(ts_dev->input);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- iounmap(ts_dev->tsc_base);
- release_mem_region(res->start, resource_size(res));
-
- clk_disable(ts_dev->tsc_ick);
- clk_put(ts_dev->tsc_ick);
-
kfree(ts_dev);
-
platform_set_drvdata(pdev, NULL);
return 0;
}
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index ae93b48..168313e 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -22,6 +22,7 @@
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
#include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/input/ti_am335x_tsc.h>
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
{
@@ -50,15 +51,19 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev)
struct resource *res;
struct clk *clk;
struct mfd_tscadc_board *pdata = pdev->dev.platform_data;
+ struct mfd_cell *cell;
int irq;
int err, ctrl;
int clk_value, clock_rate;
+ int tsc_wires;
if (!pdata) {
dev_err(&pdev->dev, "Could not find platform data\n");
return -EINVAL;
}
+ tsc_wires = pdata->tsc_init->wires;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no memory resource defined.\n");
@@ -138,6 +143,12 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev)
ctrl |= CNTRLREG_TSCSSENB;
tscadc_writel(tscadc, REG_CTRL, ctrl);
+ /* TSC Cell */
+ cell = &tscadc->cells[TSC_CELL];
+ cell->name = "tsc";
+ cell->platform_data = tscadc;
+ cell->pdata_size = sizeof(*tscadc);
+
err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
TSCADC_CELLS, NULL, 0, NULL);
if (err < 0)
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index b1eec17..458accd 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -44,6 +44,7 @@
#define STEPENB_MASK (0x1FFFF << 0)
#define STEPENB(val) ((val) << 0)
#define STPENB_STEPENB STEPENB(0x1FFFF)
+#define STPENB_STEPENB_TC STEPENB(0x1FFF)
/* IRQ enable */
#define IRQENB_HW_PEN BIT(0)
@@ -117,7 +118,11 @@
#define ADC_CLK 3000000
#define MAX_CLK_DIV 7
-#define TSCADC_CELLS 0
+#define TSCADC_CELLS 1
+
+enum tscadc_cells {
+ TSC_CELL,
+};
struct mfd_tscadc_board {
struct tsc_data *tsc_init;
@@ -128,6 +133,9 @@ struct ti_tscadc_dev {
void __iomem *tscadc_base;
int irq;
struct mfd_cell cells[TSCADC_CELLS];
+
+ /* tsc device */
+ struct tscadc *tsc;
};
#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists