linux-kernel - [ 172/262] tty: serial: imx: dont reinit clock in imx_setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20120928183018.319356722@linuxfoundation.org>
Date:	Fri, 28 Sep 2012 11:51:41 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:	Greg KH <gregkh@...uxfoundation.org>, alan@...rguk.ukuu.org.uk,
	Dirk Behme <dirk.behme@...bosch.com>,
	Shawn Guo <shawn.guo@...aro.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Troy Kisky <troy.kisky@...ndarydevices.com>,
	Xinyu Chen <xinyu.chen@...escale.com>
Subject: [ 172/262] tty: serial: imx: dont reinit clock in imx_setup_ufcr()

From: Greg KH <gregkh@...uxfoundation.org>

3.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dirk Behme <dirk.behme@...bosch.com>

commit 7be0670f7b9198382938a03ff3db7f47ef6b4780 upstream.

Remove the clock configuration from imx_setup_ufcr(). This
isn't needed here and will cause garbage output if done.

To be be sure that we only touch the bits we want (TXTL and RXTL)
we have to mask out all other bits of the UFCR register. Add
one non-existing bit macro for this, too (bit 6, DCEDTE on i.MX6).

Signed-off-by: Dirk Behme <dirk.behme@...bosch.com>
CC: Shawn Guo <shawn.guo@...aro.org>
CC: Sascha Hauer <s.hauer@...gutronix.de>
CC: Troy Kisky <troy.kisky@...ndarydevices.com>
CC: Xinyu Chen <xinyu.chen@...escale.com>
Acked-by: Shawn Guo <shawn.guo@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/tty/serial/imx.c |   18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -132,6 +132,7 @@
 #define  UCR4_OREN  	 (1<<1)  /* Receiver overrun interrupt enable */
 #define  UCR4_DREN  	 (1<<0)  /* Recv data ready interrupt enable */
 #define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
+#define  UFCR_DCEDTE	 (1<<6)  /* DCE/DTE mode select */
 #define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
 #define  UFCR_RFDIV_REG(x)	(((x) < 7 ? 6 - (x) : 6) << 7)
 #define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
@@ -668,22 +669,11 @@ static void imx_break_ctl(struct uart_po
 static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
 {
 	unsigned int val;
-	unsigned int ufcr_rfdiv;
-
-	/* set receiver / transmitter trigger level.
-	 * RFDIV is set such way to satisfy requested uartclk value
-	 */
-	val = TXTL << 10 | RXTL;
-	ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2)
-			/ sport->port.uartclk;
-
-	if(!ufcr_rfdiv)
-		ufcr_rfdiv = 1;
-
-	val |= UFCR_RFDIV_REG(ufcr_rfdiv);
 
+	/* set receiver / transmitter trigger level */
+	val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+	val |= TXTL << UFCR_TXTL_SHF | RXTL;
 	writel(val, sport->port.membase + UFCR);
-
 	return 0;
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/