| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1349363872-27004-4-git-send-email-florian@openwrt.org>
Date: Thu, 4 Oct 2012 17:17:31 +0200
From: Florian Fainelli <florian@...nwrt.org>
To: stern@...land.harvard.edu
Cc: linux-usb@...r.kernel.org, Florian Fainelli <florian@...nwrt.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH 03/24 v2] USB: EHCI: remove Loongson 1B EHCI driver.
The platform code registering the Loongson 1B EHCI driver has now been
converted to register the ehci-platform driver instead, thus obsoleting the
ehci-ls1x driver, which can be removed.
Signed-off-by: Florian Fainelli <florian@...nwrt.org>
---
Changes since v1:
- reworded commit message
drivers/usb/host/ehci-hcd.c | 5 --
drivers/usb/host/ehci-ls1x.c | 147 ------------------------------------------
2 files changed, 152 deletions(-)
delete mode 100644 drivers/usb/host/ehci-ls1x.c
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 442f774..2f517d9 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1319,11 +1319,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_mv_driver
#endif
-#ifdef CONFIG_MACH_LOONGSON1
-#include "ehci-ls1x.c"
-#define PLATFORM_DRIVER ehci_ls1x_driver
-#endif
-
#ifdef CONFIG_MIPS_SEAD3
#include "ehci-sead3.c"
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
deleted file mode 100644
index ca75965..0000000
--- a/drivers/usb/host/ehci-ls1x.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Bus Glue for Loongson LS1X built-in EHCI controller.
- *
- * Copyright (c) 2012 Zhang, Keguang <keguang.zhang@...il.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/platform_device.h>
-
-static int ehci_ls1x_reset(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int ret;
-
- ehci->caps = hcd->regs;
-
- ret = ehci_setup(hcd);
- if (ret)
- return ret;
-
- ehci_port_power(ehci, 0);
-
- return 0;
-}
-
-static const struct hc_driver ehci_ls1x_hc_driver = {
- .description = hcd_name,
- .product_desc = "LOONGSON1 EHCI",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_ls1x_reset,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- struct resource *res;
- int irq;
- int ret;
-
- pr_debug("initializing loongson1 ehci USB Controller\n");
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
- irq = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no register addr. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
-
- hcd = usb_create_hcd(&ehci_ls1x_hc_driver, &pdev->dev,
- dev_name(&pdev->dev));
- if (!hcd)
- return -ENOMEM;
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (hcd->regs == NULL) {
- dev_dbg(&pdev->dev, "error mapping memory\n");
- ret = -EFAULT;
- goto err_put_hcd;
- }
-
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret)
- goto err_put_hcd;
-
- return ret;
-
-err_put_hcd:
- usb_put_hcd(hcd);
- return ret;
-}
-
-static int ehci_hcd_ls1x_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-static struct platform_driver ehci_ls1x_driver = {
- .probe = ehci_hcd_ls1x_probe,
- .remove = ehci_hcd_ls1x_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ls1x-ehci",
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ls1x-ehci");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists