| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1349330819-11924-1-git-send-email-thierry.reding@avionic-design.de> Date: Thu, 4 Oct 2012 08:06:59 +0200 From: Thierry Reding <thierry.reding@...onic-design.de> To: linux-kernel@...r.kernel.org Cc: Russell King <linux@....linux.org.uk>, Shawn Guo <shawn.guo@...aro.org>, Eric Miao <eric.y.miao@...il.com>, Haojian Zhuang <haojian.zhuang@...il.com>, Ralf Baechle <ralf@...ux-mips.org>, Dmitry Torokhov <dmitry.torokhov@...il.com>, Bryan Wu <bryan.wu@...onical.com>, Richard Purdie <rpurdie@...ys.net>, Samuel Ortiz <sameo@...ux.intel.com>, Ashish Jangam <ashish.jangam@...tcummins.com>, Andrew Jones <drjones@...hat.com>, linux-arm-kernel@...ts.infradead.org, linux-mips@...ux-mips.org, linux-input@...r.kernel.org, linux-leds@...r.kernel.org Subject: [PATCH] pwm: Get rid of HAVE_PWM Now that all drivers have been moved to the PWM subsystem, remove the legacy HAVE_PWM symbol and replace it with the new PWM symbol. While at it, select the PWM subsystem and corresponding PWM driver on boards that require PWM functionality. Signed-off-by: Thierry Reding <thierry.reding@...onic-design.de> Cc: Russell King <linux@....linux.org.uk> Cc: Shawn Guo <shawn.guo@...aro.org> Cc: Eric Miao <eric.y.miao@...il.com> Cc: Haojian Zhuang <haojian.zhuang@...il.com> Cc: Ralf Baechle <ralf@...ux-mips.org> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com> Cc: Bryan Wu <bryan.wu@...onical.com> Cc: Richard Purdie <rpurdie@...ys.net> Cc: Samuel Ortiz <sameo@...ux.intel.com> Cc: Ashish Jangam <ashish.jangam@...tcummins.com> Cc: Andrew Jones <drjones@...hat.com> Cc: linux-arm-kernel@...ts.infradead.org Cc: linux-kernel@...r.kernel.org Cc: linux-mips@...ux-mips.org Cc: linux-input@...r.kernel.org Cc: linux-leds@...r.kernel.org --- arch/arm/Kconfig | 6 ++---- arch/arm/mach-mxs/Kconfig | 6 ++++-- arch/arm/mach-pxa/Kconfig | 42 ++++++++++++++++++++++++++++-------------- arch/mips/Kconfig | 3 ++- drivers/input/misc/Kconfig | 4 ++-- drivers/leds/Kconfig | 2 +- include/linux/pwm.h | 2 +- 7 files changed, 40 insertions(+), 25 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cd..a0cebf8 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -69,9 +69,6 @@ config ARM_DMA_USE_IOMMU select ARM_HAS_SG_CHAIN bool -config HAVE_PWM - bool - config MIGHT_HAVE_PCI bool @@ -610,7 +607,8 @@ config ARCH_LPC32XX select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select USE_OF - select HAVE_PWM + select PWM + select PWM_LPC32XX help Support for the NXP LPC32XX family of processors diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 9a8bbda..2fc01bd 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -6,7 +6,8 @@ config SOC_IMX23 bool select ARM_AMBA select CPU_ARM926T - select HAVE_PWM + select PWM + select PWM_MXS select PINCTRL_IMX23 config SOC_IMX28 @@ -14,7 +15,8 @@ config SOC_IMX28 select ARM_AMBA select CPU_ARM926T select HAVE_CAN_FLEXCAN if CAN - select HAVE_PWM + select PWM + select PWM_MXS select PINCTRL_IMX28 comment "MXS platforms:" diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index fe2d1f8..14f41c3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -33,12 +33,14 @@ config ARCH_LUBBOCK config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x - select HAVE_PWM + select PWM + select PWM_PXA config MACH_ZYLONITE bool select PXA3xx - select HAVE_PWM + select PWM + select PWM_PXA config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -78,7 +80,8 @@ config ARCH_VIPER select PXA25x select ISA select I2C_GPIO - select HAVE_PWM + select PWM + select PWM_PXA select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -128,7 +131,8 @@ config MACH_CM_X300 select PXA3xx select CPU_PXA300 select CPU_PXA310 - select HAVE_PWM + select PWM + select PWM_PXA config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" @@ -220,7 +224,8 @@ config TRIZEPS_PCMCIA config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x - select HAVE_PWM + select PWM + select PWM_PXA config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" @@ -229,7 +234,8 @@ config MACH_PCM027 config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" - select HAVE_PWM + select PWM + select PWM_PXA depends on MACH_PCM027 choice @@ -255,7 +261,8 @@ config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" depends on MACH_COLIBRI select PXA27x - select HAVE_PWM + select PWM + select PWM_PXA config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" @@ -285,7 +292,8 @@ config MACH_H4700 bool "HP iPAQ hx4700" select PXA27x select IWMMXT - select HAVE_PWM + select PWM + select PWM_PXA config MACH_H5000 bool "HP iPAQ h5000" @@ -299,13 +307,15 @@ config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT - select HAVE_PWM + select PWM + select PWM_PXA config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x select IWMMXT - select HAVE_PWM + select PWM + select PWM_PXA select GPIO_SYSFS help Say Y here if you intend to run this kernel on a @@ -316,7 +326,8 @@ config PXA_EZX bool "Motorola EZX Platform" select PXA27x select IWMMXT - select HAVE_PWM + select PWM + select PWM_PXA config MACH_EZX_A780 bool "Motorola EZX A780" @@ -354,7 +365,8 @@ config MACH_MP900C config ARCH_PXA_PALM bool "PXA based Palm PDAs" - select HAVE_PWM + select PWM + select PWM_PXA config MACH_PALM27X bool @@ -454,7 +466,8 @@ config MACH_RAUMFELD_RC select PXA3xx select CPU_PXA300 select POWER_SUPPLY - select HAVE_PWM + select PWM + select PWM_PXA config MACH_RAUMFELD_CONNECTOR bool "Raumfeld Connector" @@ -617,7 +630,8 @@ config MACH_E800 config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x - select HAVE_PWM + select PWM + select PWM_PXA endif endmenu diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574..b38f23d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -219,7 +219,8 @@ config MACH_JZ4740 select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select SYS_HAS_EARLY_PRINTK - select HAVE_PWM + select PWM + select PWM_JZ4740 select HAVE_CLK select GENERIC_IRQ_CHIP diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7c0f1ec..af6188b 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -146,7 +146,7 @@ config INPUT_MAX8925_ONKEY config INPUT_MAX8997_HAPTIC tristate "MAXIM MAX8997 haptic controller support" - depends on HAVE_PWM && MFD_MAX8997 + depends on PWM && MFD_MAX8997 select INPUT_FF_MEMLESS help This option enables device driver support for the haptic controller @@ -444,7 +444,7 @@ config INPUT_PCF8574 config INPUT_PWM_BEEPER tristate "PWM beeper support" - depends on HAVE_PWM + depends on PWM help Say Y here to get support for PWM based beeper devices. diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index c96bbaa..a720d99 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -298,7 +298,7 @@ config LEDS_DAC124S085 config LEDS_PWM tristate "PWM driven LED Support" depends on LEDS_CLASS - depends on HAVE_PWM + depends on PWM help This option enables support for pwm driven LEDs diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 112b314..eea3f26 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -7,7 +7,7 @@ struct pwm_device; struct seq_file; -#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM) +#if IS_ENABLED(CONFIG_PWM) /* * pwm_request - request a PWM device */ -- 1.7.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists