| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1349454064-11606-2-git-send-email-florian@openwrt.org>
Date: Fri, 5 Oct 2012 18:20:33 +0200
From: Florian Fainelli <florian@...nwrt.org>
To: stern@...land.harvard.edu
Cc: linux-usb@...r.kernel.org, Florian Fainelli <florian@...nwrt.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org
Subject: [PATCH 01/32 v3] USB: EHCI: remove IXP4xx EHCI driver
This driver is not registered by any in-tree user. If needed it the EHCI
driver can be reinstatied using the ehci-platform driver with caps_offset to
0x100.
Signed-off-by: Florian Fainelli <florian@...nwrt.org>
---
No changes in v3
Changes in v2:
- slightly reworded commit message
drivers/usb/host/ehci-hcd.c | 5 --
drivers/usb/host/ehci-ixp4xx.c | 139 ----------------------------------------
2 files changed, 144 deletions(-)
delete mode 100644 drivers/usb/host/ehci-ixp4xx.c
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 6bf6c42..442f774 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_orion_driver
#endif
-#ifdef CONFIG_ARCH_IXP4XX
-#include "ehci-ixp4xx.c"
-#define PLATFORM_DRIVER ixp4xx_ehci_driver
-#endif
-
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
deleted file mode 100644
index f224c0a..0000000
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * IXP4XX EHCI Host Controller Driver
- *
- * Author: Vladimir Barinov <vbarinov@...eddedalley.com>
- *
- * Based on "ehci-fsl.c" by Randy Vinson <rvinson@...sta.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/platform_device.h>
-
-static int ixp4xx_ehci_init(struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- int retval = 0;
-
- ehci->big_endian_desc = 1;
- ehci->big_endian_mmio = 1;
-
- ehci->caps = hcd->regs + 0x100;
-
- hcd->has_tt = 1;
-
- retval = ehci_setup(hcd);
- if (retval)
- return retval;
-
- ehci_port_power(ehci, 0);
-
- return retval;
-}
-
-static const struct hc_driver ixp4xx_ehci_hc_driver = {
- .description = hcd_name,
- .product_desc = "IXP4XX EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
- .reset = ixp4xx_ehci_init,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
- .get_frame_number = ehci_get_frame,
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
-#if defined(CONFIG_PM)
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
-#endif
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
-static int ixp4xx_ehci_probe(struct platform_device *pdev)
-{
- struct usb_hcd *hcd;
- const struct hc_driver *driver = &ixp4xx_ehci_hc_driver;
- struct resource *res;
- int irq;
- int retval;
-
- if (usb_disabled())
- return -ENODEV;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no IRQ. Check %s setup!\n",
- dev_name(&pdev->dev));
- return -ENODEV;
- }
- irq = res->start;
-
- hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd) {
- retval = -ENOMEM;
- goto fail_create_hcd;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev,
- "Found HC with no register addr. Check %s setup!\n",
- dev_name(&pdev->dev));
- retval = -ENODEV;
- goto fail_request_resource;
- }
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
-
- hcd->regs = devm_request_and_ioremap(&pdev->dev, res);
- if (hcd->regs == NULL) {
- dev_dbg(&pdev->dev, "error mapping memory\n");
- retval = -EFAULT;
- goto fail_request_resource;
- }
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval)
- goto fail_request_resource;
-
- return retval;
-
-fail_request_resource:
- usb_put_hcd(hcd);
-fail_create_hcd:
- dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
- return retval;
-}
-
-static int ixp4xx_ehci_remove(struct platform_device *pdev)
-{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
-
- return 0;
-}
-
-MODULE_ALIAS("platform:ixp4xx-ehci");
-
-static struct platform_driver ixp4xx_ehci_driver = {
- .probe = ixp4xx_ehci_probe,
- .remove = ixp4xx_ehci_remove,
- .driver = {
- .name = "ixp4xx-ehci",
- },
-};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists