[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1349422868.21172.38.camel@edumazet-glaptop>
Date: Fri, 05 Oct 2012 09:41:08 +0200
From: Eric Dumazet <eric.dumazet@...il.com>
To: mbizon@...ebox.fr
Cc: David Madore <david+ml@...ore.org>,
Francois Romieu <romieu@...zoreil.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, Hugh Dickins <hughd@...gle.com>
Subject: Re: kernel 3.2.27 on arm: WARNING: at mm/page_alloc.c:2109
__alloc_pages_nodemask+0x1d4/0x68c()
On Thu, 2012-10-04 at 18:29 +0200, Eric Dumazet wrote:
> On Thu, 2012-10-04 at 18:02 +0200, Maxime Bizon wrote:
> > On Fri, 2012-08-31 at 19:21 -0700, Hugh Dickins wrote:
> >
> > Hi,
> >
> > > Francois is right that a GFP_ATOMIC allocation from pskb_expand_head()
> > > is failing, which can easily happen, and cause your "failed to reallocate
> > > TX buffer" errors; but it's well worth looking up what's actually on
> > > lines 2108 and 2109 of mm/page_alloc.c in 3.2.27:
> > >
> > > if (order >= MAX_ORDER) {
> > > WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
> > >
> > > That was probably not a sane allocation request, it has gone out of range:
> > > maybe the skb header is even corrupted. If you're lucky, it might be
> > > something that netdev will recognize as already fixed.
> >
> > I have the same problem on the exact same hardware and found the cause:
> >
> > Author: Eric Dumazet <eric.dumazet@...il.com>
> > Date: Tue Apr 10 20:08:39 2012 +0000
> >
> > net: allow pskb_expand_head() to get maximum tailroom
> >
> > [ Upstream commit 87151b8689d890dfb495081f7be9b9e257f7a2df ]
> >
> >
> > It turns out this change has a bad side effect on drivers that uses
> > skb_recycle(), in that case mv643xx_eth.c
> >
> > Since skb_recycle() resets skb->data using (skb->head + NET_SKB_PAD), a
> > recycled skb going multiple times through a path that needs to expand
> > skb head will get bigger and bigger each time, and you eventually end up
> > with an allocation failure.
> >
> > An idea to fix this would be to pass needed skb size to skb_resize() and
> > set skb->data to MIN(NET_SKB_PAD, (skb->end - skb->head - skb_size) / 2)
> >
> > skb recycling gives a small speed boost, but does not get a lot of test
> > coverage since only 3 drivers uses it
> >
>
> Thanks Maxime
By the way, the commit you pointed has no effect on the reallocation
performed by pskb_expand_head() :
int size = nhead + skb_end_offset(skb) + ntail;
So pskb_expand_head() always assumed the current head is fully used, and
because we have some kmalloc-power-of-two contraints, each time
pskb_expand_head() is called with a non zero (nhead + ntail) we double
the skb->head ksize.
So why are we using skb_end_offset(skb) here is the question.
I guess it could be (skb_tail_pointer(skb) - skb->head) on some uses.
(ie not counting the unused bytes from tail_pointer to end_pointer)
Its probably long to audit all pskb_expand_head() users (about 77 in
tree), but most of them use (nhead = 0, ntail = 0)
It looks like the following patch should be fine.
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index cdc2859..dd42c6a 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1053,11 +1053,22 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
{
int i;
u8 *data;
- int size = nhead + skb_end_offset(skb) + ntail;
+ unsigned int tail_offset = skb_tail_pointer(skb) - skb->head;
+ int size = nhead + ntail;
long off;
BUG_ON(nhead < 0);
+ /* callers using nhead == 0 and ntail == 0 want to get a fresh copy,
+ * so allocate same amount of memory (skb_end_offset)
+ * For others, they want extra headroom or tailroom against the
+ * currently used portion of header (skb->head -> skb_tail_pointer)
+ */
+ if (!size)
+ size = skb_end_offset(skb);
+ else
+ size += tail_offset;
+
if (skb_shared(skb))
BUG();
@@ -1074,7 +1085,7 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
/* Copy only real data... and, alas, header. This should be
* optimized for the cases when header is void.
*/
- memcpy(data + nhead, skb->head, skb_tail_pointer(skb) - skb->head);
+ memcpy(data + nhead, skb->head, tail_offset);
memcpy((struct skb_shared_info *)(data + size),
skb_shinfo(skb),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists