| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <d978348b300595b067b80980f6a78db09fcd584c.1349554105.git.len.brown@intel.com>
Date: Sat, 6 Oct 2012 16:09:24 -0400
From: Len Brown <lenb@...nel.org>
To: linux-acpi@...r.kernel.org, linux-pm@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Bob Moore <robert.moore@...el.com>,
Feng Tang <feng.tang@...el.com>,
Len Brown <len.brown@...el.com>
Subject: [PATCH 03/49] ACPICA: Split ACPICA initialization functions to new file, utxfinit.c
From: Bob Moore <robert.moore@...el.com>
Split utxface.c to improve modularity and reduce file size.
Signed-off-by: Bob Moore <robert.moore@...el.com>
Signed-off-by: Feng Tang <feng.tang@...el.com>
Signed-off-by: Len Brown <len.brown@...el.com>
---
drivers/acpi/acpica/Makefile | 1 +
drivers/acpi/acpica/utxface.c | 267 +---------------------------------
drivers/acpi/acpica/utxfinit.c | 317 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 319 insertions(+), 266 deletions(-)
create mode 100644 drivers/acpi/acpica/utxfinit.c
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 0a1b343..7f1d407 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -158,5 +158,6 @@ acpi-y += \
utresrc.o \
utstate.o \
utxface.o \
+ utxfinit.o \
utxferror.o \
utxfmutex.o
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 534179f..667229d 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Module Name: utxface - External interfaces for "global" ACPI functions
+ * Module Name: utxface - External interfaces, miscellaneous utility functions
*
*****************************************************************************/
@@ -53,271 +53,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxface")
-#ifndef ACPI_ASL_COMPILER
-/*******************************************************************************
- *
- * FUNCTION: acpi_initialize_subsystem
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Initializes all global variables. This is the first function
- * called, so any early initialization belongs here.
- *
- ******************************************************************************/
-acpi_status __init acpi_initialize_subsystem(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
-
- acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
- ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
-
- /* Initialize the OS-Dependent layer */
-
- status = acpi_os_initialize();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
- return_ACPI_STATUS(status);
- }
-
- /* Initialize all globals used by the subsystem */
-
- status = acpi_ut_init_globals();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "During initialization of globals"));
- return_ACPI_STATUS(status);
- }
-
- /* Create the default mutex objects */
-
- status = acpi_ut_mutex_initialize();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "During Global Mutex creation"));
- return_ACPI_STATUS(status);
- }
-
- /*
- * Initialize the namespace manager and
- * the root of the namespace tree
- */
- status = acpi_ns_root_initialize();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "During Namespace initialization"));
- return_ACPI_STATUS(status);
- }
-
- /* Initialize the global OSI interfaces list with the static names */
-
- status = acpi_ut_initialize_interfaces();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "During OSI interfaces initialization"));
- return_ACPI_STATUS(status);
- }
-
- /* If configured, initialize the AML debugger */
-
- ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_enable_subsystem
- *
- * PARAMETERS: flags - Init/enable Options
- *
- * RETURN: Status
- *
- * DESCRIPTION: Completes the subsystem initialization including hardware.
- * Puts system into ACPI mode if it isn't already.
- *
- ******************************************************************************/
-acpi_status acpi_enable_subsystem(u32 flags)
-{
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
-
-#if (!ACPI_REDUCED_HARDWARE)
-
- /* Enable ACPI mode */
-
- if (!(flags & ACPI_NO_ACPI_ENABLE)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Going into ACPI mode\n"));
-
- acpi_gbl_original_mode = acpi_hw_get_mode();
-
- status = acpi_enable();
- if (ACPI_FAILURE(status)) {
- ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Obtain a permanent mapping for the FACS. This is required for the
- * Global Lock and the Firmware Waking Vector
- */
- status = acpi_tb_initialize_facs();
- if (ACPI_FAILURE(status)) {
- ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
- return_ACPI_STATUS(status);
- }
-#endif /* !ACPI_REDUCED_HARDWARE */
-
- /*
- * Install the default op_region handlers. These are installed unless
- * other handlers have already been installed via the
- * install_address_space_handler interface.
- */
- if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Installing default address space handlers\n"));
-
- status = acpi_ev_install_region_handlers();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-#if (!ACPI_REDUCED_HARDWARE)
- /*
- * Initialize ACPI Event handling (Fixed and General Purpose)
- *
- * Note1: We must have the hardware and events initialized before we can
- * execute any control methods safely. Any control method can require
- * ACPI hardware support, so the hardware must be fully initialized before
- * any method execution!
- *
- * Note2: Fixed events are initialized and enabled here. GPEs are
- * initialized, but cannot be enabled until after the hardware is
- * completely initialized (SCI and global_lock activated)
- */
- if (!(flags & ACPI_NO_EVENT_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Initializing ACPI events\n"));
-
- status = acpi_ev_initialize_events();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Install the SCI handler and Global Lock handler. This completes the
- * hardware initialization.
- */
- if (!(flags & ACPI_NO_HANDLER_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Installing SCI/GL handlers\n"));
-
- status = acpi_ev_install_xrupt_handlers();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-#endif /* !ACPI_REDUCED_HARDWARE */
-
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_initialize_objects
- *
- * PARAMETERS: flags - Init/enable Options
- *
- * RETURN: Status
- *
- * DESCRIPTION: Completes namespace initialization by initializing device
- * objects and executing AML code for Regions, buffers, etc.
- *
- ******************************************************************************/
-acpi_status acpi_initialize_objects(u32 flags)
-{
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE(acpi_initialize_objects);
-
- /*
- * Run all _REG methods
- *
- * Note: Any objects accessed by the _REG methods will be automatically
- * initialized, even if they contain executable AML (see the call to
- * acpi_ns_initialize_objects below).
- */
- if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Executing _REG OpRegion methods\n"));
-
- status = acpi_ev_initialize_op_regions();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Execute any module-level code that was detected during the table load
- * phase. Although illegal since ACPI 2.0, there are many machines that
- * contain this type of code. Each block of detected executable AML code
- * outside of any control method is wrapped with a temporary control
- * method object and placed on a global list. The methods on this list
- * are executed below.
- */
- acpi_ns_exec_module_code_list();
-
- /*
- * Initialize the objects that remain uninitialized. This runs the
- * executable AML that may be part of the declaration of these objects:
- * operation_regions, buffer_fields, Buffers, and Packages.
- */
- if (!(flags & ACPI_NO_OBJECT_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Completing Initialization of ACPI Objects\n"));
-
- status = acpi_ns_initialize_objects();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Initialize all device objects in the namespace. This runs the device
- * _STA and _INI methods.
- */
- if (!(flags & ACPI_NO_DEVICE_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Initializing ACPI Devices\n"));
-
- status = acpi_ns_initialize_devices();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Empty the caches (delete the cached objects) on the assumption that
- * the table load filled them up more than they will be at runtime --
- * thus wasting non-paged memory.
- */
- status = acpi_purge_cached_objects();
-
- acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
-
-#endif
/*******************************************************************************
*
* FUNCTION: acpi_terminate
diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c
new file mode 100644
index 0000000..14f5236
--- /dev/null
+++ b/drivers/acpi/acpica/utxfinit.c
@@ -0,0 +1,317 @@
+/******************************************************************************
+ *
+ * Module Name: utxfinit - External interfaces for ACPICA initialization
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acevents.h"
+#include "acnamesp.h"
+#include "acdebug.h"
+#include "actables.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utxfinit")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_initialize_subsystem
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initializes all global variables. This is the first function
+ * called, so any early initialization belongs here.
+ *
+ ******************************************************************************/
+acpi_status acpi_initialize_subsystem(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
+
+ acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
+ ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
+
+ /* Initialize the OS-Dependent layer */
+
+ status = acpi_os_initialize();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
+ return_ACPI_STATUS(status);
+ }
+
+ /* Initialize all globals used by the subsystem */
+
+ status = acpi_ut_init_globals();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During initialization of globals"));
+ return_ACPI_STATUS(status);
+ }
+
+ /* Create the default mutex objects */
+
+ status = acpi_ut_mutex_initialize();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During Global Mutex creation"));
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Initialize the namespace manager and
+ * the root of the namespace tree
+ */
+ status = acpi_ns_root_initialize();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During Namespace initialization"));
+ return_ACPI_STATUS(status);
+ }
+
+ /* Initialize the global OSI interfaces list with the static names */
+
+ status = acpi_ut_initialize_interfaces();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "During OSI interfaces initialization"));
+ return_ACPI_STATUS(status);
+ }
+
+ /* If configured, initialize the AML debugger */
+
+ ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
+ return_ACPI_STATUS(status);
+}
+ACPI_EXPORT_SYMBOL(acpi_initialize_subsystem)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_enable_subsystem
+ *
+ * PARAMETERS: flags - Init/enable Options
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Completes the subsystem initialization including hardware.
+ * Puts system into ACPI mode if it isn't already.
+ *
+ ******************************************************************************/
+acpi_status acpi_enable_subsystem(u32 flags)
+{
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
+
+#if (!ACPI_REDUCED_HARDWARE)
+
+ /* Enable ACPI mode */
+
+ if (!(flags & ACPI_NO_ACPI_ENABLE)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Going into ACPI mode\n"));
+
+ acpi_gbl_original_mode = acpi_hw_get_mode();
+
+ status = acpi_enable();
+ if (ACPI_FAILURE(status)) {
+ ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Obtain a permanent mapping for the FACS. This is required for the
+ * Global Lock and the Firmware Waking Vector
+ */
+ status = acpi_tb_initialize_facs();
+ if (ACPI_FAILURE(status)) {
+ ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
+ return_ACPI_STATUS(status);
+ }
+#endif /* !ACPI_REDUCED_HARDWARE */
+
+ /*
+ * Install the default op_region handlers. These are installed unless
+ * other handlers have already been installed via the
+ * install_address_space_handler interface.
+ */
+ if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Installing default address space handlers\n"));
+
+ status = acpi_ev_install_region_handlers();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+#if (!ACPI_REDUCED_HARDWARE)
+ /*
+ * Initialize ACPI Event handling (Fixed and General Purpose)
+ *
+ * Note1: We must have the hardware and events initialized before we can
+ * execute any control methods safely. Any control method can require
+ * ACPI hardware support, so the hardware must be fully initialized before
+ * any method execution!
+ *
+ * Note2: Fixed events are initialized and enabled here. GPEs are
+ * initialized, but cannot be enabled until after the hardware is
+ * completely initialized (SCI and global_lock activated) and the various
+ * initialization control methods are run (_REG, _STA, _INI) on the
+ * entire namespace.
+ */
+ if (!(flags & ACPI_NO_EVENT_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Initializing ACPI events\n"));
+
+ status = acpi_ev_initialize_events();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Install the SCI handler and Global Lock handler. This completes the
+ * hardware initialization.
+ */
+ if (!(flags & ACPI_NO_HANDLER_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Installing SCI/GL handlers\n"));
+
+ status = acpi_ev_install_xrupt_handlers();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+#endif /* !ACPI_REDUCED_HARDWARE */
+
+ return_ACPI_STATUS(status);
+}
+ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_initialize_objects
+ *
+ * PARAMETERS: flags - Init/enable Options
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Completes namespace initialization by initializing device
+ * objects and executing AML code for Regions, buffers, etc.
+ *
+ ******************************************************************************/
+acpi_status acpi_initialize_objects(u32 flags)
+{
+ acpi_status status = AE_OK;
+
+ ACPI_FUNCTION_TRACE(acpi_initialize_objects);
+
+ /*
+ * Run all _REG methods
+ *
+ * Note: Any objects accessed by the _REG methods will be automatically
+ * initialized, even if they contain executable AML (see the call to
+ * acpi_ns_initialize_objects below).
+ */
+ if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Executing _REG OpRegion methods\n"));
+
+ status = acpi_ev_initialize_op_regions();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Execute any module-level code that was detected during the table load
+ * phase. Although illegal since ACPI 2.0, there are many machines that
+ * contain this type of code. Each block of detected executable AML code
+ * outside of any control method is wrapped with a temporary control
+ * method object and placed on a global list. The methods on this list
+ * are executed below.
+ */
+ acpi_ns_exec_module_code_list();
+
+ /*
+ * Initialize the objects that remain uninitialized. This runs the
+ * executable AML that may be part of the declaration of these objects:
+ * operation_regions, buffer_fields, Buffers, and Packages.
+ */
+ if (!(flags & ACPI_NO_OBJECT_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Completing Initialization of ACPI Objects\n"));
+
+ status = acpi_ns_initialize_objects();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Initialize all device objects in the namespace. This runs the device
+ * _STA and _INI methods.
+ */
+ if (!(flags & ACPI_NO_DEVICE_INIT)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "[Init] Initializing ACPI Devices\n"));
+
+ status = acpi_ns_initialize_devices();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Empty the caches (delete the cached objects) on the assumption that
+ * the table load filled them up more than they will be at runtime --
+ * thus wasting non-paged memory.
+ */
+ status = acpi_purge_cached_objects();
+
+ acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
+ return_ACPI_STATUS(status);
+}
+ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
--
1.8.0.rc0.18.gf84667d
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists