| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20121007154803.GB26443@kroah.com>
Date: Sun, 7 Oct 2012 08:48:03 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org,
Andrew Morton <akpm@...ux-foundation.org>,
torvalds@...ux-foundation.org, stable@...r.kernel.org
Cc: lwn@....net, Jiri Slaby <jslaby@...e.cz>
Subject: Re: Linux 3.5.6
diff --git a/Makefile b/Makefile
index b3dfc85..75c7683 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 5
-SUBLEVEL = 5
+SUBLEVEL = 6
EXTRAVERSION =
NAME = Saber-toothed Squirrel
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725..3a57644 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -42,10 +42,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x04
+#define OMAP_UART_SW_TX 0x8
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x04
+#define OMAP_UART_SW_RX 0x2
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 73ef56c..bda833c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -160,7 +160,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
#endif
#ifdef P6_NOP1
-static const unsigned char __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
{
P6_NOP1,
P6_NOP2,
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 46b77ed..a7c6d6a 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned char *buf, int count)
tmp[tpk_curr + 1] = '\0';
printk(KERN_INFO "%s%s", tpk_tag, tmp);
tpk_curr = 0;
- if (buf[i + 1] == '\n')
+ if ((i + 1) < count && buf[i + 1] == '\n')
i++;
break;
case '\n':
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index 47408e8..d10c987 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -435,12 +435,23 @@ efivar_attr_read(struct efivar_entry *entry, char *buf)
if (status != EFI_SUCCESS)
return -EIO;
- if (var->Attributes & 0x1)
+ if (var->Attributes & EFI_VARIABLE_NON_VOLATILE)
str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
- if (var->Attributes & 0x2)
+ if (var->Attributes & EFI_VARIABLE_BOOTSERVICE_ACCESS)
str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
- if (var->Attributes & 0x4)
+ if (var->Attributes & EFI_VARIABLE_RUNTIME_ACCESS)
str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+ if (var->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD)
+ str += sprintf(str, "EFI_VARIABLE_HARDWARE_ERROR_RECORD\n");
+ if (var->Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS)
+ str += sprintf(str,
+ "EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS\n");
+ if (var->Attributes &
+ EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)
+ str += sprintf(str,
+ "EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS\n");
+ if (var->Attributes & EFI_VARIABLE_APPEND_WRITE)
+ str += sprintf(str, "EFI_VARIABLE_APPEND_WRITE\n");
return str - buf;
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 1f6957c..0e4d41e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -757,6 +757,7 @@ int hid_open_report(struct hid_device *device)
struct hid_item item;
unsigned int size;
__u8 *start;
+ __u8 *buf;
__u8 *end;
int ret;
static int (*dispatch_type[])(struct hid_parser *parser,
@@ -775,12 +776,21 @@ int hid_open_report(struct hid_device *device)
return -ENODEV;
size = device->dev_rsize;
+ buf = kmemdup(start, size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
if (device->driver->report_fixup)
- start = device->driver->report_fixup(device, start, &size);
+ start = device->driver->report_fixup(device, buf, &size);
+ else
+ start = buf;
- device->rdesc = kmemdup(start, size, GFP_KERNEL);
- if (device->rdesc == NULL)
+ start = kmemdup(start, size, GFP_KERNEL);
+ kfree(buf);
+ if (start == NULL)
return -ENOMEM;
+
+ device->rdesc = start;
device->rsize = size;
parser = vzalloc(sizeof(struct hid_parser));
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 482f936..a4f9681 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1423,20 +1423,20 @@ static int hid_post_reset(struct usb_interface *intf)
* configuration descriptors passed, we already know that
* the size of the HID report descriptor has not changed.
*/
- rdesc = kmalloc(hid->rsize, GFP_KERNEL);
+ rdesc = kmalloc(hid->dev_rsize, GFP_KERNEL);
if (!rdesc) {
dbg_hid("couldn't allocate rdesc memory (post_reset)\n");
return 1;
}
status = hid_get_class_descriptor(dev,
interface->desc.bInterfaceNumber,
- HID_DT_REPORT, rdesc, hid->rsize);
+ HID_DT_REPORT, rdesc, hid->dev_rsize);
if (status < 0) {
dbg_hid("reading report descriptor failed (post_reset)\n");
kfree(rdesc);
return 1;
}
- status = memcmp(rdesc, hid->rdesc, hid->rsize);
+ status = memcmp(rdesc, hid->dev_rdesc, hid->dev_rsize);
kfree(rdesc);
if (status != 0) {
dbg_hid("report descriptor changed\n");
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 3974c29..69b23c2 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -148,7 +148,7 @@ static int ipoib_stop(struct net_device *dev)
netif_stop_queue(dev);
- ipoib_ib_dev_down(dev, 0);
+ ipoib_ib_dev_down(dev, 1);
ipoib_ib_dev_stop(dev, 0);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 20ebc6f..213965d 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -190,7 +190,9 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
mcast->mcmember = *mcmember;
- /* Set the cached Q_Key before we attach if it's the broadcast group */
+ /* Set the multicast MTU and cached Q_Key before we attach if it's
+ * the broadcast group.
+ */
if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid))) {
spin_lock_irq(&priv->lock);
@@ -198,10 +200,17 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast,
spin_unlock_irq(&priv->lock);
return -EAGAIN;
}
+ priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
spin_unlock_irq(&priv->lock);
priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
set_qkey = 1;
+
+ if (!ipoib_cm_admin_enabled(dev)) {
+ rtnl_lock();
+ dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
+ rtnl_unlock();
+ }
}
if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) {
@@ -589,14 +598,6 @@ void ipoib_mcast_join_task(struct work_struct *work)
return;
}
- priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
-
- if (!ipoib_cm_admin_enabled(dev)) {
- rtnl_lock();
- dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
- rtnl_unlock();
- }
-
ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n");
clear_bit(IPOIB_MCAST_RUN, &priv->flags);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 1b5b0c7..922d845 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -638,9 +638,9 @@ static void srp_reset_req(struct srp_target_port *target, struct srp_request *re
struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL);
if (scmnd) {
+ srp_free_req(target, req, scmnd, 0);
scmnd->result = DID_RESET << 16;
scmnd->scsi_done(scmnd);
- srp_free_req(target, req, scmnd, 0);
}
}
@@ -1687,6 +1687,7 @@ static int srp_abort(struct scsi_cmnd *scmnd)
SRP_TSK_ABORT_TASK);
srp_free_req(target, req, scmnd, 0);
scmnd->result = DID_ABORT << 16;
+ scmnd->scsi_done(scmnd);
return SUCCESS;
}
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 638dae0..1ca41d2 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1520,6 +1520,7 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
unsigned long arg)
{
struct multipath *m = ti->private;
+ struct pgpath *pgpath;
struct block_device *bdev;
fmode_t mode;
unsigned long flags;
@@ -1535,12 +1536,14 @@ again:
if (!m->current_pgpath)
__choose_pgpath(m, 0);
- if (m->current_pgpath) {
- bdev = m->current_pgpath->path.dev->bdev;
- mode = m->current_pgpath->path.dev->mode;
+ pgpath = m->current_pgpath;
+
+ if (pgpath) {
+ bdev = pgpath->path.dev->bdev;
+ mode = pgpath->path.dev->mode;
}
- if (m->queue_io)
+ if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path))
r = -EAGAIN;
else if (!bdev)
r = -EIO;
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 2e227fb..f220a69 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1351,17 +1351,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
return q && blk_queue_nonrot(q);
}
-static bool dm_table_is_nonrot(struct dm_table *t)
+static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && !blk_queue_add_random(q);
+}
+
+static bool dm_table_all_devices_attribute(struct dm_table *t,
+ iterate_devices_callout_fn func)
{
struct dm_target *ti;
unsigned i = 0;
- /* Ensure that all underlying device are non-rotational. */
while (i < dm_table_get_num_targets(t)) {
ti = dm_table_get_target(t, i++);
if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+ !ti->type->iterate_devices(ti, func, NULL))
return 0;
}
@@ -1393,7 +1401,8 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
if (!dm_table_discard_zeroes_data(t))
q->limits.discard_zeroes_data = 0;
- if (dm_table_is_nonrot(t))
+ /* Ensure that all underlying devices are non-rotational. */
+ if (dm_table_all_devices_attribute(t, device_is_nonrot))
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
else
queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
@@ -1401,6 +1410,15 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
dm_table_set_integrity(t);
/*
+ * Determine whether or not this queue's I/O timings contribute
+ * to the entropy pool, Only request-based targets use this.
+ * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
+ * have it set.
+ */
+ if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+ queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
+
+ /*
* QUEUE_FLAG_STACKABLE must be set after all queue settings are
* visible to other CPUs because, once the flag is set, incoming bios
* are processed by request-based dm, which refers to the queue
diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c
index fa365d3..68bf5c3 100644
--- a/drivers/md/dm-verity.c
+++ b/drivers/md/dm-verity.c
@@ -718,8 +718,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
v->hash_dev_block_bits = ffs(num) - 1;
if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 ||
- num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) !=
- (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) {
+ (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT))
+ >> (v->data_dev_block_bits - SECTOR_SHIFT) != num_ll) {
ti->error = "Invalid data blocks";
r = -EINVAL;
goto bad;
@@ -733,8 +733,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
}
if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 ||
- num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) !=
- (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) {
+ (sector_t)(num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT))
+ >> (v->hash_dev_block_bits - SECTOR_SHIFT) != num_ll) {
ti->error = "Invalid hash start";
r = -EINVAL;
goto bad;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index e24143c..9ff3019 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -865,10 +865,14 @@ static void dm_done(struct request *clone, int error, bool mapped)
{
int r = error;
struct dm_rq_target_io *tio = clone->end_io_data;
- dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
+ dm_request_endio_fn rq_end_io = NULL;
- if (mapped && rq_end_io)
- r = rq_end_io(tio->ti, clone, error, &tio->info);
+ if (tio->ti) {
+ rq_end_io = tio->ti->type->rq_end_io;
+
+ if (mapped && rq_end_io)
+ r = rq_end_io(tio->ti, clone, error, &tio->info);
+ }
if (r <= 0)
/* The target wants to complete the I/O */
@@ -1566,15 +1570,6 @@ static int map_request(struct dm_target *ti, struct request *clone,
int r, requeued = 0;
struct dm_rq_target_io *tio = clone->end_io_data;
- /*
- * Hold the md reference here for the in-flight I/O.
- * We can't rely on the reference count by device opener,
- * because the device may be closed during the request completion
- * when all bios are completed.
- * See the comment in rq_completed() too.
- */
- dm_get(md);
-
tio->ti = ti;
r = ti->type->map_rq(ti, clone, &tio->info);
switch (r) {
@@ -1606,6 +1601,26 @@ static int map_request(struct dm_target *ti, struct request *clone,
return requeued;
}
+static struct request *dm_start_request(struct mapped_device *md, struct request *orig)
+{
+ struct request *clone;
+
+ blk_start_request(orig);
+ clone = orig->special;
+ atomic_inc(&md->pending[rq_data_dir(clone)]);
+
+ /*
+ * Hold the md reference here for the in-flight I/O.
+ * We can't rely on the reference count by device opener,
+ * because the device may be closed during the request completion
+ * when all bios are completed.
+ * See the comment in rq_completed() too.
+ */
+ dm_get(md);
+
+ return clone;
+}
+
/*
* q->request_fn for request-based dm.
* Called with the queue lock held.
@@ -1635,14 +1650,21 @@ static void dm_request_fn(struct request_queue *q)
pos = blk_rq_pos(rq);
ti = dm_table_find_target(map, pos);
- BUG_ON(!dm_target_is_valid(ti));
+ if (!dm_target_is_valid(ti)) {
+ /*
+ * Must perform setup, that dm_done() requires,
+ * before calling dm_kill_unmapped_request
+ */
+ DMERR_LIMIT("request attempted access beyond the end of device");
+ clone = dm_start_request(md, rq);
+ dm_kill_unmapped_request(clone, -EIO);
+ continue;
+ }
if (ti->type->busy && ti->type->busy(ti))
goto delay_and_out;
- blk_start_request(rq);
- clone = rq->special;
- atomic_inc(&md->pending[rq_data_dir(clone)]);
+ clone = dm_start_request(md, rq);
spin_unlock(q->queue_lock);
if (map_request(ti, clone, md))
@@ -1662,8 +1684,6 @@ delay_and_out:
blk_delay_queue(q, HZ / 10);
out:
dm_table_put(map);
-
- return;
}
int dm_underlying_device_busy(struct request_queue *q)
diff --git a/drivers/mtd/ubi/attach.c b/drivers/mtd/ubi/attach.c
index bd27cbb..68d4d1f 100644
--- a/drivers/mtd/ubi/attach.c
+++ b/drivers/mtd/ubi/attach.c
@@ -975,7 +975,7 @@ static int scan_peb(struct ubi_device *ubi, struct ubi_attach_info *ai,
return err;
goto adjust_mean_ec;
case UBI_IO_FF:
- if (ec_err)
+ if (ec_err || bitflips)
err = add_to_list(ai, pnum, UBI_UNKNOWN,
UBI_UNKNOWN, ec, 1, &ai->erase);
else
diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c
index 2c5ed5c..da052ed 100644
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -759,6 +759,11 @@ static int autoresize(struct ubi_device *ubi, int vol_id)
struct ubi_volume *vol = ubi->volumes[vol_id];
int err, old_reserved_pebs = vol->reserved_pebs;
+ if (ubi->ro_mode) {
+ ubi_warn("skip auto-resize because of R/O mode");
+ return 0;
+ }
+
/*
* Clear the auto-resize flag in the volume in-memory copy of the
* volume table, and 'ubi_resize_volume()' will propagate this change
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 5caa572..957f000 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -181,7 +181,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
if (!clock_name || !strcmp(clock_name, "sys")) {
sys_clk = clk_get(&ofdev->dev, "sys_clk");
- if (!sys_clk) {
+ if (IS_ERR(sys_clk)) {
dev_err(&ofdev->dev, "couldn't get sys_clk\n");
goto exit_unmap;
}
@@ -204,7 +204,7 @@ static u32 __devinit mpc512x_can_get_clock(struct platform_device *ofdev,
if (clocksrc < 0) {
ref_clk = clk_get(&ofdev->dev, "ref_clk");
- if (!ref_clk) {
+ if (IS_ERR(ref_clk)) {
dev_err(&ofdev->dev, "couldn't get ref_clk\n");
goto exit_unmap;
}
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 0a8dad6..5ea8565 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -124,8 +124,9 @@ static void ath_pci_aspm_init(struct ath_common *common)
if (!parent)
return;
- if (ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
- /* Bluetooth coexistance requires disabling ASPM. */
+ if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
+ (AR_SREV_9285(ah))) {
+ /* Bluetooth coexistance requires disabling ASPM for AR9285. */
pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &aspm);
aspm &= ~(PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
pci_write_config_byte(pdev, pos + PCI_EXP_LNKCTL, aspm);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index eae691e..de1d9d5 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3894,6 +3894,8 @@ static void b43legacy_remove(struct ssb_device *dev)
cancel_work_sync(&wl->firmware_load);
B43legacy_WARN_ON(!wl);
+ if (!wldev->fw.ucode)
+ return; /* NULL if fw never loaded */
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index f8d818a..811ff72 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -5,6 +5,7 @@ config REMOTEPROC
tristate
depends on EXPERIMENTAL
select FW_CONFIG
+ select VIRTIO
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 66324ee..99b6ee7 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -643,17 +643,10 @@ static int rproc_handle_carveout(struct rproc *rproc,
dev_dbg(dev, "carveout rsc: da %x, pa %x, len %x, flags %x\n",
rsc->da, rsc->pa, rsc->len, rsc->flags);
- mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
- if (!mapping) {
- dev_err(dev, "kzalloc mapping failed\n");
- return -ENOMEM;
- }
-
carveout = kzalloc(sizeof(*carveout), GFP_KERNEL);
if (!carveout) {
dev_err(dev, "kzalloc carveout failed\n");
- ret = -ENOMEM;
- goto free_mapping;
+ return -ENOMEM;
}
va = dma_alloc_coherent(dev, rsc->len, &dma, GFP_KERNEL);
@@ -683,11 +676,18 @@ static int rproc_handle_carveout(struct rproc *rproc,
* physical address in this case.
*/
if (rproc->domain) {
+ mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
+ if (!mapping) {
+ dev_err(dev, "kzalloc mapping failed\n");
+ ret = -ENOMEM;
+ goto dma_free;
+ }
+
ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
rsc->flags);
if (ret) {
dev_err(dev, "iommu_map failed: %d\n", ret);
- goto dma_free;
+ goto free_mapping;
}
/*
@@ -728,12 +728,12 @@ static int rproc_handle_carveout(struct rproc *rproc,
return 0;
+free_mapping:
+ kfree(mapping);
dma_free:
dma_free_coherent(dev, rsc->len, va, dma);
free_carv:
kfree(carveout);
-free_mapping:
- kfree(mapping);
return ret;
}
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index fda9cde..78c79cb 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -590,8 +590,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
h->state = TPGS_STATE_STANDBY;
break;
case TPGS_STATE_OFFLINE:
- case TPGS_STATE_UNAVAILABLE:
- /* Path unusable for unavailable/offline */
+ /* Path unusable */
err = SCSI_DH_DEV_OFFLINED;
break;
default:
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 2b4261c..f9823f2 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3266,7 +3266,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.Timeout = 0; /* Don't time out */
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd;
- c->Request.CDB[1] = 0x03; /* Reset target above */
+ c->Request.CDB[1] = HPSA_RESET_TYPE_LUN;
/* If bytes 4-7 are zero, it means reset the */
/* LunID device */
c->Request.CDB[4] = 0x00;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 3a6c474..337e8b3 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1541,6 +1541,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
host_config = &evt_struct->iu.mad.host_config;
+ /* The transport length field is only 16-bit */
+ length = min(0xffff, length);
+
/* Set up a lun reset SRP command */
memset(host_config, 0x00, sizeof(*host_config));
host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 47e28b5..8870bd3 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -641,7 +641,6 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic
orom->hdr.version)) {
dev_warn(&pdev->dev,
"[%d]: invalid oem parameters detected, falling back to firmware\n", i);
- devm_kfree(&pdev->dev, orom);
orom = NULL;
break;
}
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index 4d95654..8ac646e 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -104,7 +104,6 @@ struct isci_orom *isci_request_oprom(struct pci_dev *pdev)
if (i >= len) {
dev_err(&pdev->dev, "oprom parse error\n");
- devm_kfree(&pdev->dev, rom);
rom = NULL;
}
pci_unmap_biosrom(oprom);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index bb7c482..08d48a3 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1023,33 +1023,31 @@ static void __scsi_remove_target(struct scsi_target *starget)
void scsi_remove_target(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev->parent);
- struct scsi_target *starget, *found;
+ struct scsi_target *starget, *last = NULL;
unsigned long flags;
- restart:
- found = NULL;
+ /* remove targets being careful to lookup next entry before
+ * deleting the last
+ */
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
- found = starget;
- found->reap_ref++;
- break;
+ /* assuming new targets arrive at the end */
+ starget->reap_ref++;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ if (last)
+ scsi_target_reap(last);
+ last = starget;
+ __scsi_remove_target(starget);
+ spin_lock_irqsave(shost->host_lock, flags);
}
}
spin_unlock_irqrestore(shost->host_lock, flags);
- if (found) {
- __scsi_remove_target(found);
- scsi_target_reap(found);
- /* in the case where @dev has multiple starget children,
- * continue removing.
- *
- * FIXME: does such a case exist?
- */
- goto restart;
- }
+ if (last)
+ scsi_target_reap(last);
}
EXPORT_SYMBOL(scsi_remove_target);
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index 7677657..d77219a 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1132,7 +1132,7 @@ static int parse_insn(struct comedi_device *dev, struct comedi_insn *insn,
ret = -EAGAIN;
break;
}
- ret = s->async->inttrig(dev, s, insn->data[0]);
+ ret = s->async->inttrig(dev, s, data[0]);
if (ret >= 0)
ret = 1;
break;
@@ -1377,7 +1377,6 @@ static int do_cmd_ioctl(struct comedi_device *dev,
goto cleanup;
}
- kfree(async->cmd.chanlist);
async->cmd = user_cmd;
async->cmd.data = NULL;
/* load channel/gain list */
@@ -2122,6 +2121,8 @@ void do_become_nonbusy(struct comedi_device *dev, struct comedi_subdevice *s)
if (async) {
comedi_reset_async_buf(async);
async->inttrig = NULL;
+ kfree(async->cmd.chanlist);
+ async->cmd.chanlist = NULL;
} else {
printk(KERN_ERR
"BUG: (?) do_become_nonbusy called with async=0\n");
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index d536a11..cf523e5 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -883,7 +883,7 @@ static int jr3_pci_attach(struct comedi_device *dev,
}
/* Reset DSP card */
- devpriv->iobase->channel[0].reset = 0;
+ writel(0, &devpriv->iobase->channel[0].reset);
result = comedi_load_firmware(dev, "jr3pci.idm", jr3_download_firmware);
dev_dbg(dev->hw_dev, "Firmare load %d\n", result);
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 7beb8f6..e68e474 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -2311,7 +2311,7 @@ static int s626_enc_insn_config(struct comedi_device *dev,
/* (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
k->SetMode(dev, k, Setup, TRUE);
- Preload(dev, k, *(insn->data));
+ Preload(dev, k, data[0]);
k->PulseIndex(dev, k);
SetLatchSource(dev, k, valueSrclatch);
k->SetEnable(dev, k, (uint16_t) (enab != 0));
diff --git a/drivers/staging/rtl8712/rtl8712_recv.c b/drivers/staging/rtl8712/rtl8712_recv.c
index 8e82ce2..88e3ca6 100644
--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -1127,6 +1127,9 @@ static void recv_tasklet(void *priv)
recvbuf2recvframe(padapter, pskb);
skb_reset_tail_pointer(pskb);
pskb->len = 0;
- skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+ if (!skb_cloned(pskb))
+ skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+ else
+ consume_skb(pskb);
}
}
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index 42cdafe..b5130c8 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -40,7 +40,7 @@ static int softsynth_is_alive(struct spk_synth *synth);
static unsigned char get_index(void);
static struct miscdevice synth_device;
-static int initialized;
+static int init_pos;
static int misc_registered;
static struct var_t vars[] = {
@@ -194,7 +194,7 @@ static int softsynth_close(struct inode *inode, struct file *fp)
unsigned long flags;
spk_lock(flags);
synth_soft.alive = 0;
- initialized = 0;
+ init_pos = 0;
spk_unlock(flags);
/* Make sure we let applications go before leaving */
speakup_start_ttys();
@@ -239,13 +239,8 @@ static ssize_t softsynth_read(struct file *fp, char *buf, size_t count,
ch = '\x18';
} else if (synth_buffer_empty()) {
break;
- } else if (!initialized) {
- if (*init) {
- ch = *init;
- init++;
- } else {
- initialized = 1;
- }
+ } else if (init[init_pos]) {
+ ch = init[init_pos++];
} else {
ch = synth_buffer_getc();
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index c43b683..90dff82 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -875,7 +875,7 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
/* dlci->skb is locked by tx_lock */
if (dlci->skb == NULL) {
- dlci->skb = skb_dequeue(&dlci->skb_list);
+ dlci->skb = skb_dequeue_tail(&dlci->skb_list);
if (dlci->skb == NULL)
return 0;
first = 1;
@@ -899,8 +899,11 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
/* FIXME: need a timer or something to kick this so it can't
get stuck with no work outstanding and no buffer free */
- if (msg == NULL)
+ if (msg == NULL) {
+ skb_queue_tail(&dlci->skb_list, dlci->skb);
+ dlci->skb = NULL;
return -ENOMEM;
+ }
dp = msg->data;
if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
@@ -971,16 +974,19 @@ static void gsm_dlci_data_sweep(struct gsm_mux *gsm)
static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
{
unsigned long flags;
+ int sweep;
spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
/* If we have nothing running then we need to fire up */
+ sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
if (dlci->gsm->tx_bytes == 0) {
if (dlci->net)
gsm_dlci_data_output_framed(dlci->gsm, dlci);
else
gsm_dlci_data_output(dlci->gsm, dlci);
- } else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
- gsm_dlci_data_sweep(dlci->gsm);
+ }
+ if (sweep)
+ gsm_dlci_data_sweep(dlci->gsm);
spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
}
@@ -1190,6 +1196,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
u8 *data, int clen)
{
u8 buf[1];
+ unsigned long flags;
+
switch (command) {
case CMD_CLD: {
struct gsm_dlci *dlci = gsm->dlci[0];
@@ -1215,7 +1223,9 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
gsm->constipated = 0;
gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
/* Kick the link in case it is idling */
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
break;
case CMD_MSC:
/* Out of band modem line change indicator for a DLCI */
@@ -2377,12 +2387,12 @@ static void gsmld_write_wakeup(struct tty_struct *tty)
/* Queue poll */
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+ spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_data_kick(gsm);
if (gsm->tx_bytes < TX_THRESH_LO) {
- spin_lock_irqsave(&gsm->tx_lock, flags);
gsm_dlci_data_sweep(gsm);
- spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
+ spin_unlock_irqrestore(&gsm->tx_lock, flags);
}
/**
@@ -2889,6 +2899,10 @@ static int gsmtty_open(struct tty_struct *tty, struct file *filp)
gsm = gsm_mux[mux];
if (gsm->dead)
return -EL2HLT;
+ /* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+ perspective as we don't have to worry about this if DLCI0 is lost */
+ if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+ return -EL2NSYNC;
dlci = gsm->dlci[line];
if (dlci == NULL)
dlci = gsm_dlci_alloc(gsm, line);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index ee1c268..26f0d0e 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1728,7 +1728,8 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
do_it_again:
- BUG_ON(!tty->read_buf);
+ if (WARN_ON(!tty->read_buf))
+ return -EAGAIN;
c = job_control(tty, file);
if (c < 0)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 28e7c7c..6b8fcb4 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1164,6 +1164,8 @@ pci_xr17c154_setup(struct serial_private *priv,
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
@@ -3232,8 +3234,11 @@ static struct pci_device_id serial_pci_tbl[] = {
* For now just used the hex ID 0x950a.
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
- pbn_b0_2_115200 },
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+ 0, 0, pbn_b0_2_115200 },
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+ 0, 0, pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c17923e..da8a37f 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1603,13 +1603,26 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
old_cr &= ~ST_UART011_CR_OVSFACT;
}
+ /*
+ * Workaround for the ST Micro oversampling variants to
+ * increase the bitrate slightly, by lowering the divisor,
+ * to avoid delayed sampling of start bit at high speeds,
+ * else we see data corruption.
+ */
+ if (uap->vendor->oversampling) {
+ if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+ quot -= 1;
+ else if ((baud > 3250000) && (quot > 2))
+ quot -= 2;
+ }
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
/*
* ----------v----------v----------v----------v-----
- * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
+ * UART011_FBRD & UART011_IBRD.
* ----------^----------^----------^----------^-----
*/
writew(lcr_h, port->membase + uap->lcrh_rx);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0c..22992cd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -667,19 +667,19 @@ serial_omap_configure_xonxoff
/*
* IXON Flag:
- * Enable XON/XOFF flow control on output.
- * Transmit XON1, XOFF1
+ * Flow control for OMAP.TX
+ * OMAP.RX should listen for XON/XOFF
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * Flow control for OMAP.RX
+ * OMAP.TX should send XON/XOFF
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 48cc6f2..770a854 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1049,13 +1049,10 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data)
*/
int vt_get_leds(int console, int flag)
{
- unsigned long flags;
struct kbd_struct * kbd = kbd_table + console;
int ret;
- spin_lock_irqsave(&kbd_event_lock, flags);
ret = vc_kbd_led(kbd, flag);
- spin_unlock_irqrestore(&kbd_event_lock, flags);
return ret;
}
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index f1f9290..7587615 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -141,18 +141,14 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
* descriptors are built on demand.
*/
-#define STRING_MANUFACTURER 1
-#define STRING_PRODUCT 2
-#define STRING_SERIALNUM 3
+#define STRING_MANUFACTURER 0
+#define STRING_PRODUCT 1
+#define STRING_SERIALNUM 2
/* holds our biggest descriptor */
#define USB_DESC_BUFSIZE 256
#define USB_BUFSIZE 8192
-/* This device advertises one configuration. */
-#define DEV_CONFIG_VALUE 1
-#define PRINTER_INTERFACE 0
-
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -162,16 +158,12 @@ static struct usb_device_descriptor device_desc = {
.bDeviceProtocol = 0,
.idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
.idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIALNUM,
.bNumConfigurations = 1
};
static struct usb_interface_descriptor intf_desc = {
.bLength = sizeof intf_desc,
.bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = PRINTER_INTERFACE,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_PRINTER,
.bInterfaceSubClass = 1, /* Printer Sub-Class */
@@ -260,9 +252,9 @@ static char pnp_string [1024] =
/* static strings, in UTF-8 */
static struct usb_string strings [] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, product_desc, },
- { STRING_SERIALNUM, serial_num, },
+ [STRING_MANUFACTURER].s = manufacturer,
+ [STRING_PRODUCT].s = product_desc,
+ [STRING_SERIALNUM].s = serial_num,
{ } /* end of list */
};
@@ -871,25 +863,13 @@ static int set_interface(struct printer_dev *dev, unsigned number)
int result = 0;
/* Free the current interface */
- switch (dev->interface) {
- case PRINTER_INTERFACE:
- printer_reset_interface(dev);
- break;
- }
+ printer_reset_interface(dev);
- switch (number) {
- case PRINTER_INTERFACE:
- result = set_printer_interface(dev);
- if (result) {
- printer_reset_interface(dev);
- } else {
- dev->interface = PRINTER_INTERFACE;
- }
- break;
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- }
+ result = set_printer_interface(dev);
+ if (result)
+ printer_reset_interface(dev);
+ else
+ dev->interface = number;
if (!result)
INFO(dev, "Using interface %x\n", number);
@@ -972,7 +952,7 @@ static int printer_func_setup(struct usb_function *f,
switch (ctrl->bRequest) {
case 0: /* Get the IEEE-1284 PNP String */
/* Only one printer interface is supported. */
- if ((wIndex>>8) != PRINTER_INTERFACE)
+ if ((wIndex>>8) != dev->interface)
break;
value = (pnp_string[0]<<8)|pnp_string[1];
@@ -983,7 +963,7 @@ static int printer_func_setup(struct usb_function *f,
case 1: /* Get Port Status */
/* Only one printer interface is supported. */
- if (wIndex != PRINTER_INTERFACE)
+ if (wIndex != dev->interface)
break;
*(u8 *)req->buf = dev->printer_status;
@@ -992,7 +972,7 @@ static int printer_func_setup(struct usb_function *f,
case 2: /* Soft Reset */
/* Only one printer interface is supported. */
- if (wIndex != PRINTER_INTERFACE)
+ if (wIndex != dev->interface)
break;
printer_soft_reset(dev);
@@ -1020,6 +1000,37 @@ unknown:
static int __init printer_func_bind(struct usb_configuration *c,
struct usb_function *f)
{
+ struct printer_dev *dev = container_of(f, struct printer_dev, function);
+ struct usb_composite_dev *cdev = c->cdev;
+ struct usb_ep *in_ep, *out_ep;
+ int id;
+
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ intf_desc.bInterfaceNumber = id;
+
+ /* all we really need is bulk IN/OUT */
+ in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+ if (!in_ep) {
+autoconf_fail:
+ dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+ cdev->gadget->name);
+ return -ENODEV;
+ }
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+ if (!out_ep)
+ goto autoconf_fail;
+ out_ep->driver_data = out_ep; /* claim */
+
+ /* assumes that all endpoints are dual-speed */
+ hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+ hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
return 0;
}
@@ -1035,7 +1046,8 @@ static int printer_func_set_alt(struct usb_function *f,
int ret = -ENOTSUPP;
if (!alt)
- ret = set_interface(dev, PRINTER_INTERFACE);
+ ret = set_interface(dev, intf);
+
return ret;
}
@@ -1107,13 +1119,14 @@ static int __init printer_bind_config(struct usb_configuration *c)
{
struct usb_gadget *gadget = c->cdev->gadget;
struct printer_dev *dev;
- struct usb_ep *in_ep, *out_ep;
int status = -ENOMEM;
int gcnum;
size_t len;
u32 i;
struct usb_request *req;
+ usb_ep_autoconfig_reset(gadget);
+
dev = &usb_printer_gadget;
dev->function.name = shortname;
@@ -1125,6 +1138,10 @@ static int __init printer_bind_config(struct usb_configuration *c)
dev->function.set_alt = printer_func_set_alt;
dev->function.disable = printer_func_disable;
+ status = usb_add_function(c, &dev->function);
+ if (status)
+ return status;
+
/* Setup the sysfs files for the printer gadget. */
dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
NULL, "g_printer");
@@ -1169,26 +1186,6 @@ static int __init printer_bind_config(struct usb_configuration *c)
pnp_string[0] = (len >> 8) & 0xFF;
pnp_string[1] = len & 0xFF;
- /* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset(gadget);
- in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
- if (!in_ep) {
-autoconf_fail:
- dev_err(&gadget->dev, "can't autoconfigure on %s\n",
- gadget->name);
- return -ENODEV;
- }
- in_ep->driver_data = in_ep; /* claim */
-
- out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
- if (!out_ep)
- goto autoconf_fail;
- out_ep->driver_data = out_ep; /* claim */
-
- /* assumes that all endpoints are dual-speed */
- hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
- hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
usb_gadget_set_selfpowered(gadget);
if (gadget->is_otg) {
@@ -1215,9 +1212,6 @@ autoconf_fail:
dev->current_rx_bytes = 0;
dev->current_rx_buf = NULL;
- dev->in_ep = in_ep;
- dev->out_ep = out_ep;
-
for (i = 0; i < QLEN; i++) {
req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
if (!req) {
@@ -1250,8 +1244,6 @@ autoconf_fail:
dev->gadget = gadget;
INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
- INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
- in_ep->name);
return 0;
fail:
@@ -1266,7 +1258,17 @@ static int printer_unbind(struct usb_composite_dev *cdev)
static int __init printer_bind(struct usb_composite_dev *cdev)
{
- return usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+ int ret;
+
+ ret = usb_string_ids_tab(cdev, strings);
+ if (ret < 0)
+ return ret;
+ device_desc.iManufacturer = strings[STRING_MANUFACTURER].id;
+ device_desc.iProduct = strings[STRING_PRODUCT].id;
+ device_desc.iSerialNumber = strings[STRING_SERIALNUM].id;
+
+ ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
+ return ret;
}
static struct usb_composite_driver printer_driver = {
diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c
index c46439c..cdfbac7 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/tcm_usb_gadget.c
@@ -1983,7 +1983,6 @@ static struct usb_interface_descriptor bot_intf_desc = {
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = USB_SC_SCSI,
.bInterfaceProtocol = USB_PR_BULK,
- .iInterface = USB_G_STR_INT_UAS,
};
static struct usb_interface_descriptor uasp_intf_desc = {
@@ -1994,7 +1993,6 @@ static struct usb_interface_descriptor uasp_intf_desc = {
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
.bInterfaceSubClass = USB_SC_SCSI,
.bInterfaceProtocol = USB_PR_UAS,
- .iInterface = USB_G_STR_INT_BBB,
};
static struct usb_endpoint_descriptor uasp_bi_desc = {
@@ -2215,20 +2213,16 @@ static struct usb_device_descriptor usbg_device_desc = {
.bDeviceClass = USB_CLASS_PER_INTERFACE,
.idVendor = cpu_to_le16(UAS_VENDOR_ID),
.idProduct = cpu_to_le16(UAS_PRODUCT_ID),
- .iManufacturer = USB_G_STR_MANUFACTOR,
- .iProduct = USB_G_STR_PRODUCT,
- .iSerialNumber = USB_G_STR_SERIAL,
-
.bNumConfigurations = 1,
};
static struct usb_string usbg_us_strings[] = {
- { USB_G_STR_MANUFACTOR, "Target Manufactor"},
- { USB_G_STR_PRODUCT, "Target Product"},
- { USB_G_STR_SERIAL, "000000000001"},
- { USB_G_STR_CONFIG, "default config"},
- { USB_G_STR_INT_UAS, "USB Attached SCSI"},
- { USB_G_STR_INT_BBB, "Bulk Only Transport"},
+ [USB_G_STR_MANUFACTOR].s = "Target Manufactor",
+ [USB_G_STR_PRODUCT].s = "Target Product",
+ [USB_G_STR_SERIAL].s = "000000000001",
+ [USB_G_STR_CONFIG].s = "default config",
+ [USB_G_STR_INT_UAS].s = "USB Attached SCSI",
+ [USB_G_STR_INT_BBB].s = "Bulk Only Transport",
{ },
};
@@ -2250,7 +2244,6 @@ static int guas_unbind(struct usb_composite_dev *cdev)
static struct usb_configuration usbg_config_driver = {
.label = "Linux Target",
.bConfigurationValue = 1,
- .iConfiguration = USB_G_STR_CONFIG,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
@@ -2423,6 +2416,9 @@ static int usbg_cfg_bind(struct usb_configuration *c)
fu->function.disable = usbg_disable;
fu->tpg = the_only_tpg_I_currently_have;
+ bot_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_BBB].id;
+ uasp_intf_desc.iInterface = usbg_us_strings[USB_G_STR_INT_UAS].id;
+
ret = usb_add_function(c, &fu->function);
if (ret)
goto err;
@@ -2437,6 +2433,17 @@ static int usb_target_bind(struct usb_composite_dev *cdev)
{
int ret;
+ ret = usb_string_ids_tab(cdev, usbg_us_strings);
+ if (ret)
+ return ret;
+
+ usbg_device_desc.iManufacturer =
+ usbg_us_strings[USB_G_STR_MANUFACTOR].id;
+ usbg_device_desc.iProduct = usbg_us_strings[USB_G_STR_PRODUCT].id;
+ usbg_device_desc.iSerialNumber = usbg_us_strings[USB_G_STR_SERIAL].id;
+ usbg_config_driver.iConfiguration =
+ usbg_us_strings[USB_G_STR_CONFIG].id;
+
ret = usb_add_config(cdev, &usbg_config_driver,
usbg_cfg_bind);
return 0;
diff --git a/drivers/usb/gadget/tcm_usb_gadget.h b/drivers/usb/gadget/tcm_usb_gadget.h
index bb18999..9d32ec3 100644
--- a/drivers/usb/gadget/tcm_usb_gadget.h
+++ b/drivers/usb/gadget/tcm_usb_gadget.h
@@ -16,12 +16,14 @@
#define UASP_SS_EP_COMP_LOG_STREAMS 4
#define UASP_SS_EP_COMP_NUM_STREAMS (1 << UASP_SS_EP_COMP_LOG_STREAMS)
-#define USB_G_STR_MANUFACTOR 1
-#define USB_G_STR_PRODUCT 2
-#define USB_G_STR_SERIAL 3
-#define USB_G_STR_CONFIG 4
-#define USB_G_STR_INT_UAS 5
-#define USB_G_STR_INT_BBB 6
+enum {
+ USB_G_STR_MANUFACTOR,
+ USB_G_STR_PRODUCT,
+ USB_G_STR_SERIAL,
+ USB_G_STR_CONFIG,
+ USB_G_STR_INT_UAS,
+ USB_G_STR_INT_BBB,
+};
#define USB_G_ALT_INT_BBB 0
#define USB_G_ALT_INT_UAS 1
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 77689bd..487bc08 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1772,6 +1772,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
struct dev_info *dev_info, *next;
+ struct xhci_cd *cur_cd, *next_cd;
unsigned long flags;
int size;
int i, j, num_ports;
@@ -1795,6 +1796,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci_dbg(xhci, "Freed command ring\n");
+ list_for_each_entry_safe(cur_cd, next_cd,
+ &xhci->cancel_cmd_list, cancel_cmd_list) {
+ list_del(&cur_cd->cancel_cmd_list);
+ kfree(cur_cd);
+ }
for (i = 1; i < MAX_HC_SLOTS; ++i)
xhci_free_virt_device(xhci, i);
@@ -2340,6 +2346,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 9bfd4ca11..8345d7c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -103,6 +103,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
* PPT chipsets.
*/
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+ xhci->quirks |= XHCI_AVOID_BEI;
}
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6ec3633..47b6bb6 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,12 +280,123 @@ static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
+ if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
+ return;
+
xhci_dbg(xhci, "// Ding dong!\n");
xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
/* Flush PCI posted writes */
xhci_readl(xhci, &xhci->dba->doorbell[0]);
}
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+{
+ u64 temp_64;
+ int ret;
+
+ xhci_dbg(xhci, "Abort command ring\n");
+
+ if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) {
+ xhci_dbg(xhci, "The command ring isn't running, "
+ "Have the command ring been stopped?\n");
+ return 0;
+ }
+
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ if (!(temp_64 & CMD_RING_RUNNING)) {
+ xhci_dbg(xhci, "Command ring had been stopped\n");
+ return 0;
+ }
+ xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
+
+ /* Section 4.6.1.2 of xHCI 1.0 spec says software should
+ * time the completion od all xHCI commands, including
+ * the Command Abort operation. If software doesn't see
+ * CRR negated in a timely manner (e.g. longer than 5
+ * seconds), then it should assume that the there are
+ * larger problems with the xHC and assert HCRST.
+ */
+ ret = handshake(xhci, &xhci->op_regs->cmd_ring,
+ CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
+ if (ret < 0) {
+ xhci_err(xhci, "Stopped the command ring failed, "
+ "maybe the host is dead\n");
+ xhci->xhc_state |= XHCI_STATE_DYING;
+ xhci_quiesce(xhci);
+ xhci_halt(xhci);
+ return -ESHUTDOWN;
+ }
+
+ return 0;
+}
+
+static int xhci_queue_cd(struct xhci_hcd *xhci,
+ struct xhci_command *command,
+ union xhci_trb *cmd_trb)
+{
+ struct xhci_cd *cd;
+ cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC);
+ if (!cd)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&cd->cancel_cmd_list);
+
+ cd->command = command;
+ cd->cmd_trb = cmd_trb;
+ list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list);
+
+ return 0;
+}
+
+/*
+ * Cancel the command which has issue.
+ *
+ * Some commands may hang due to waiting for acknowledgement from
+ * usb device. It is outside of the xHC's ability to control and
+ * will cause the command ring is blocked. When it occurs software
+ * should intervene to recover the command ring.
+ * See Section 4.6.1.1 and 4.6.1.2
+ */
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+ union xhci_trb *cmd_trb)
+{
+ int retval = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ if (xhci->xhc_state & XHCI_STATE_DYING) {
+ xhci_warn(xhci, "Abort the command ring,"
+ " but the xHCI is dead.\n");
+ retval = -ESHUTDOWN;
+ goto fail;
+ }
+
+ /* queue the cmd desriptor to cancel_cmd_list */
+ retval = xhci_queue_cd(xhci, command, cmd_trb);
+ if (retval) {
+ xhci_warn(xhci, "Queuing command descriptor failed.\n");
+ goto fail;
+ }
+
+ /* abort command ring */
+ retval = xhci_abort_cmd_ring(xhci);
+ if (retval) {
+ xhci_err(xhci, "Abort command ring failed\n");
+ if (unlikely(retval == -ESHUTDOWN)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
+ xhci_dbg(xhci, "xHCI host controller is dead.\n");
+ return retval;
+ }
+ }
+
+fail:
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return retval;
+}
+
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index,
@@ -1059,6 +1170,20 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
}
}
+/* Complete the command and detele it from the devcie's command queue.
+ */
+static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
+ struct xhci_command *command, u32 status)
+{
+ command->status = status;
+ list_del(&command->cmd_list);
+ if (command->completion)
+ complete(command->completion);
+ else
+ xhci_free_command(xhci, command);
+}
+
+
/* Check to see if a command in the device's command queue matches this one.
* Signal the completion or free the command, and return 1. Return 0 if the
* completed command isn't at the head of the command list.
@@ -1077,15 +1202,144 @@ static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
if (xhci->cmd_ring->dequeue != command->command_trb)
return 0;
- command->status = GET_COMP_CODE(le32_to_cpu(event->status));
- list_del(&command->cmd_list);
- if (command->completion)
- complete(command->completion);
- else
- xhci_free_command(xhci, command);
+ xhci_complete_cmd_in_cmd_wait_list(xhci, command,
+ GET_COMP_CODE(le32_to_cpu(event->status)));
return 1;
}
+/*
+ * Finding the command trb need to be cancelled and modifying it to
+ * NO OP command. And if the command is in device's command wait
+ * list, finishing and freeing it.
+ *
+ * If we can't find the command trb, we think it had already been
+ * executed.
+ */
+static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
+{
+ struct xhci_segment *cur_seg;
+ union xhci_trb *cmd_trb;
+ u32 cycle_state;
+
+ if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
+ return;
+
+ /* find the current segment of command ring */
+ cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
+ xhci->cmd_ring->dequeue, &cycle_state);
+
+ /* find the command trb matched by cd from command ring */
+ for (cmd_trb = xhci->cmd_ring->dequeue;
+ cmd_trb != xhci->cmd_ring->enqueue;
+ next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) {
+ /* If the trb is link trb, continue */
+ if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3]))
+ continue;
+
+ if (cur_cd->cmd_trb == cmd_trb) {
+
+ /* If the command in device's command list, we should
+ * finish it and free the command structure.
+ */
+ if (cur_cd->command)
+ xhci_complete_cmd_in_cmd_wait_list(xhci,
+ cur_cd->command, COMP_CMD_STOP);
+
+ /* get cycle state from the origin command trb */
+ cycle_state = le32_to_cpu(cmd_trb->generic.field[3])
+ & TRB_CYCLE;
+
+ /* modify the command trb to NO OP command */
+ cmd_trb->generic.field[0] = 0;
+ cmd_trb->generic.field[1] = 0;
+ cmd_trb->generic.field[2] = 0;
+ cmd_trb->generic.field[3] = cpu_to_le32(
+ TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+ break;
+ }
+ }
+}
+
+static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci)
+{
+ struct xhci_cd *cur_cd, *next_cd;
+
+ if (list_empty(&xhci->cancel_cmd_list))
+ return;
+
+ list_for_each_entry_safe(cur_cd, next_cd,
+ &xhci->cancel_cmd_list, cancel_cmd_list) {
+ xhci_cmd_to_noop(xhci, cur_cd);
+ list_del(&cur_cd->cancel_cmd_list);
+ kfree(cur_cd);
+ }
+}
+
+/*
+ * traversing the cancel_cmd_list. If the command descriptor according
+ * to cmd_trb is found, the function free it and return 1, otherwise
+ * return 0.
+ */
+static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci,
+ union xhci_trb *cmd_trb)
+{
+ struct xhci_cd *cur_cd, *next_cd;
+
+ if (list_empty(&xhci->cancel_cmd_list))
+ return 0;
+
+ list_for_each_entry_safe(cur_cd, next_cd,
+ &xhci->cancel_cmd_list, cancel_cmd_list) {
+ if (cur_cd->cmd_trb == cmd_trb) {
+ if (cur_cd->command)
+ xhci_complete_cmd_in_cmd_wait_list(xhci,
+ cur_cd->command, COMP_CMD_STOP);
+ list_del(&cur_cd->cancel_cmd_list);
+ kfree(cur_cd);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
+ * trb pointed by the command ring dequeue pointer is the trb we want to
+ * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
+ * traverse the cancel_cmd_list to trun the all of the commands according
+ * to command descriptor to NO-OP trb.
+ */
+static int handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+ int cmd_trb_comp_code)
+{
+ int cur_trb_is_good = 0;
+
+ /* Searching the cmd trb pointed by the command ring dequeue
+ * pointer in command descriptor list. If it is found, free it.
+ */
+ cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci,
+ xhci->cmd_ring->dequeue);
+
+ if (cmd_trb_comp_code == COMP_CMD_ABORT)
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+ else if (cmd_trb_comp_code == COMP_CMD_STOP) {
+ /* traversing the cancel_cmd_list and canceling
+ * the command according to command descriptor
+ */
+ xhci_cancel_cmd_in_cd_list(xhci);
+
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+ /*
+ * ring command ring doorbell again to restart the
+ * command ring
+ */
+ if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue)
+ xhci_ring_cmd_db(xhci);
+ }
+ return cur_trb_is_good;
+}
+
static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
{
@@ -1111,6 +1365,22 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci->error_bitmask |= 1 << 5;
return;
}
+
+ if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) ||
+ (GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) {
+ /* If the return value is 0, we think the trb pointed by
+ * command ring dequeue pointer is a good trb. The good
+ * trb means we don't want to cancel the trb, but it have
+ * been stopped by host. So we should handle it normally.
+ * Otherwise, driver should invoke inc_deq() and return.
+ */
+ if (handle_stopped_cmd_ring(xhci,
+ GET_COMP_CODE(le32_to_cpu(event->status)))) {
+ inc_deq(xhci, xhci->cmd_ring);
+ return;
+ }
+ }
+
switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
& TRB_TYPE_BITMASK) {
case TRB_TYPE(TRB_ENABLE_SLOT):
@@ -3400,7 +3670,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
- if (xhci->hci_version == 0x100) {
+ if (xhci->hci_version == 0x100 &&
+ !(xhci->quirks &
+ XHCI_AVOID_BEI)) {
/* Set BEI bit except for the last td */
if (i < num_tds - 1)
field |= TRB_BEI;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45f0b65..db4a2fa 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB");
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*/
-static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
@@ -105,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci)
ret = handshake(xhci, &xhci->op_regs->status,
STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
- if (!ret)
+ if (!ret) {
xhci->xhc_state |= XHCI_STATE_HALTED;
- else
+ xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+ } else
xhci_warn(xhci, "Host not halted after %u microseconds.\n",
XHCI_MAX_HALT_USEC);
return ret;
@@ -470,6 +471,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void)
dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!dmi_product_name || !dmi_sys_vendor)
+ return false;
if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
return false;
@@ -581,6 +584,7 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
return -ENODEV;
}
xhci->shared_hcd->state = HC_STATE_RUNNING;
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
if (xhci->quirks & XHCI_NEC_HOST)
xhci_ring_cmd_db(xhci);
@@ -886,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
- STS_HALT, STS_HALT, 100*100)) {
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
@@ -2521,6 +2525,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
struct completion *cmd_completion;
u32 *cmd_status;
struct xhci_virt_device *virt_dev;
+ union xhci_trb *cmd_trb;
spin_lock_irqsave(&xhci->lock, flags);
virt_dev = xhci->devs[udev->slot_id];
@@ -2566,6 +2571,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
}
init_completion(cmd_completion);
+ cmd_trb = xhci->cmd_ring->dequeue;
if (!ctx_change)
ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
udev->slot_id, must_succeed);
@@ -2587,14 +2593,17 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
/* Wait for the configure endpoint command to complete */
timeleft = wait_for_completion_interruptible_timeout(
cmd_completion,
- USB_CTRL_SET_TIMEOUT);
+ XHCI_CMD_DEFAULT_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for %s command\n",
timeleft == 0 ? "Timeout" : "Signal",
ctx_change == 0 ?
"configure endpoint" :
"evaluate context");
- /* FIXME cancel the configure endpoint command */
+ /* cancel the configure endpoint command */
+ ret = xhci_cancel_cmd(xhci, command, cmd_trb);
+ if (ret < 0)
+ return ret;
return -ETIME;
}
@@ -3543,8 +3552,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
unsigned long flags;
int timeleft;
int ret;
+ union xhci_trb *cmd_trb;
spin_lock_irqsave(&xhci->lock, flags);
+ cmd_trb = xhci->cmd_ring->dequeue;
ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3556,12 +3567,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
/* XXX: how much time for xHC slot assignment? */
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
- USB_CTRL_SET_TIMEOUT);
+ XHCI_CMD_DEFAULT_TIMEOUT);
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for a slot\n",
timeleft == 0 ? "Timeout" : "Signal");
- /* FIXME cancel the enable slot request */
- return 0;
+ /* cancel the enable slot request */
+ return xhci_cancel_cmd(xhci, NULL, cmd_trb);
}
if (!xhci->slot_id) {
@@ -3622,6 +3633,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u64 temp_64;
+ union xhci_trb *cmd_trb;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -3660,6 +3672,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
+ cmd_trb = xhci->cmd_ring->dequeue;
ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret) {
@@ -3672,7 +3685,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
- USB_CTRL_SET_TIMEOUT);
+ XHCI_CMD_DEFAULT_TIMEOUT);
/* FIXME: From section 4.3.4: "Software shall be responsible for timing
* the SetAddress() "recovery interval" required by USB and aborting the
* command on a timeout.
@@ -3680,7 +3693,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
if (timeleft <= 0) {
xhci_warn(xhci, "%s while waiting for address device command\n",
timeleft == 0 ? "Timeout" : "Signal");
- /* FIXME cancel the address device command */
+ /* cancel the address device command */
+ ret = xhci_cancel_cmd(xhci, NULL, cmd_trb);
+ if (ret < 0)
+ return ret;
return -ETIME;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index a7760bf..b2a5527 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1256,6 +1256,16 @@ struct xhci_td {
union xhci_trb *last_trb;
};
+/* xHCI command default timeout value */
+#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
+
+/* command descriptor */
+struct xhci_cd {
+ struct list_head cancel_cmd_list;
+ struct xhci_command *command;
+ union xhci_trb *cmd_trb;
+};
+
struct xhci_dequeue_state {
struct xhci_segment *new_deq_seg;
union xhci_trb *new_deq_ptr;
@@ -1421,6 +1431,11 @@ struct xhci_hcd {
/* data structures */
struct xhci_device_context_array *dcbaa;
struct xhci_ring *cmd_ring;
+ unsigned int cmd_ring_state;
+#define CMD_RING_STATE_RUNNING (1 << 0)
+#define CMD_RING_STATE_ABORTED (1 << 1)
+#define CMD_RING_STATE_STOPPED (1 << 2)
+ struct list_head cancel_cmd_list;
unsigned int cmd_ring_reserved_trbs;
struct xhci_ring *event_ring;
struct xhci_erst erst;
@@ -1496,6 +1511,7 @@ struct xhci_hcd {
#define XHCI_INTEL_HOST (1 << 12)
#define XHCI_SPURIOUS_REBOOT (1 << 13)
#define XHCI_COMP_MODE_QUIRK (1 << 14)
+#define XHCI_AVOID_BEI (1 << 15)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
@@ -1702,6 +1718,8 @@ static inline void xhci_unregister_plat(void)
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+ u32 mask, u32 done, int usec);
void xhci_quiesce(struct xhci_hcd *xhci);
int xhci_halt(struct xhci_hcd *xhci);
int xhci_reset(struct xhci_hcd *xhci);
@@ -1792,6 +1810,8 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
struct xhci_dequeue_state *deq_state);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+ union xhci_trb *cmd_trb);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f906b3a..b71ee32 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -584,6 +584,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
/*
* ELV devices:
*/
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 41fe582..57c12ef 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -517,6 +517,11 @@
*/
#define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */
/********************************/
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 61ab0ed..d581ed3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -870,7 +870,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index a4edc7e..9b1b96f 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,8 +36,6 @@
#define UTSTARCOM_PRODUCT_UM175_V1 0x3712
#define UTSTARCOM_PRODUCT_UM175_V2 0x3714
#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715
-#define PANTECH_PRODUCT_UML190_VZW 0x3716
-#define PANTECH_PRODUCT_UML290_VZW 0x3718
/* CMOTECH devices */
#define CMOTECH_VENDOR_ID 0x16d8
@@ -68,11 +66,9 @@ static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */
- { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */
+ { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
+ { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
+ { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 27483f9..667c39c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1426,9 +1426,10 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[]
/* we only set the reset_resume field if the serial_driver has one */
for (sd = serial_drivers; *sd; ++sd) {
- if ((*sd)->reset_resume)
+ if ((*sd)->reset_resume) {
udriver->reset_resume = usb_serial_reset_resume;
break;
+ }
}
rc = usb_register(udriver);
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index 0334272..77c9f76 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -362,6 +362,7 @@ static int __devinit pcistub_init_device(struct pci_dev *dev)
else {
dev_dbg(&dev->dev, "reseting (FLR, D3, etc) the device\n");
__pci_reset_function_locked(dev);
+ pci_restore_state(dev);
}
/* Now disable the device (this also ensures some private device
* data is setup before we export)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 1b52956..0225fdd 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1696,30 +1696,19 @@ static int elf_note_info_init(struct elf_note_info *info)
return 0;
info->psinfo = kmalloc(sizeof(*info->psinfo), GFP_KERNEL);
if (!info->psinfo)
- goto notes_free;
+ return 0;
info->prstatus = kmalloc(sizeof(*info->prstatus), GFP_KERNEL);
if (!info->prstatus)
- goto psinfo_free;
+ return 0;
info->fpu = kmalloc(sizeof(*info->fpu), GFP_KERNEL);
if (!info->fpu)
- goto prstatus_free;
+ return 0;
#ifdef ELF_CORE_COPY_XFPREGS
info->xfpu = kmalloc(sizeof(*info->xfpu), GFP_KERNEL);
if (!info->xfpu)
- goto fpu_free;
+ return 0;
#endif
return 1;
-#ifdef ELF_CORE_COPY_XFPREGS
- fpu_free:
- kfree(info->fpu);
-#endif
- prstatus_free:
- kfree(info->prstatus);
- psinfo_free:
- kfree(info->psinfo);
- notes_free:
- kfree(info->notes);
- return 0;
}
static int fill_note_info(struct elfhdr *elf, int phdrs,
diff --git a/fs/dcache.c b/fs/dcache.c
index 4123b92..9560257 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1132,6 +1132,8 @@ positive:
return 1;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -1234,6 +1236,8 @@ out:
rename_retry:
if (found)
return found;
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -3031,6 +3035,8 @@ resume:
return;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c642b81..c71eea2 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1846,7 +1846,6 @@
#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081
#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530
#define PCI_VENDOR_ID_RADISYS 0x1331
diff --git a/security/yama/yama_lsm.c b/security/yama/yama_lsm.c
index 0cc99a3..dcd6178 100644
--- a/security/yama/yama_lsm.c
+++ b/security/yama/yama_lsm.c
@@ -143,7 +143,7 @@ static int yama_task_prctl(int option, unsigned long arg2, unsigned long arg3,
if (arg2 == 0) {
yama_ptracer_del(NULL, myself);
rc = 0;
- } else if (arg2 == PR_SET_PTRACER_ANY) {
+ } else if (arg2 == PR_SET_PTRACER_ANY || (int)arg2 == -1) {
rc = yama_ptracer_add(NULL, myself);
} else {
struct task_struct *tracer;
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index d9834b3..2984ffb 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -106,7 +106,7 @@ static void kvp_acquire_lock(int pool)
if (fcntl(kvp_file_info[pool].fd, F_SETLKW, &fl) == -1) {
syslog(LOG_ERR, "Failed to acquire the lock pool: %d", pool);
- exit(-1);
+ exit(EXIT_FAILURE);
}
}
@@ -118,7 +118,7 @@ static void kvp_release_lock(int pool)
if (fcntl(kvp_file_info[pool].fd, F_SETLK, &fl) == -1) {
perror("fcntl");
syslog(LOG_ERR, "Failed to release the lock pool: %d", pool);
- exit(-1);
+ exit(EXIT_FAILURE);
}
}
@@ -137,14 +137,19 @@ static void kvp_update_file(int pool)
if (!filep) {
kvp_release_lock(pool);
syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
- exit(-1);
+ exit(EXIT_FAILURE);
}
bytes_written = fwrite(kvp_file_info[pool].records,
sizeof(struct kvp_record),
kvp_file_info[pool].num_records, filep);
- fflush(filep);
+ if (ferror(filep) || fclose(filep)) {
+ kvp_release_lock(pool);
+ syslog(LOG_ERR, "Failed to write file, pool: %d", pool);
+ exit(EXIT_FAILURE);
+ }
+
kvp_release_lock(pool);
}
@@ -163,14 +168,19 @@ static void kvp_update_mem_state(int pool)
if (!filep) {
kvp_release_lock(pool);
syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
- exit(-1);
+ exit(EXIT_FAILURE);
}
- while (!feof(filep)) {
+ for (;;) {
readp = &record[records_read];
records_read += fread(readp, sizeof(struct kvp_record),
ENTRIES_PER_BLOCK * num_blocks,
filep);
+ if (ferror(filep)) {
+ syslog(LOG_ERR, "Failed to read file, pool: %d", pool);
+ exit(EXIT_FAILURE);
+ }
+
if (!feof(filep)) {
/*
* We have more data to read.
@@ -180,7 +190,7 @@ static void kvp_update_mem_state(int pool)
if (record == NULL) {
syslog(LOG_ERR, "malloc failed");
- exit(-1);
+ exit(EXIT_FAILURE);
}
continue;
}
@@ -191,6 +201,7 @@ static void kvp_update_mem_state(int pool)
kvp_file_info[pool].records = record;
kvp_file_info[pool].num_records = records_read;
+ fclose(filep);
kvp_release_lock(pool);
}
static int kvp_file_init(void)
@@ -208,7 +219,7 @@ static int kvp_file_init(void)
if (access("/var/opt/hyperv", F_OK)) {
if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) {
syslog(LOG_ERR, " Failed to create /var/opt/hyperv");
- exit(-1);
+ exit(EXIT_FAILURE);
}
}
@@ -232,12 +243,18 @@ static int kvp_file_init(void)
fclose(filep);
return 1;
}
- while (!feof(filep)) {
+ for (;;) {
readp = &record[records_read];
records_read += fread(readp, sizeof(struct kvp_record),
ENTRIES_PER_BLOCK,
filep);
+ if (ferror(filep)) {
+ syslog(LOG_ERR, "Failed to read file, pool: %d",
+ i);
+ exit(EXIT_FAILURE);
+ }
+
if (!feof(filep)) {
/*
* We have more data to read.
@@ -657,13 +674,13 @@ int main(void)
if (kvp_file_init()) {
syslog(LOG_ERR, "Failed to initialize the pools");
- exit(-1);
+ exit(EXIT_FAILURE);
}
fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
if (fd < 0) {
syslog(LOG_ERR, "netlink socket creation failed; error:%d", fd);
- exit(-1);
+ exit(EXIT_FAILURE);
}
addr.nl_family = AF_NETLINK;
addr.nl_pad = 0;
@@ -675,7 +692,7 @@ int main(void)
if (error < 0) {
syslog(LOG_ERR, "bind failed; error:%d", error);
close(fd);
- exit(-1);
+ exit(EXIT_FAILURE);
}
sock_opt = addr.nl_groups;
setsockopt(fd, 270, 1, &sock_opt, sizeof(sock_opt));
@@ -695,7 +712,7 @@ int main(void)
if (len < 0) {
syslog(LOG_ERR, "netlink_send failed; error:%d", len);
close(fd);
- exit(-1);
+ exit(EXIT_FAILURE);
}
pfd.fd = fd;
@@ -863,7 +880,7 @@ kvp_done:
len = netlink_send(fd, incoming_cn_msg);
if (len < 0) {
syslog(LOG_ERR, "net_link send failed; error:%d", len);
- exit(-1);
+ exit(EXIT_FAILURE);
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists