[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20121007225838.447588565@decadent.org.uk>
Date: Sun, 07 Oct 2012 23:59:01 +0100
From: Ben Hutchings <ben@...adent.org.uk>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
"Stephen M. Cameron" <scameron@...rdog.cce.hp.com>,
James Bottomley <JBottomley@...allels.com>
Subject: [ 027/108] [SCSI] hpsa: fix handling of protocol error
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Stephen M. Cameron" <scameron@...rdog.cce.hp.com>
commit 256d0eaac87da1e993190846064f339f4c7a63f5 upstream.
If a command status of CMD_PROTOCOL_ERR is received, this
information should be conveyed to the SCSI mid layer, not
dropped on the floor. CMD_PROTOCOL_ERR may be received
from the Smart Array for any commands destined for an external
RAID controller such as a P2000, or commands destined for tape
drives or CD/DVD-ROM drives, if for instance a cable is
disconnected. This mostly affects multipath configurations, as
disconnecting a cable on a non-multipath configuration is not
going to do anything good regardless of whether CMD_PROTOCOL_ERR
is handled correctly or not. Not handling CMD_PROTOCOL_ERR
correctly in a multipath configaration involving external RAID
controllers may cause data corruption, so this is quite a serious
bug. This bug should not normally cause a problem for direct
attached disk storage.
Signed-off-by: Stephen M. Cameron <scameron@...rdog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@...allels.com>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
drivers/scsi/hpsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 796482b..2b4261c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp)
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "cp %p has "
- "protocol error \n", cp);
+ "protocol error\n", cp);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists