linux-kernel - usb 3.0 hard drive doesn't work

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAKhuMP=DB2WGzNN2dXoFuJtSRCneBrToUb43KjU_OsQCrJP_UA@mail.gmail.com>
Date:	Sun, 7 Oct 2012 16:48:04 +0800
From:	王思源 <wangsiyuanbuaa@...il.com>
To:	linux-kernel@...r.kernel.org
Subject: usb 3.0 hard drive doesn't work

hi,
i have a usb 3.0 hard drive and a laptop with usb 3.0 port.
when the hard drive is connected to the usb 3.0 port, the drive could
not be found.
the dmesg output is listed below.
additinal info:
1) the usb 3.0 hard drive can be found when connected to usb 2.0 port.
2) the usb 2.0 hard drive can be found when connected to usb 3.0 port.
3) mouse works when connected to the usb 3.0 port.
4) it is archlinux and kernel version is 3.5.5-1-ARCH
it seems that it is not the linux driver's problem, because the mouse
could work and the hard drive is found due to the dmesg.
is this a bug?
would someone help me?
thank you!

dmesg out put when usb 3.0 hard drive is conneted to usb 3.0 port:
[  646.077385] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[  646.171319] usbcore: registered new interface driver uas
[  646.175313] Initializing USB Mass Storage driver...
[  646.175501] scsi4 : usb-storage 2-2:1.0
[  646.175665] usbcore: registered new interface driver usb-storage
[  646.175667] USB Mass Storage support registered.
[  657.149403] scsi 4:0:0:0: Direct-Access     WD       My Passport
0730 1016 PQ: 0 ANSI: 6
[  657.149974] sd 4:0:0:0: [sdb] 976707584 512-byte logical blocks:
(500 GB/465 GiB)
[  657.150223] sd 4:0:0:0: [sdb] Write Protect is off
[  657.150232] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08
[  657.150456] sd 4:0:0:0: [sdb] No Caching mode page present
[  657.150462] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  657.151436] sd 4:0:0:0: [sdb] No Caching mode page present
[  657.151440] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  657.159907]  sdb: sdb1
[  657.160852] sd 4:0:0:0: [sdb] No Caching mode page present
[  657.160858] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[  657.160861] sd 4:0:0:0: [sdb] Attached SCSI disk
[  657.268875] usb 2-2: Device not responding to set address.
[  657.471456] usb 2-2: Device not responding to set address.
[  657.674211] usb 2-2: device not accepting address 2, error -71
[  657.780745] usb 2-2: Device not responding to set address.
[  657.983519] usb 2-2: Device not responding to set address.
[  658.186214] usb 2-2: device not accepting address 2, error -71
[  658.292717] usb 2-2: Device not responding to set address.
[  658.495537] usb 2-2: Device not responding to set address.
[  658.698277] usb 2-2: device not accepting address 2, error -71
[  658.804774] usb 2-2: Device not responding to set address.
[  659.007557] usb 2-2: Device not responding to set address.
[  659.210298] usb 2-2: device not accepting address 2, error -71
[  659.210366] usb 2-2: USB disconnect, device number 2
[  659.213797] sd 4:0:0:0: [sdb] Unhandled error code
[  659.213804] sd 4:0:0:0: [sdb]
[  659.213808] Result: hostbyte=0x01 driverbyte=0x00
[  659.213812] sd 4:0:0:0: [sdb] CDB:
[  659.213814] cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
[  659.213826] end_request: I/O error, dev sdb, sector 0
[  659.213830] Buffer I/O error on device sdb, logical block 0
[  659.214647] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800b375fe40
[  659.214656] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800b375fe00
[  659.320085] usb 2-2: Device not responding to set address.
[  659.522884] usb 2-2: Device not responding to set address.
[  659.725646] usb 2-2: device not accepting address 3, error -71
[  659.832077] usb 2-2: Device not responding to set address.
[  660.034905] usb 2-2: Device not responding to set address.
[  660.237663] usb 2-2: device not accepting address 4, error -71
[  660.344135] usb 2-2: Device not responding to set address.
[  660.546938] usb 2-2: Device not responding to set address.
[  660.749642] usb 2-2: device not accepting address 5, error -71
[  660.856129] usb 2-2: Device not responding to set address.
[  661.058946] usb 2-2: Device not responding to set address.
[  661.261701] usb 2-2: device not accepting address 6, error -71
[  661.261722] hub 2-0:1.0: unable to enumerate USB device on port 2

-- 
王思源
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/