[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1349982281-10785-13-git-send-email-mporter@ti.com>
Date: Thu, 11 Oct 2012 15:04:37 -0400
From: Matt Porter <mporter@...com>
To: Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
Cc: Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
Rob Herring <rob.herring@...xeda.com>
Subject: [RFC PATCH v2 12/16] mmc: omap_hsmmc: add generic DMA request support to the DT binding
The binding definition is based on the generic DMA request binding.
Signed-off-by: Matt Porter <mporter@...com>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index be76a23..d1b8932 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -19,8 +19,28 @@ ti,dual-volt: boolean, supports dual voltage cards
"supply-name" examples are "vmmc", "vmmc_aux" etc
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
+dmas: DMA controller phandle and DMA request value ordered pair
+One tx and one rx pair is required.
+dma-names: DMA request names. These strings correspond 1:1 with
+the ordered pairs in dmas. The RX request must be "rx" and the
+TX request must be "tx".
+
+Examples:
+
+[hwmod populated DMA resources]
+
+ mmc1: mmc@...809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
+
+[generic DMA request binding]
-Example:
mmc1: mmc@...809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
@@ -29,4 +49,7 @@ Example:
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists