| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20121013101234.10350.9980.stgit@warthog.procyon.org.uk>
Date: Sat, 13 Oct 2012 11:12:35 +0100
From: David Howells <dhowells@...hat.com>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-kernel@...r.kernel.org, David Howells <dhowells@...hat.com>,
Jens Axboe <jaxboe@...ionio.com>, Tejun Heo <tj@...nel.org>,
Al Viro <viro@...IV.linux.org.uk>
Subject: [PATCH] UAPI: Unexport linux/blk_types.h [ver #2]
It seems that was linux/blk_types.h incorrectly exported to fix up some missing
bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.).
So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h.
Signed-off-by: David Howells <dhowells@...hat.com>
cc: Jens Axboe <jaxboe@...ionio.com>
cc: Tejun Heo <tj@...nel.org>
cc: Al Viro <viro@...IV.linux.org.uk>
---
include/linux/Kbuild | 1
include/linux/fs.h | 119 +++++++++++++++++++++++++-------------------------
2 files changed, 59 insertions(+), 61 deletions(-)
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d114db9..e2a1346 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -69,7 +69,6 @@ header-y += b1lli.h
header-y += baycom.h
header-y += bfs_fs.h
header-y += binfmts.h
-header-y += blk_types.h
header-y += blkpg.h
header-y += blktrace_api.h
header-y += bpqether.h
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 65fbf57..8cb86cf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -8,7 +8,6 @@
#include <linux/limits.h>
#include <linux/ioctl.h>
-#include <linux/blk_types.h>
#include <linux/types.h>
/*
@@ -118,65 +117,6 @@ struct inodes_stat_t {
#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
/*
- * The below are the various read and write types that we support. Some of
- * them include behavioral modifiers that send information down to the
- * block layer and IO scheduler. Terminology:
- *
- * The block layer uses device plugging to defer IO a little bit, in
- * the hope that we will see more IO very shortly. This increases
- * coalescing of adjacent IO and thus reduces the number of IOs we
- * have to send to the device. It also allows for better queuing,
- * if the IO isn't mergeable. If the caller is going to be waiting
- * for the IO, then he must ensure that the device is unplugged so
- * that the IO is dispatched to the driver.
- *
- * All IO is handled async in Linux. This is fine for background
- * writes, but for reads or writes that someone waits for completion
- * on, we want to notify the block layer and IO scheduler so that they
- * know about it. That allows them to make better scheduling
- * decisions. So when the below references 'sync' and 'async', it
- * is referencing this priority hint.
- *
- * With that in mind, the available types are:
- *
- * READ A normal read operation. Device will be plugged.
- * READ_SYNC A synchronous read. Device is not plugged, caller can
- * immediately wait on this read without caring about
- * unplugging.
- * READA Used for read-ahead operations. Lower priority, and the
- * block layer could (in theory) choose to ignore this
- * request if it runs into resource problems.
- * WRITE A normal async write. Device will be plugged.
- * WRITE_SYNC Synchronous write. Identical to WRITE, but passes down
- * the hint that someone will be waiting on this IO
- * shortly. The write equivalent of READ_SYNC.
- * WRITE_ODIRECT Special case write for O_DIRECT only.
- * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush.
- * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on
- * non-volatile media on completion.
- * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded
- * by a cache flush and data is guaranteed to be on
- * non-volatile media on completion.
- *
- */
-#define RW_MASK REQ_WRITE
-#define RWA_MASK REQ_RAHEAD
-
-#define READ 0
-#define WRITE RW_MASK
-#define READA RWA_MASK
-#define KERNEL_READ (READ|REQ_KERNEL)
-#define KERNEL_WRITE (WRITE|REQ_KERNEL)
-
-#define READ_SYNC (READ | REQ_SYNC)
-#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
-#define WRITE_ODIRECT (WRITE | REQ_SYNC)
-#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
-#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
-#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
-
-
-/*
* Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
* that indicates that they should check the contents of the iovec are
* valid, but not check the memory that the iovec elements
@@ -417,6 +357,7 @@ struct inodes_stat_t {
#include <linux/uidgid.h>
#include <linux/lockdep.h>
#include <linux/percpu-rwsem.h>
+#include <linux/blk_types.h>
#include <asm/byteorder.h>
@@ -454,6 +395,64 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
bool is_async);
/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ * The block layer uses device plugging to defer IO a little bit, in
+ * the hope that we will see more IO very shortly. This increases
+ * coalescing of adjacent IO and thus reduces the number of IOs we
+ * have to send to the device. It also allows for better queuing,
+ * if the IO isn't mergeable. If the caller is going to be waiting
+ * for the IO, then he must ensure that the device is unplugged so
+ * that the IO is dispatched to the driver.
+ *
+ * All IO is handled async in Linux. This is fine for background
+ * writes, but for reads or writes that someone waits for completion
+ * on, we want to notify the block layer and IO scheduler so that they
+ * know about it. That allows them to make better scheduling
+ * decisions. So when the below references 'sync' and 'async', it
+ * is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ A normal read operation. Device will be plugged.
+ * READ_SYNC A synchronous read. Device is not plugged, caller can
+ * immediately wait on this read without caring about
+ * unplugging.
+ * READA Used for read-ahead operations. Lower priority, and the
+ * block layer could (in theory) choose to ignore this
+ * request if it runs into resource problems.
+ * WRITE A normal async write. Device will be plugged.
+ * WRITE_SYNC Synchronous write. Identical to WRITE, but passes down
+ * the hint that someone will be waiting on this IO
+ * shortly. The write equivalent of READ_SYNC.
+ * WRITE_ODIRECT Special case write for O_DIRECT only.
+ * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush.
+ * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on
+ * non-volatile media on completion.
+ * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded
+ * by a cache flush and data is guaranteed to be on
+ * non-volatile media on completion.
+ *
+ */
+#define RW_MASK REQ_WRITE
+#define RWA_MASK REQ_RAHEAD
+
+#define READ 0
+#define WRITE RW_MASK
+#define READA RWA_MASK
+#define KERNEL_READ (READ|REQ_KERNEL)
+#define KERNEL_WRITE (WRITE|REQ_KERNEL)
+
+#define READ_SYNC (READ | REQ_SYNC)
+#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_ODIRECT (WRITE | REQ_SYNC)
+#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
+#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
+#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+
+/*
* Attribute flags. These should be or-ed together to figure out what
* has been changed!
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists