Message-ID: <1350372345-27108-9-git-send-email-rachna@ti.com>
Date:	Tue, 16 Oct 2012 12:55:45 +0530
From:	"Patil, Rachna" <rachna@...com>
To:	<linux-kernel@...r.kernel.org>, <linux-input@...r.kernel.org>,
	<linux-iio@...r.kernel.org>
CC:	Samuel Ortiz <sameo@...ux.intel.com>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Dmitry Torokhov <dtor@...l.ru>,
	Jonathan Cameron <jic23@....ac.uk>,
	"Patil, Rachna" <rachna@...com>
Subject: [PATCH RESEND 8/8] IIO : ADC: tiadc: Add support of TI's ADC driver

This patch adds support for TI's ADC driver.
This is a multifunctional device.
Analog input lines are provided on which
voltage measurements can be carried out.
You can have upto 8 input lines.

Signed-off-by: Patil, Rachna <rachna@...com>
Acked-by: Jonathan Cameron <jic23@...nel.org>
---
Changes in v2:
	Addressed review comments from Matthias Kaehlcke

Changes in v3:
	Addressed review comments from Jonathan Cameron.
	Added comments, new line appropriately.

Changes in v4:
	Removed extra comments and variables.
	rename idev to indio_dev throughout the driver.
	Renamed structs for better readability.

Changes in v5:
	No changes

 drivers/iio/adc/Kconfig                     |    7 +
 drivers/iio/adc/Makefile                    |    1 +
 drivers/iio/adc/ti_am335x_adc.c             |  260 +++++++++++++++++++++++++++
 drivers/mfd/ti_am335x_tscadc.c              |   18 ++-
 include/linux/mfd/ti_am335x_tscadc.h        |    9 +-
 include/linux/platform_data/ti_am335x_adc.h |   14 ++
 6 files changed, 307 insertions(+), 2 deletions(-)
 create mode 100644 drivers/iio/adc/ti_am335x_adc.c
 create mode 100644 include/linux/platform_data/ti_am335x_adc.h

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 4927581..1401ed1 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -60,4 +60,11 @@ config LP8788_ADC
 	help
 	  Say yes here to build support for TI LP8788 ADC.
 
+config TI_AM335X_ADC
+	tristate "TI's ADC driver"
+	depends on MFD_TI_AM335X_TSCADC
+	help
+	  Say yes here to build support for Texas Instruments ADC
+	  driver which is also a MFD client.
+
 endmenu
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 900995d..4410a90 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_AD7476) += ad7476.o
 obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
+obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
new file mode 100644
index 0000000..02a43c8
--- /dev/null
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -0,0 +1,260 @@
+/*
+ * TI ADC MFD driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/platform_data/ti_am335x_adc.h>
+
+struct tiadc_device {
+	struct ti_tscadc_dev *mfd_tscadc;
+	int channels;
+};
+
+static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
+{
+	return readl(adc->mfd_tscadc->tscadc_base + reg);
+}
+
+static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
+					unsigned int val)
+{
+	writel(val, adc->mfd_tscadc->tscadc_base + reg);
+}
+
+static void tiadc_step_config(struct tiadc_device *adc_dev)
+{
+	unsigned int stepconfig;
+	int i, channels = 0, steps;
+
+	/*
+	 * There are 16 configurable steps and 8 analog input
+	 * lines available which are shared between Touchscreen and ADC.
+	 *
+	 * Steps backwards i.e. from 16 towards 0 are used by ADC
+	 * depending on number of input lines needed.
+	 * Channel would represent which analog input
+	 * needs to be given to ADC to digitalize data.
+	 */
+
+	steps = TOTAL_STEPS - adc_dev->channels;
+	channels = TOTAL_CHANNELS - adc_dev->channels;
+
+	stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1;
+
+	for (i = (steps + 1); i <= TOTAL_STEPS; i++) {
+		tiadc_writel(adc_dev, REG_STEPCONFIG(i),
+				stepconfig | STEPCONFIG_INP(channels));
+		tiadc_writel(adc_dev, REG_STEPDELAY(i),
+				STEPCONFIG_OPENDLY);
+		channels++;
+	}
+	tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
+}
+
+static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
+{
+	struct iio_chan_spec *chan_array;
+	int i;
+
+	indio_dev->num_channels = channels;
+	chan_array = kcalloc(indio_dev->num_channels,
+			sizeof(struct iio_chan_spec), GFP_KERNEL);
+
+	if (chan_array == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < (indio_dev->num_channels); i++) {
+		struct iio_chan_spec *chan = chan_array + i;
+		chan->type = IIO_VOLTAGE;
+		chan->indexed = 1;
+		chan->channel = i;
+		chan->info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT;
+	}
+
+	indio_dev->channels = chan_array;
+
+	return indio_dev->num_channels;
+}
+
+static void tiadc_channels_remove(struct iio_dev *indio_dev)
+{
+	kfree(indio_dev->channels);
+}
+
+static int tiadc_read_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan,
+		int *val, int *val2, long mask)
+{
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	int i;
+	unsigned int fifo1count, readx1;
+
+	/*
+	 * When the sub-system is first enabled,
+	 * the sequencer will always start with the
+	 * lowest step (1) and continue until step (16).
+	 * For ex: If we have enabled 4 ADC channels and
+	 * currently use only 1 out of them, the
+	 * sequencer still configures all the 4 steps,
+	 * leading to 3 unwanted data.
+	 * Hence we need to flush out this data.
+	 */
+
+	fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
+	for (i = 0; i < fifo1count; i++) {
+		readx1 = tiadc_readl(adc_dev, REG_FIFO1);
+		if (i == chan->channel)
+			*val = readx1 & 0xfff;
+	}
+	tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
+
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info tiadc_info = {
+	.read_raw = &tiadc_read_raw,
+};
+
+static int __devinit tiadc_probe(struct platform_device *pdev)
+{
+	struct iio_dev		*indio_dev;
+	struct tiadc_device	*adc_dev;
+	struct ti_tscadc_dev	*tscadc_dev = pdev->dev.platform_data;
+	struct mfd_tscadc_board	*pdata;
+	int			err;
+
+	pdata = tscadc_dev->dev->platform_data;
+	if (!pdata || !pdata->adc_init) {
+		dev_err(&pdev->dev, "Could not find platform data\n");
+		return -EINVAL;
+	}
+
+	indio_dev = iio_device_alloc(sizeof(struct tiadc_device));
+	if (indio_dev == NULL) {
+		dev_err(&pdev->dev, "failed to allocate iio device\n");
+		err = -ENOMEM;
+		goto err_ret;
+	}
+	adc_dev = iio_priv(indio_dev);
+
+	adc_dev->mfd_tscadc = tscadc_dev;
+	adc_dev->channels = pdata->adc_init->adc_channels;
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &tiadc_info;
+
+	tiadc_step_config(adc_dev);
+
+	err = tiadc_channel_init(indio_dev, adc_dev->channels);
+	if (err < 0)
+		goto err_free_device;
+
+	err = iio_device_register(indio_dev);
+	if (err)
+		goto err_free_channels;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	return 0;
+
+err_free_channels:
+	tiadc_channels_remove(indio_dev);
+err_free_device:
+	iio_device_free(indio_dev);
+err_ret:
+	return err;
+}
+
+static int __devexit tiadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_device_unregister(indio_dev);
+	tiadc_channels_remove(indio_dev);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tiadc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+	unsigned int idle;
+
+	if (!device_may_wakeup(tscadc_dev->dev)) {
+		idle = tiadc_readl(adc_dev, REG_CTRL);
+		idle &= ~(CNTRLREG_TSCSSENB);
+		tiadc_writel(adc_dev, REG_CTRL, (idle |
+				CNTRLREG_POWERDOWN));
+	}
+
+	return 0;
+}
+
+static int tiadc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tiadc_device *adc_dev = iio_priv(indio_dev);
+	unsigned int restore;
+
+	/* Make sure ADC is powered up */
+	restore = tiadc_readl(adc_dev, REG_CTRL);
+	restore &= ~(CNTRLREG_POWERDOWN);
+	tiadc_writel(adc_dev, REG_CTRL, restore);
+
+	tiadc_step_config(adc_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tiadc_pm_ops = {
+	.suspend = tiadc_suspend,
+	.resume = tiadc_resume,
+};
+#define TIADC_PM_OPS (&tiadc_pm_ops)
+#else
+#define TIADC_PM_OPS NULL
+#endif
+
+static struct platform_driver tiadc_driver = {
+	.driver = {
+		.name   = "tiadc",
+		.owner	= THIS_MODULE,
+		.pm	= TIADC_PM_OPS,
+	},
+	.probe	= tiadc_probe,
+	.remove	= __devexit_p(tiadc_remove),
+};
+
+module_platform_driver(tiadc_driver);
+
+MODULE_DESCRIPTION("TI ADC controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@...com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index d812be4..e947dd8 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -25,6 +25,7 @@
 
 #include <linux/mfd/ti_am335x_tscadc.h>
 #include <linux/input/ti_am335x_tsc.h>
+#include <linux/platform_data/ti_am335x_adc.h>
 
 static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
 {
@@ -67,14 +68,23 @@ static	int __devinit ti_tscadc_probe(struct platform_device *pdev)
 	int			irq;
 	int			err, ctrl;
 	int			clk_value, clock_rate;
-	int			tsc_wires;
+	int			tsc_wires, adc_channels = 0, total_channels;
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "Could not find platform data\n");
 		return -EINVAL;
 	}
 
+	if (pdata->adc_init)
+		adc_channels = pdata->adc_init->adc_channels;
+
 	tsc_wires = pdata->tsc_init->wires;
+	total_channels = tsc_wires + adc_channels;
+
+	if (total_channels > 8) {
+		dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
+		return -EINVAL;
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -172,6 +182,12 @@ static	int __devinit ti_tscadc_probe(struct platform_device *pdev)
 	cell->platform_data = tscadc;
 	cell->pdata_size = sizeof(*tscadc);
 
+	/* ADC Cell */
+	cell = &tscadc->cells[ADC_CELL];
+	cell->name = "tiadc";
+	cell->platform_data = tscadc;
+	cell->pdata_size = sizeof(*tscadc);
+
 	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
 			TSCADC_CELLS, NULL, 0, NULL);
 	if (err < 0)
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index fc18b2e..c79ad5d 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -120,15 +120,19 @@
 
 #define ADC_CLK			3000000
 #define	MAX_CLK_DIV		7
+#define TOTAL_STEPS		16
+#define TOTAL_CHANNELS		8
 
-#define TSCADC_CELLS		1
+#define TSCADC_CELLS		2
 
 enum tscadc_cells {
 	TSC_CELL,
+	ADC_CELL,
 };
 
 struct mfd_tscadc_board {
 	struct tsc_data *tsc_init;
+	struct adc_data *adc_init;
 };
 
 struct ti_tscadc_dev {
@@ -140,6 +144,9 @@ struct ti_tscadc_dev {
 
 	/* tsc device */
 	struct titsc *tsc;
+
+	/* adc device */
+	struct adc_device *adc;
 };
 
 #endif
diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h
new file mode 100644
index 0000000..e41d583
--- /dev/null
+++ b/include/linux/platform_data/ti_am335x_adc.h
@@ -0,0 +1,14 @@
+#ifndef __LINUX_TI_AM335X_ADC_H
+#define __LINUX_TI_AM335X_ADC_H
+
+/**
+ * struct adc_data	ADC Input information
+ * @adc_channels:	Number of analog inputs
+ *			available for ADC.
+ */
+
+struct adc_data {
+	unsigned int adc_channels;
+};
+
+#endif
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists