| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1350388459-28975-2-git-send-email-yadi.brar@samsung.com>
Date: Tue, 16 Oct 2012 17:24:19 +0530
From: Yadwinder Singh Brar <yadi.brar@...sung.com>
To: linux-kernel@...r.kernel.org
Cc: Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Liam Girdwood <lrg@...com>,
Jonghwa Lee <jonghwa3.lee@...sung.com>,
Myungjoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Chiwoong Byun <woong.byun@...sung.com>,
Yadwinder Singh Brar <yadi.brar01@...il.com>,
Yadwinder Singh Brar <yadi.brar@...sung.com>
Subject: [PATCH v2 2/2] regulator: max77686: Add
set_suspend_disable/set_suspend_mode callbacks.
This patch implements set_suspend_disable callback for BUCKs which
support only switch ON/OFF modes during system suspend state, and
set_suspend_mode callbacks for LDOs which also suport Low power mode and
switch ON/OFF modes.
Signed-off-by: Yadwinder Singh Brar <yadi.brar@...sung.com>
---
drivers/regulator/max77686.c | 148 ++++++++++++++++++++++++++++++++++++++++--
1 files changed, 141 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 20dae7b..383eb9d 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -70,6 +70,82 @@ struct max77686_data {
unsigned int opmode[MAX77686_REGULATORS];
};
+/* Some BUCKS supports Normal[ON/OFF] mode during suspend */
+static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int val;
+ struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+
+ if (rdev->desc->id == MAX77686_BUCK1)
+ val = 0x1;
+ else
+ val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
+
+ max77686->opmode[rdev->desc->id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ val);
+}
+
+/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
+static int max77686_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ unsigned int val;
+
+ /* BUCK[5-9] doesn't support this feature */
+ if (rdev->desc->id >= MAX77686_BUCK5)
+ return 0;
+
+ switch (mode) {
+ case REGULATOR_MODE_IDLE: /* ON in LP Mode */
+ val = 0x2 << MAX77686_OPMODE_SHIFT;
+ break;
+ case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
+ val = 0x3 << MAX77686_OPMODE_SHIFT;
+ break;
+ default:
+ pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77686->opmode[rdev->desc->id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ val);
+}
+
+/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
+static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ unsigned int val;
+ struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY: /* switch off */
+ val = 0x1 << MAX77686_OPMODE_SHIFT;
+ break;
+ case REGULATOR_MODE_IDLE: /* ON in LP Mode */
+ val = 0x2 << MAX77686_OPMODE_SHIFT;
+ break;
+ case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
+ val = 0x3 << MAX77686_OPMODE_SHIFT;
+ break;
+ default:
+ pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ max77686->opmode[rdev->desc->id] = val;
+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ rdev->desc->enable_mask,
+ val);
+}
+
int max77686_enable(struct regulator_dev *rdev)
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
@@ -113,6 +189,31 @@ static struct regulator_ops max77686_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_mode = max77686_set_suspend_mode,
+};
+
+static struct regulator_ops max77686_ldo_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77686_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_mode = max77686_ldo_set_suspend_mode,
+};
+
+static struct regulator_ops max77686_buck1_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77686_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_suspend_disable = max77686_buck_set_suspend_disable,
};
static struct regulator_ops max77686_buck_dvs_ops = {
@@ -125,6 +226,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
+ .set_suspend_disable = max77686_buck_set_suspend_disable,
};
#define regulator_desc_ldo(num) { \
@@ -143,9 +245,41 @@ static struct regulator_ops max77686_buck_dvs_ops = {
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
+#define regulator_desc_lpm_ldo(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
+ .ops = &max77686_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_MINUV, \
+ .uV_step = MAX77686_LDO_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
#define regulator_desc_ldo_low(num) { \
.name = "LDO"#num, \
.id = MAX77686_LDO##num, \
+ .ops = &max77686_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = MAX77686_LDO_LOW_MINUV, \
+ .uV_step = MAX77686_LDO_LOW_UVSTEP, \
+ .ramp_delay = MAX77686_RAMP_DELAY, \
+ .n_voltages = MAX77686_VSEL_MASK + 1, \
+ .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .vsel_mask = MAX77686_VSEL_MASK, \
+ .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
+ .enable_mask = MAX77686_OPMODE_MASK \
+ << MAX77686_OPMODE_SHIFT, \
+}
+#define regulator_desc_ldo1_low(num) { \
+ .name = "LDO"#num, \
+ .id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -177,7 +311,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
#define regulator_desc_buck1(num) { \
.name = "BUCK"#num, \
.id = MAX77686_BUCK##num, \
- .ops = &max77686_ops, \
+ .ops = &max77686_buck1_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_BUCK_MINUV, \
@@ -207,7 +341,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
}
static struct regulator_desc regulators[] = {
- regulator_desc_ldo_low(1),
+ regulator_desc_ldo1_low(1),
regulator_desc_ldo_low(2),
regulator_desc_ldo(3),
regulator_desc_ldo(4),
@@ -216,13 +350,13 @@ static struct regulator_desc regulators[] = {
regulator_desc_ldo_low(7),
regulator_desc_ldo_low(8),
regulator_desc_ldo(9),
- regulator_desc_ldo(10),
- regulator_desc_ldo(11),
- regulator_desc_ldo(12),
+ regulator_desc_lpm_ldo(10),
+ regulator_desc_lpm_ldo(11),
+ regulator_desc_lpm_ldo(12),
regulator_desc_ldo(13),
- regulator_desc_ldo(14),
+ regulator_desc_lpm_ldo(14),
regulator_desc_ldo_low(15),
- regulator_desc_ldo(16),
+ regulator_desc_lpm_ldo(16),
regulator_desc_ldo(17),
regulator_desc_ldo(18),
regulator_desc_ldo(19),
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists