[ 0.000000] Linux version 3.7.0-rc1-bisect-next-20121016 (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #24 SMP Tue Oct 16 22:20:10 CST 2012 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff] [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff] [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff] [ 0.000000] found SMP MP-table at [mem 0x000fdac0-0x000fdacf] mapped at [c00fdac0] [ 0.000000] mpc: fdad0-fdbec [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c008f000] 8f000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff] [ 0.000000] [mem 0x00000000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x0fbfffff] page 2M [ 0.000000] [mem 0x0fc00000-0x0fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128476(98%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1af5d41, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65409 [ 0.000000] free_area_init_node: node 0, pgdat c1a4b7c0, node_mem_map cdd3f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3939 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60958 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffb000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 10 pages/cpu @cdd2b000 s25792 r0 d15168 u40960 [ 0.000000] pcpu-alloc: s25792 r0 d15168 u40960 alloc=10*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:dd30d41, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr dd2d6c0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64897 [ 0.000000] Kernel command line: rcutree.rcu_cpu_stall_timeout=100 hung_task_panic=1 bisect-reboot i386-randconfig-i070 branch=internal-yuanhan/pm-sleep-fixes log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw BOOT_IMAGE=i386/vmlinuz-bisect [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 214104k/262136k available (6821k kernel code, 47532k reserved, 3847k data, 556k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07fe000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfffe000 ( 255 MB) [ 0.000000] .init : 0xc1a6c000 - 0xc1af7000 ( 556 kB) [ 0.000000] .data : 0xc16a9660 - 0xc1a6b2c0 (3847 kB) [ 0.000000] .text : 0xc1000000 - 0xc16a9660 (6821 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:56 16 [ 0.000000] CPU 0 irqstacks, hard=cd808000 soft=cd80a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2693.456 MHz processor [ 0.008000] Calibrating delay loop (skipped) preset value.. 5386.91 BogoMIPS (lpj=10773824) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008133] Security Framework initialized [ 0.009380] Yama: becoming mindful. [ 0.010531] Mount-cache hash table entries: 512 [ 0.012597] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.012597] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.012597] tlb_flushall_shift: 6 [ 0.016304] Freeing SMP alternatives: 24k freed [ 0.022274] ACPI: Core revision 20120913 [ 0.033421] Getting VERSION: 50014 [ 0.034487] Getting VERSION: 50014 [ 0.035525] Getting ID: 0 [ 0.036018] Getting ID: f000000 [ 0.037064] Getting LVT0: 8700 [ 0.038077] Getting LVT1: 8400 [ 0.039038] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.040093] enabled ExtINT on CPU#0 [ 0.042207] ENABLING IO-APIC IRQs [ 0.044013] init IO_APIC IRQs [ 0.045046] apic 2 pin 0 not connected [ 0.046099] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.048033] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.050186] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.052029] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.054228] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.056033] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.058245] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.060035] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.064028] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.066235] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.068031] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.070301] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.072032] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.074320] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.076031] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.080024] apic 2 pin 16 not connected [ 0.081192] apic 2 pin 17 not connected [ 0.082289] apic 2 pin 18 not connected [ 0.083425] apic 2 pin 19 not connected [ 0.084007] apic 2 pin 20 not connected [ 0.085164] apic 2 pin 21 not connected [ 0.086319] apic 2 pin 22 not connected [ 0.088005] apic 2 pin 23 not connected [ 0.089297] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.091147] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.094389] Using local APIC timer interrupts. [ 0.094389] calibrating APIC timer ... [ 0.100000] ... lapic delta = 6249876 [ 0.100000] ... PM-Timer delta = 357948 [ 0.100000] ... PM-Timer result ok [ 0.100000] ..... delta 6249876 [ 0.100000] ..... mult: 268430130 [ 0.100000] ..... calibration result: 3999920 [ 0.100000] ..... CPU clock speed is 2693.1840 MHz. [ 0.100000] ..... host bus clock speed is 999.3920 MHz. [ 0.100068] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only. [ 0.105266] CPU 1 irqstacks, hard=cd88c000 soft=cd88e000 [ 0.106732] smpboot: Booting Node 0, Processors #1 OK [ 0.008000] Initializing CPU#1 [ 0.008000] kvm-clock: cpu 1, msr 0:dd3ad41, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.132047] Brought up 2 CPUs [ 0.133081] smpboot: Total of 2 processors activated (10773.82 BogoMIPS) [ 0.132025] KVM setup async PF for cpu 1 [ 0.132025] kvm-stealtime: cpu 1, msr dd376c0 [ 0.136464] CPU0 attaching sched-domain: [ 0.140008] domain 0: span 0-1 level CPU [ 0.141281] groups: 0 (cpu_power = 1003) 1 [ 0.142947] CPU1 attaching sched-domain: [ 0.144007] domain 0: span 0-1 level CPU [ 0.145268] groups: 1 0 (cpu_power = 1003) [ 0.148490] EVM: security.ima [ 0.149459] EVM: security.capability [ 0.151399] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.152225] NET: Registered protocol family 16 [ 0.154580] EISA bus registered [ 0.156696] ACPI: bus type pci registered [ 0.158121] PCI: PCI BIOS revision 2.10 entry at 0xfc78c, last bus=0 [ 0.160005] PCI: Using configuration type 1 for base access [ 0.175628] bio: create slab at 0 [ 0.176591] ACPI: Added _OSI(Module Device) [ 0.177913] ACPI: Added _OSI(Processor Device) [ 0.179101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180015] ACPI: Added _OSI(Processor Aggregator Device) [ 0.182286] ACPI: EC: Look up EC in DSDT [ 0.195531] ACPI: Interpreter enabled [ 0.196007] ACPI: (supports S0 S3 S5) [ 0.197584] ACPI: Using IOAPIC for interrupt routing [ 0.215413] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.216106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.220027] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.222223] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.224008] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.226387] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.228016] PCI: root bus 00: using default resources [ 0.229504] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.232139] PCI host bridge to bus 0000:00 [ 0.233363] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.236009] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.237726] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.240070] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.242049] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.244371] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.246933] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf] [ 0.248562] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.249797] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.251029] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.252134] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.254892] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.256803] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.261653] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.263686] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.264883] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 0.268845] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.274057] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.276057] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.278589] pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f] [ 0.280327] pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff] [ 0.284467] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.286039] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf] [ 0.287516] pci 0000:00:05.0: reg 14: [mem 0xfebf2000-0xfebf2fff] [ 0.291109] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.292631] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.294118] pci 0000:00:06.0: reg 14: [mem 0xfebf3000-0xfebf3fff] [ 0.298517] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.300320] pci 0000:00:07.0: reg 10: [io 0xc100-0xc13f] [ 0.301780] pci 0000:00:07.0: reg 14: [mem 0xfebf4000-0xfebf4fff] [ 0.305635] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.307219] pci 0000:00:08.0: reg 10: [io 0xc140-0xc17f] [ 0.308594] pci 0000:00:08.0: reg 14: [mem 0xfebf5000-0xfebf5fff] [ 0.312748] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.314351] pci 0000:00:09.0: reg 10: [io 0xc180-0xc1bf] [ 0.316004] pci 0000:00:09.0: reg 14: [mem 0xfebf6000-0xfebf6fff] [ 0.320139] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.321413] pci 0000:00:0a.0: reg 10: [mem 0xfebf7000-0xfebf700f] [ 0.324347] pci_bus 0000:00: on NUMA node 0 [ 0.325106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.329463] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.330775] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.355134] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.356585] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.358049] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.359540] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.360817] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.362176] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.363544] vgaarb: loaded [ 0.364003] vgaarb: bridge control possible 0000:00:02.0 [ 0.364912] tps65010: version 2 May 2005 [ 0.396071] tps65010: no chip? [ 0.398247] SCSI subsystem initialized [ 0.399494] libata version 3.00 loaded. [ 0.400087] ACPI: bus type usb registered [ 0.401375] usbcore: registered new interface driver usbfs [ 0.408048] usbcore: registered new interface driver hub [ 0.409733] usbcore: registered new device driver usb [ 0.412152] Linux video capture interface: v2.00 [ 0.413120] PCI: Using ACPI for IRQ routing [ 0.413874] PCI: pci_cache_line_size set to 64 bytes [ 0.414882] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 0.416010] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.417914] Switching to clocksource kvm-clock [ 0.418674] FS-Cache: Loaded [ 0.418869] CacheFiles: Loaded [ 0.419766] pnp: PnP ACPI init [ 0.420000] ACPI: bus type pnp registered [ 0.420000] pnp 00:00: [bus 00-ff] [ 0.420799] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.421789] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.422897] pnp 00:00: [io 0x0d00-0xffff window] [ 0.423992] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.425227] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 0.426512] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.427976] pnp 00:01: [io 0x0070-0x0071] [ 0.429008] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 0.430877] pnp 00:01: [irq 8] [ 0.431694] pnp 00:01: [io 0x0072-0x0077] [ 0.432796] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.434363] pnp 00:02: [io 0x0060] [ 0.435259] pnp 00:02: [io 0x0064] [ 0.436160] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 0.438004] pnp 00:02: [irq 1] [ 0.438892] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.440481] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 0.442395] pnp 00:03: [irq 12] [ 0.443301] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.444846] pnp 00:04: [io 0x03f2-0x03f5] [ 0.445837] pnp 00:04: [io 0x03f7] [ 0.446720] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 0.448589] pnp 00:04: [irq 6] [ 0.449403] pnp 00:04: [dma 2] [ 0.450267] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.451961] pnp 00:05: [io 0x0378-0x037f] [ 0.452991] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 0.454850] pnp 00:05: [irq 7] [ 0.455741] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.457451] pnp 00:06: [io 0x03f8-0x03ff] [ 0.458439] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 0.460406] pnp 00:06: [irq 4] [ 0.461495] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.464144] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.465662] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.468357] pnp: PnP ACPI: found 8 devices [ 0.469473] ACPI: ACPI bus type pnp unregistered [ 0.510290] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.511844] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.513714] NET: Registered protocol family 2 [ 0.515370] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.517340] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.519142] TCP: Hash tables configured (established 8192 bind 8192) [ 0.520956] TCP: reno registered [ 0.522000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.523660] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.525541] NET: Registered protocol family 1 [ 0.526868] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.528515] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.530098] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.531757] pci 0000:00:02.0: Boot video device [ 0.533213] PCI: CLS 0 bytes, default 64 [ 0.534663] Trying to unpack rootfs image as initramfs... [ 1.429083] Freeing initrd memory: 25284k freed [ 1.436677] kvm: no hardware support [ 1.438310] apm: BIOS not found. [ 1.439614] NatSemi SCx200 Driver [ 1.441463] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.451720] VFS: Disk quotas dquot_6.5.2 [ 1.453022] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.455845] ROMFS MTD (C) 2007 Red Hat, Inc. [ 1.457233] QNX4 filesystem 0.2.3 registered. [ 1.458458] SGI XFS with security attributes, realtime, no debug enabled [ 1.462038] alg: No test for cipher_null (cipher_null-generic) [ 1.463708] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 1.465390] alg: No test for compress_null (compress_null-generic) [ 1.467075] alg: No test for digest_null (digest_null-generic) [ 1.472632] alg: No test for fcrypt (fcrypt-generic) [ 1.478055] alg: No test for stdrng (krng) [ 1.479245] NET: Registered protocol family 38 [ 1.480655] Key type asymmetric registered [ 1.482095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.484325] io scheduler noop registered (default) [ 1.485713] io scheduler deadline registered [ 1.487174] io scheduler cfq registered [ 1.488464] xz_dec_test: module loaded [ 1.489637] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 1.492662] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.494226] cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8 [ 1.496086] ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 [ 1.501369] GHES: HEST is not enabled! [ 1.502566] ERST DBG: ERST support is disabled. [ 1.503956] isapnp: Scanning for PnP cards... [ 1.871479] isapnp: No Plug & Play device found [ 1.872455] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.895101] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.897879] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 1.899563] Real Time Clock Driver v1.12b [ 1.900781] Non-volatile memory driver v1.3 [ 1.901968] toshiba: not a supported Toshiba laptop [ 1.903322] scx200_gpio: no SCx200 gpio present [ 1.904667] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing [ 1.906415] platform pc8736x_gpio.0: no device found [ 1.907761] nsc_gpio initializing [ 1.908799] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 1.910202] SyncLink PC Card driver $Revision: 4.34 $, tty major#246 [ 1.911743] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.914107] Hangcheck: Using getrawmonotonic(). [ 1.919266] brd: module loaded [ 1.920269] HP CISS Driver (v 3.6.26) [ 1.921798] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 1.921933] Floppy drive(s): fd0 is 1.44M [ 1.924762] Phantom Linux Driver, version n0.9.8, init OK [ 1.926254] i2c-core: driver [tsl2550] using legacy suspend method [ 1.927726] i2c-core: driver [tsl2550] using legacy resume method [ 1.929326] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 1.931520] i2c-core: driver [fsa9480] using legacy suspend method [ 1.933166] i2c-core: driver [fsa9480] using legacy resume method [ 1.934967] Driver for timberdale has been successfully registered. [ 1.936750] Uniform Multi-Platform E-IDE driver [ 1.938431] ide-gd driver 1.18 [ 1.939591] hp_sw: device handler registered [ 1.940864] emc: device handler registered [ 1.942044] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.943762] osst :I: Tape driver with OnStream support version 0.99.4 [ 1.943762] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 1.944720] FDC 0 is a S82078B [ 1.948582] SCSI Media Changer driver v0.25 [ 1.950003] mkiss: AX.25 Multikiss, Hans Albas PE1AYX [ 1.951379] YAM driver version 0.8 by F1OAT/F6FBB [ 1.953696] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 1.953696] baycom_ser_fdx: version 0.10 [ 1.957332] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA [ 1.958862] hdlcdrv: version 0.8 [ 1.959832] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA [ 1.959832] baycom_ser_hdx: version 0.10 [ 1.963566] I2O subsystem v1.325 [ 1.964607] i2o: max drivers = 8 [ 1.965851] I2O Bus Adapter OSM v1.317 [ 1.966950] I2O Block Device OSM v1.325 [ 1.968520] I2O SCSI Peripheral OSM v1.316 [ 1.969717] Fusion MPT base driver 3.04.20 [ 1.970876] Copyright (c) 1999-2008 LSI Corporation [ 1.972297] Fusion MPT FC Host driver 3.04.20 [ 1.973958] Databook TCIC-2 PCMCIA probe: not found. [ 1.975483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.977182] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 [ 1.978787] uhci_hcd: USB Universal Host Controller Interface driver [ 1.980637] driver u132_hcd [ 1.981731] usbcore: registered new interface driver usblp [ 1.983202] usbcore: registered new interface driver usbtmc [ 1.984730] usbcore: registered new interface driver uas [ 1.986335] Initializing USB Mass Storage driver... [ 1.987672] usbcore: registered new interface driver usb-storage [ 1.989283] USB Mass Storage support registered. [ 1.990564] usbcore: registered new interface driver ums-alauda [ 1.992169] usbcore: registered new interface driver ums-cypress [ 1.993730] usbcore: registered new interface driver ums-datafab [ 1.995214] usbcore: registered new interface driver ums-freecom [ 1.996784] usbcore: registered new interface driver ums-jumpshot [ 1.998314] usbcore: registered new interface driver ums-onetouch [ 1.999859] usbcore: registered new interface driver ums-sddr55 [ 2.001414] usbcore: registered new interface driver ums-usbat [ 2.002916] usbcore: registered new interface driver microtekX6 [ 2.004582] usbcore: registered new interface driver usbserial [ 2.006115] usbcore: registered new interface driver usbserial_generic [ 2.007780] usbserial: USB Serial support registered for generic [ 2.022598] usbcore: registered new interface driver aircable [ 2.024177] usbserial: USB Serial support registered for aircable [ 2.025755] usbcore: registered new interface driver ch341 [ 2.027170] usbserial: USB Serial support registered for ch341-uart [ 2.028789] usbcore: registered new interface driver cyberjack [ 2.030294] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 2.032675] usbcore: registered new interface driver cypress_m8 [ 2.034241] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 2.036293] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 2.038350] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 2.040458] usbcore: registered new interface driver digi_acceleport [ 2.042119] usbserial: USB Serial support registered for Digi 2 port USB adapter [ 2.044137] usbserial: USB Serial support registered for Digi 4 port USB adapter [ 2.046207] usbcore: registered new interface driver io_edgeport [ 2.047771] usbserial: USB Serial support registered for Edgeport 2 port adapter [ 2.049924] usbserial: USB Serial support registered for Edgeport 4 port adapter [ 2.052046] usbserial: USB Serial support registered for Edgeport 8 port adapter [ 2.054174] usbserial: USB Serial support registered for EPiC device [ 2.055823] usbcore: registered new interface driver io_ti [ 2.057370] usbserial: USB Serial support registered for Edgeport TI 1 port adapter [ 2.059517] usbserial: USB Serial support registered for Edgeport TI 2 port adapter [ 2.061659] usbcore: registered new interface driver empeg [ 2.063167] usbserial: USB Serial support registered for empeg [ 2.064764] usbcore: registered new interface driver ftdi_sio [ 2.066274] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.068377] usbcore: registered new interface driver funsoft [ 2.069907] usbserial: USB Serial support registered for funsoft [ 2.071476] usbcore: registered new interface driver ipaq [ 2.072959] usbserial: USB Serial support registered for PocketPC PDA [ 2.074617] usbcore: registered new interface driver ipw [ 2.076049] usbserial: USB Serial support registered for IPWireless converter [ 2.077698] usbcore: registered new interface driver ir_usb [ 2.079187] usbserial: USB Serial support registered for IR Dongle [ 2.080940] usbcore: registered new interface driver kl5kusb105 [ 2.082565] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 2.084653] usbcore: registered new interface driver mos7720 [ 2.086148] usbserial: USB Serial support registered for Moschip 2 port adapter [ 2.088241] usbcore: registered new interface driver navman [ 2.089679] usbserial: USB Serial support registered for navman [ 2.091220] usbcore: registered new interface driver option [ 2.092844] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.094654] usbcore: registered new interface driver oti6858 [ 2.096141] usbserial: USB Serial support registered for oti6858 [ 2.097636] usbcore: registered new interface driver qcaux [ 2.099211] usbserial: USB Serial support registered for qcaux [ 2.100798] usbcore: registered new interface driver quatech2 [ 2.102284] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 2.104640] usbcore: registered new interface driver safe_serial [ 2.106225] usbserial: USB Serial support registered for safe_serial [ 2.107853] usbcore: registered new interface driver ssu100 [ 2.109314] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 2.111524] usbcore: registered new interface driver ti_usb_3410_5052 [ 2.113240] usbserial: USB Serial support registered for TI USB 3410 1 port adapter [ 2.115213] usbserial: USB Serial support registered for TI USB 5052 2 port adapter [ 2.117354] usbcore: registered new interface driver visor [ 2.118800] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 2.120925] usbserial: USB Serial support registered for Sony Clie 5.0 [ 2.122555] usbserial: USB Serial support registered for Sony Clie 3.5 [ 2.124221] usbcore: registered new interface driver whiteheat [ 2.125781] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 2.128246] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 2.130399] usbcore: registered new interface driver zte_ev [ 2.131893] usbserial: USB Serial support registered for zte_ev [ 2.133499] usbcore: registered new interface driver adutux [ 2.135187] usbcore: registered new interface driver appledisplay [ 2.136774] usbcore: registered new interface driver cypress_cy7c63 [ 2.138392] usbcore: registered new interface driver cytherm [ 2.139885] usbcore: registered new interface driver emi26 - firmware loader [ 2.141741] usbcore: registered new interface driver emi62 - firmware loader [ 2.143538] driver ftdi-elan [ 2.144837] usbcore: registered new interface driver ftdi-elan [ 2.146438] usbcore: registered new interface driver isight_firmware [ 2.148118] usbcore: registered new interface driver usblcd [ 2.149648] usbcore: registered new interface driver usbled [ 2.151163] usbcore: registered new interface driver legousbtower [ 2.152797] usbcore: registered new interface driver usbtest [ 2.154245] usbcore: registered new interface driver trancevibrator [ 2.155842] usbcore: registered new interface driver usbsevseg [ 2.157412] usbcore: registered new interface driver yurex [ 2.159109] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.162347] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.163839] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.240635] mousedev: PS/2 mouse device common for all mice [ 2.242486] usbcore: registered new interface driver bcm5974 [ 2.244199] logibm.c: Didn't find Logitech busmouse at 0x23c [ 2.246340] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.248986] usbcore: registered new interface driver synaptics_usb [ 2.251660] usbcore: registered new interface driver aiptek [ 2.253186] usbcore: registered new interface driver hanwang [ 2.254733] usbcore: registered new interface driver kbtab [ 2.258552] usbcore: registered new interface driver wacom [ 2.260052] i2c /dev entries driver [ 2.261748] i2c-parport-light: adapter type unspecified [ 2.263247] scx200_acb: NatSemi SCx200 ACCESS.bus Driver [ 2.264783] scx200_i2c: NatSemi SCx200 I2C Driver [ 2.266222] scx200_i2c: no SCx200 gpio pins available [ 2.268159] i2c-core: driver [adv7180] using legacy suspend method [ 2.269802] i2c-core: driver [adv7180] using legacy resume method [ 2.272025] usbcore: registered new interface driver ati_remote [ 2.273669] usbcore: registered new interface driver imon [ 2.275199] usbcore: registered new interface driver redrat3 [ 2.276719] usbcore: registered new interface driver streamzap [ 2.278289] Registered IR keymap rc-empty [ 2.279624] input: rc-core loopback device as /devices/virtual/rc/rc0/input1 [ 2.281613] rc0: rc-core loopback device as /devices/virtual/rc/rc0 [ 2.283484] usbcore: registered new interface driver iguanair [ 2.285016] Zoran MJPEG board driver version 0.10.1 [ 2.286407] Linux video codec intermediate layer: v0.2 [ 2.287753] meye: using 2 buffers with 600k (1200k total) for capture [ 2.289436] gspca_main: v2.14.0 registered [ 2.290631] usbcore: registered new interface driver benq [ 2.292139] usbcore: registered new interface driver conex [ 2.293619] usbcore: registered new interface driver cpia1 [ 2.295072] usbcore: registered new interface driver finepix [ 2.296638] usbcore: registered new interface driver jeilinj [ 2.298111] usbcore: registered new interface driver jl2005bcd [ 2.299632] usbcore: registered new interface driver konica [ 2.301134] usbcore: registered new interface driver mars [ 2.302610] usbcore: registered new interface driver nw80x [ 2.304124] usbcore: registered new interface driver ov519 [ 2.305610] usbcore: registered new interface driver ov534 [ 2.307097] usbcore: registered new interface driver pac207 [ 2.308622] usbcore: registered new interface driver sn9c2028 [ 2.310153] usbcore: registered new interface driver gspca_sn9c20x [ 2.311808] usbcore: registered new interface driver sonixb [ 2.313347] usbcore: registered new interface driver sonixj [ 2.314743] usbcore: registered new interface driver spca501 [ 2.316250] usbcore: registered new interface driver spca505 [ 2.317735] usbcore: registered new interface driver spca1528 [ 2.319261] usbcore: registered new interface driver sq905 [ 2.320778] usbcore: registered new interface driver sq930x [ 2.322281] usbcore: registered new interface driver stk014 [ 2.323786] usbcore: registered new interface driver tv8532 [ 2.325271] usbcore: registered new interface driver vc032x [ 2.326744] usbcore: registered new interface driver xirlink-cit [ 2.328318] usbcore: registered new interface driver ALi m5602 [ 2.329868] cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1 [ 2.331530] usbcore: registered new interface driver cpia2 [ 2.333073] usbcore: registered new interface driver hdpvr [ 2.334534] usbcore: registered new interface driver usbvision [ 2.336067] USBVision USB Video Device Driver for Linux : 0.9.11 [ 2.337631] usbcore: registered new interface driver tm6000 [ 2.339077] usbcore: registered new interface driver em28xx [ 2.340571] Em28xx: Initialized (Em28xx Input Extension) extension [ 2.342169] radio-sf16fmi: no cards found [ 2.436107] tsc: Refined TSC clocksource calibration: 2693.500 MHz [ 2.488865] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 8.672602] radio-aimslab.0: Initialized radio card AIMSlab RadioTrack/RadioReveal on port 0x30f [ 8.674839] usbcore: registered new interface driver radio-si470x [ 8.676242] usbcore: registered new interface driver radio-keene [ 8.677645] Driver for 1-wire Dallas network protocol. [ 8.678935] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 8.681047] f71882fg: Not a Fintek device [ 8.682069] f71882fg: Not a Fintek device [ 8.683771] EISA: Probing bus 0 at eisa.0 [ 8.698089] cpuidle: using governor ladder [ 8.699380] sdhci: Secure Digital Host Controller Interface driver [ 8.701042] sdhci: Copyright(c) Pierre Ossman [ 8.703337] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 [ 8.705230] usbcore: registered new interface driver vub300 [ 8.707462] ledtrig-cpu: registered to indicate activity on CPUs [ 8.709065] EFI Variables Facility v0.08 2004-May-17 [ 8.710642] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.712922] usbip_core: USB/IP Core v1.0.0 [ 8.714113] rts_pstor: Initializing Realtek PCIE storage driver... [ 8.715792] usbcore: registered new interface driver tranzport [ 8.717444] usbcore: registered new interface driver alphatrack [ 8.719420] Error: Driver 'adt7410' is already registered, aborting... [ 8.721890] Loading crystalhd 0.9.27 [ 8.724342] input: Speakup as /devices/virtual/input/input3 [ 8.726175] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 8.727974] speakup 3.1.6: initialized [ 8.729167] synth name on entry is: (null) [ 8.730678] ozwpan ozwpan: Ozmo Devices WPAN [ 8.731985] ozwpan ozwpan: new USB bus registered, assigned bus number 1 [ 8.733850] usb usb1: default language 0x0409 [ 8.735101] usb usb1: udev 1, busnum 1, minor = 0 [ 8.736465] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.738257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.740458] usb usb1: Product: Ozmo Devices WPAN [ 8.741735] usb usb1: Manufacturer: Linux 3.7.0-rc1-bisect-next-20121016 Ozmo WPAN [ 8.743982] usb usb1: SerialNumber: ozwpan [ 8.745513] usb usb1: usb_probe_device [ 8.746643] usb usb1: configuration #1 chosen from 1 choice [ 8.748217] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 8.749759] hub 1-0:1.0: usb_probe_interface [ 8.751029] hub 1-0:1.0: usb_probe_interface - got id [ 8.752553] hub 1-0:1.0: USB hub found [ 8.753721] hub 1-0:1.0: 8 ports detected [ 8.754875] hub 1-0:1.0: standalone hub [ 8.756088] hub 1-0:1.0: individual port power switching [ 8.757580] hub 1-0:1.0: global over-current protection [ 8.759084] hub 1-0:1.0: power on to power good time: 0ms [ 8.760698] hub 1-0:1.0: 200mA bus power budget for each child [ 8.762315] hub 1-0:1.0: local power source is good [ 8.763747] hub 1-0:1.0: no over-current condition exists [ 8.765686] hub 1-0:1.0: enabling power on all ports [ 8.767327] usbcore: registered new interface driver cedusb [ 8.769194] compal_laptop: Motherboard not recognized (You could try the module's force-parameter) [ 8.771761] hdaps: supported laptop not found! [ 8.773124] hdaps: driver init failed (ret=-19)! [ 8.774786] FUJ02B1: call_fext_func: FUNC interface is not present [ 8.776481] fujitsu_laptop: driver 0.6.0 successfully loaded [ 8.778119] fujitsu_tablet: Unknown (using defaults) [ 8.779722] intel_oaktrail: Platform not recognized (You could try the module's force-parameter) [ 8.782416] NET: Registered protocol family 26 [ 8.784627] IPv4 over IPv4 tunneling driver [ 8.786203] gre: GRE over IPv4 demultiplexor driver [ 8.787484] ip_gre: GRE over IPv4 tunneling driver [ 8.789131] IPv4 over IPSec tunneling driver [ 8.790679] TCP: bic registered [ 8.792317] NET: Registered protocol family 10 [ 8.794613] ip6_gre: GRE over IPv6 tunneling driver [ 8.796518] NET: Registered protocol family 4 [ 8.799925] NET: Registered protocol family 11 [ 8.801340] NET: Registered protocol family 3 [ 8.802597] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team [ 8.805231] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes [ 8.806924] NET: Registered protocol family 12 [ 8.808367] NET: Registered protocol family 35 [ 8.809871] NET: Registered protocol family 37 [ 8.811206] Key type dns_resolver registered [ 8.820716] batman_adv: B.A.T.M.A.N. advanced 2012.4.0 (compatibility version 14) loaded [ 8.823248] openvswitch: Open vSwitch switching datapath [ 8.825733] [ 8.825733] printing PIC contents [ 8.827413] ... PIC IMR: ffff [ 8.828496] ... PIC IRR: 1053 [ 8.829566] ... PIC ISR: 0000 [ 8.830571] ... PIC ELCR: 0c00 [ 8.831598] printing local APIC contents on CPU#0/0: [ 8.833133] ... APIC ID: 00000000 (0) [ 8.833553] ... APIC VERSION: 00050014 [ 8.833553] ... APIC TASKPRI: 00000000 (00) [ 8.833553] ... APIC PROCPRI: 00000000 [ 8.833553] ... APIC LDR: 01000000 [ 8.833553] ... APIC DFR: ffffffff [ 8.833553] ... APIC SPIV: 000001ff [ 8.833553] ... APIC ISR field: [ 8.833553] 0000000000000000000000000000000000000000000000000000000000000000 [ 8.833553] ... APIC TMR field: [ 8.833553] 0000000000000000000000000000000000000000000000000000000000000000 [ 8.833553] ... APIC IRR field: [ 8.833553] 0000000000000000000000000000000000000000000000000000000000008000 [ 8.833553] ... APIC ESR: 00000000 [ 8.833553] ... APIC ICR: 000008fd [ 8.833553] ... APIC ICR2: 02000000 [ 8.833553] ... APIC LVTT: 000000ef [ 8.833553] ... APIC LVTPC: 00010000 [ 8.833553] ... APIC LVT0: 00010700 [ 8.833553] ... APIC LVT1: 00000400 [ 8.833553] ... APIC LVTERR: 000000fe [ 8.833553] ... APIC TMICT: 000254c5 [ 8.833553] ... APIC TMCCT: 00000000 [ 8.833553] ... APIC TDCR: 00000003 [ 8.833553] [ 8.866904] number of MP IRQ sources: 15. [ 8.868194] number of IO-APIC #2 registers: 24. [ 8.869488] testing the IO APIC....................... [ 8.870969] IO APIC #2...... [ 8.871860] .... register #00: 00000000 [ 8.873140] ....... : physical APIC id: 00 [ 8.874406] ....... : Delivery Type: 0 [ 8.875622] ....... : LTS : 0 [ 8.876922] .... register #01: 00170011 [ 8.878139] ....... : max redirection entries: 17 [ 8.879553] ....... : PRQ implemented: 0 [ 8.880890] ....... : IO APIC version: 11 [ 8.882223] .... register #02: 00000000 [ 8.883400] ....... : arbitration: 00 [ 8.884684] .... IRQ redirection table: [ 8.885758] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 8.887329] 00 00 1 0 0 0 0 0 0 00 [ 8.889042] 01 03 0 0 0 0 0 1 1 31 [ 8.890687] 02 03 0 0 0 0 0 1 1 30 [ 8.892422] 03 03 0 0 0 0 0 1 1 33 [ 8.894061] 04 03 1 0 0 0 0 1 1 34 [ 8.895688] 05 03 1 1 0 0 0 1 1 35 [ 8.897368] 06 03 0 0 0 0 0 1 1 36 [ 8.898964] 07 03 0 0 0 0 0 1 1 37 [ 8.900664] 08 03 0 0 0 0 0 1 1 38 [ 8.902297] 09 03 0 1 0 0 0 1 1 39 [ 8.903901] 0a 03 1 1 0 0 0 1 1 3A [ 8.905622] 0b 03 1 1 0 0 0 1 1 3B [ 8.907275] 0c 03 0 0 0 0 0 1 1 3C [ 8.908958] 0d 03 0 0 0 0 0 1 1 3D [ 8.910614] 0e 03 0 0 0 0 0 1 1 3E [ 8.912339] 0f 03 0 0 0 0 0 1 1 3F [ 8.913937] 10 00 1 0 0 0 0 0 0 00 [ 8.915583] 11 00 1 0 0 0 0 0 0 00 [ 8.917303] 12 00 1 0 0 0 0 0 0 00 [ 8.918841] 13 00 1 0 0 0 0 0 0 00 [ 8.920535] 14 00 1 0 0 0 0 0 0 00 [ 8.922211] 15 00 1 0 0 0 0 0 0 00 [ 8.923806] 16 00 1 0 0 0 0 0 0 00 [ 8.925488] 17 00 1 0 0 0 0 0 0 00 [ 8.927096] IRQ to pin mappings: [ 8.928237] IRQ0 -> 0:2 [ 8.929394] IRQ1 -> 0:1 [ 8.930547] IRQ3 -> 0:3 [ 8.931680] IRQ4 -> 0:4 [ 8.932879] IRQ5 -> 0:5 [ 8.934006] IRQ6 -> 0:6 [ 8.935045] IRQ7 -> 0:7 [ 8.936150] IRQ8 -> 0:8 [ 8.937278] IRQ9 -> 0:9 [ 8.938420] IRQ10 -> 0:10 [ 8.939596] IRQ11 -> 0:11 [ 8.940841] IRQ12 -> 0:12 [ 8.942024] IRQ13 -> 0:13 [ 8.943226] IRQ14 -> 0:14 [ 8.944470] IRQ15 -> 0:15 [ 8.945629] .................................... done. [ 8.947136] Using IPI No-Shortcut mode [ 8.948663] registered taskstats version 1 [ 8.958246] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 [ 8.959864] Key type trusted registered [ 8.961443] Key type encrypted registered [ 8.963763] IMA: No TPM chip found, activating TPM-bypass! [ 8.969163] ### of_selftest(): No testcase data in device tree; not running tests [ 8.971662] Freeing unused kernel memory: 556k freed [ 8.973511] Write protecting the kernel text: 6824k [ 8.974955] Write protecting the kernel read-only data: 3212k [ 9.043042] BUG: unable to handle kernel paging request at 6b6b6be3 [ 9.044021] IP: [] mutex_unlock+0x3/0x16 [ 9.044021] *pde = 00000000 [ 9.044021] Oops: 0002 [#1] SMP [ 9.044021] Pid: 1, comm: init Not tainted 3.7.0-rc1-bisect-next-20121016 #24 Bochs Bochs [ 9.044021] EIP: 0060:[] EFLAGS: 00010212 CPU: 0 [ 9.044021] EIP is at mutex_unlock+0x3/0x16 [ 9.044021] EAX: 6b6b6bd3 EBX: cd412d10 ECX: cd89b998 EDX: 0000a068 [ 9.044021] ESI: 00000000 EDI: cf8f3100 EBP: cd84fe04 ESP: cd84fe04 [ 9.044021] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 9.044021] CR0: 80050033 CR2: 6b6b6be3 CR3: 0f882000 CR4: 00000690 [ 9.044021] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 9.044021] DR6: ffff0ff0 DR7: 00000400 [ 9.044021] Process init (pid: 1, ti=cd84e000 task=cd850000 task.ti=cd84e000) [ 9.044021] Stack: [ 9.044021] cd84fe4c c10c2fbb 0000a068 cd84fecc cd84fe24 c11c40ff 00000000 00000000 [ 9.044021] 507d7909 0244c7b0 507d7909 0244c7b0 507d7909 0244c7b0 cf8f3100 cd89b9a4 [ 9.044021] cd412d10 cf8f3100 cd84fe68 c10caf7f 00008060 cf8f3100 cd84ff00 00000000 [ 9.044021] Call Trace: [ 9.044021] [] do_truncate+0x6d/0x77 [ 9.044021] [] ? ima_get_action+0x1f/0x24 [ 9.044021] [] handle_truncate+0x73/0x84 [ 9.044021] [] do_last.isra.27+0x445/0x502 [ 9.044021] [] path_openat.isra.28+0x93/0x340 [ 9.044021] [] ? __slab_alloc.constprop.66+0x258/0x27d [ 9.044021] [] do_filp_open+0x21/0x5d [ 9.044021] [] ? __alloc_fd+0x36/0xdc [ 9.044021] [] do_sys_open+0xfa/0x173 [ 9.044021] [] sys_open+0x21/0x29 [ 9.044021] [] sysenter_do_call+0x12/0x2c [ 9.044021] Code: b8 13 91 8c c1 ba 55 00 00 00 e8 aa 98 9c ff 89 d8 f0 ff 08 79 05 e8 ce 00 00 00 64 a1 88 17 af c1 89 43 10 59 5b 5d c3 55 89 e5 40 10 00 00 00 00 f0 ff 00 7f 05 e8 02 00 00 00 5d c3 55 89 [ 9.044021] EIP: [] mutex_unlock+0x3/0x16 SS:ESP 0068:cd84fe04 [ 9.044021] CR2: 000000006b6b6be3 [ 9.120800] ---[ end trace bbdf2c495901f8f4 ]--- [ 9.122577] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 9.122577]