| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1350474822-7315-3-git-send-email-vinholikatti@gmail.com>
Date: Wed, 17 Oct 2012 17:23:40 +0530
From: Vinayak Holikatti <vinholikatti@...il.com>
To: James.Bottomley@...senpartnership.com
Cc: linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
patches@...aro.org, linux-samsung-soc@...r.kernel.org,
arnd@...aro.org, girish.shivananjappa@...aro.org,
saugata.das@...aro.org, vishak.g@...sung.com, venkat@...aro.org,
k.rajesh@...sung.com, dsaxena@...aro.org, ilho215.lee@...sung.com,
nala.la@...sung.com, sreekumar.c@...sung.com,
Vinayak Holikatti <vinholikatti@...il.com>,
Santosh Yaraganavi <santoshsy@...il.com>
Subject: [PATCH V4 2/4] [SCSI] drivers/scsi/ufs: Separate PCI code into glue driver
This patch separates PCI code from ufshcd.c and makes it as a
core driver module and adds a new file ufshcd-pci.c as PCI glue
driver.
Reviewed-by: Arnd Bergmann <arnd@...db.de>
Reviewed-by: Namjae Jeon <linkinjeon@...il.com>
Signed-off-by: Vinayak Holikatti <vinholikatti@...il.com>
Signed-off-by: Santosh Yaraganavi <santoshsy@...il.com>
---
drivers/scsi/ufs/Kconfig | 26 +++-
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufshcd-pci.c | 211 +++++++++++++++++++++++++++
drivers/scsi/ufs/ufshcd.c | 323 +----------------------------------------
drivers/scsi/ufs/ufshcd.h | 200 +++++++++++++++++++++++++
5 files changed, 437 insertions(+), 324 deletions(-)
create mode 100644 drivers/scsi/ufs/ufshcd-pci.c
create mode 100644 drivers/scsi/ufs/ufshcd.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 9c84569..d77ae97 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -33,7 +33,27 @@
# this program.
config SCSI_UFSHCD
- tristate "Universal Flash Storage host controller driver"
- depends on PCI && SCSI
+ tristate "Universal Flash Storage Controller Driver Core"
+ depends on SCSI
---help---
- This is a generic driver which supports PCIe UFS Host controllers.
+ This selects the support for UFS devices in Linux, say Y and make
+ sure that you know the name of your UFS host adapter (the card
+ inside your computer that "speaks" the UFS protocol, also
+ called UFS Host Controller), because you will be asked for it.
+ The module will be called ufshcd.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/ufs.txt>.
+ However, do not compile this as a module if your root file system
+ (the one containing the directory /) is located on a UFS device.
+
+config SCSI_UFSHCD_PCI
+ tristate "PCI bus based UFS Controller support"
+ depends on SCSI_UFSHCD && PCI
+ ---help---
+ This selects the PCI UFS Host Controller Interface.
+ Most controllers found today are PCI devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index adf7895..9eda0df 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -1,2 +1,3 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
+obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
new file mode 100644
index 0000000..ba86b5e
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -0,0 +1,211 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd-pci.c
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@...sung.com>
+ * Vinayak Holikatti <h.vinayak@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#include "ufshcd.h"
+#include <linux/pci.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pci_suspend - suspend power management function
+ * @pdev: pointer to PCI device handle
+ * @state: power state
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ /*
+ * TODO:
+ * 1. Call ufshcd_suspend
+ * 2. Do bus specific power management
+ */
+
+ return -ENOSYS;
+}
+
+/**
+ * ufshcd_pci_resume - resume power management function
+ * @pdev: pointer to PCI device handle
+ *
+ * Returns -ENOSYS
+ */
+static int ufshcd_pci_resume(struct pci_dev *pdev)
+{
+ /*
+ * TODO:
+ * 1. Call ufshcd_resume.
+ * 2. Do bus specific wake up
+ */
+
+ return -ENOSYS;
+}
+#endif /* CONFIG_PM */
+
+/**
+ * ufshcd_pci_shutdown - main function to put the controller in reset state
+ * @pdev: pointer to PCI device handle
+ */
+static void ufshcd_pci_shutdown(struct pci_dev *pdev)
+{
+ ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
+}
+
+/**
+ * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
+ * data structure memory
+ * @pdev - pointer to PCI handle
+ */
+static void ufshcd_pci_remove(struct pci_dev *pdev)
+{
+ struct ufs_hba *hba = pci_get_drvdata(pdev);
+
+ free_irq(pdev->irq, hba);
+ ufshcd_remove(hba);
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ufshcd_set_dma_mask - Set dma mask based on the controller
+ * addressing capability
+ * @pdev: PCI device structure
+ *
+ * Returns 0 for success, non-zero for failure
+ */
+static int ufshcd_set_dma_mask(struct pci_dev *pdev)
+{
+ int err;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ return 0;
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ return err;
+}
+
+/**
+ * ufshcd_pci_probe - probe routine of the driver
+ * @pdev: pointer to PCI device handle
+ * @id: PCI device id
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct ufs_hba *hba;
+ void __iomem *mmio_base;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ goto out_error;
+ }
+
+ pci_set_master(pdev);
+
+
+ err = pci_request_regions(pdev, UFSHCD);
+ if (err < 0) {
+ dev_err(&pdev->dev, "request regions failed\n");
+ goto out_disable;
+ }
+
+ mmio_base = pci_ioremap_bar(pdev, 0);
+ if (!mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ err = ufshcd_set_dma_mask(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
+ if (err) {
+ dev_err(&pdev->dev, "%s:%d %sInitialization failed\n",
+ __FILE__, __LINE__, __func__);
+ goto out_iounmap;
+ }
+
+ pci_set_drvdata(pdev, hba);
+
+ return 0;
+
+out_iounmap:
+ iounmap(mmio_base);
+out_release_regions:
+ pci_release_regions(pdev);
+out_disable:
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+out_error:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
+ { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
+
+static struct pci_driver ufshcd_pci_driver = {
+ .name = UFSHCD,
+ .id_table = ufshcd_pci_tbl,
+ .probe = ufshcd_pci_probe,
+ .remove = __devexit_p(ufshcd_pci_remove),
+ .shutdown = ufshcd_pci_shutdown,
+#ifdef CONFIG_PM
+ .suspend = ufshcd_pci_suspend,
+ .resume = ufshcd_pci_resume,
+#endif
+};
+
+module_pci_driver(ufshcd_pci_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@...sung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@...sung.com>");
+MODULE_DESCRIPTION("PCI based UFS host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 2330da3..5d7bd47 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -33,35 +33,7 @@
* this program.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/bitops.h>
-
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_eh.h>
-
-#include "ufs.h"
-#include "ufshci.h"
-
-#define UFSHCD "ufshcd"
-#define UFSHCD_DRIVER_VERSION "0.1"
+#include "ufshcd.h"
enum {
UFSHCD_MAX_CHANNEL = 0,
@@ -92,121 +64,6 @@ enum {
};
/**
- * struct uic_command - UIC command structure
- * @command: UIC command
- * @argument1: UIC command argument 1
- * @argument2: UIC command argument 2
- * @argument3: UIC command argument 3
- * @cmd_active: Indicate if UIC command is outstanding
- * @result: UIC command result
- */
-struct uic_command {
- u32 command;
- u32 argument1;
- u32 argument2;
- u32 argument3;
- int cmd_active;
- int result;
-};
-
-/**
- * struct ufs_hba - per adapter private structure
- * @mmio_base: UFSHCI base register address
- * @ucdl_base_addr: UFS Command Descriptor base address
- * @utrdl_base_addr: UTP Transfer Request Descriptor base address
- * @utmrdl_base_addr: UTP Task Management Descriptor base address
- * @ucdl_dma_addr: UFS Command Descriptor DMA address
- * @utrdl_dma_addr: UTRDL DMA address
- * @utmrdl_dma_addr: UTMRDL DMA address
- * @host: Scsi_Host instance of the driver
- * @dev: device handle
- * @lrb: local reference block
- * @outstanding_tasks: Bits representing outstanding task requests
- * @outstanding_reqs: Bits representing outstanding transfer requests
- * @capabilities: UFS Controller Capabilities
- * @nutrs: Transfer Request Queue depth supported by controller
- * @nutmrs: Task Management Queue depth supported by controller
- * @active_uic_cmd: handle of active UIC command
- * @ufshcd_tm_wait_queue: wait queue for task management
- * @tm_condition: condition variable for task management
- * @ufshcd_state: UFSHCD states
- * @int_enable_mask: Interrupt Mask Bits
- * @uic_workq: Work queue for UIC completion handling
- * @feh_workq: Work queue for fatal controller error handling
- * @errors: HBA errors
- */
-struct ufs_hba {
- void __iomem *mmio_base;
-
- /* Virtual memory reference */
- struct utp_transfer_cmd_desc *ucdl_base_addr;
- struct utp_transfer_req_desc *utrdl_base_addr;
- struct utp_task_req_desc *utmrdl_base_addr;
-
- /* DMA memory reference */
- dma_addr_t ucdl_dma_addr;
- dma_addr_t utrdl_dma_addr;
- dma_addr_t utmrdl_dma_addr;
-
- struct Scsi_Host *host;
- struct device *dev;
-
- struct ufshcd_lrb *lrb;
-
- unsigned long outstanding_tasks;
- unsigned long outstanding_reqs;
-
- u32 capabilities;
- int nutrs;
- int nutmrs;
- u32 ufs_version;
-
- struct uic_command active_uic_cmd;
- wait_queue_head_t ufshcd_tm_wait_queue;
- unsigned long tm_condition;
-
- u32 ufshcd_state;
- u32 int_enable_mask;
-
- /* Work Queues */
- struct work_struct uic_workq;
- struct work_struct feh_workq;
-
- /* HBA Errors */
- u32 errors;
-};
-
-/**
- * struct ufshcd_lrb - local reference block
- * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_cmd_ptr: UCD address of the command
- * @ucd_rsp_ptr: Response UPIU address for this command
- * @ucd_prdt_ptr: PRDT address of the command
- * @cmd: pointer to SCSI command
- * @sense_buffer: pointer to sense buffer address of the SCSI command
- * @sense_bufflen: Length of the sense buffer
- * @scsi_status: SCSI status of the command
- * @command_type: SCSI, UFS, Query.
- * @task_tag: Task tag of the command
- * @lun: LUN of the command
- */
-struct ufshcd_lrb {
- struct utp_transfer_req_desc *utr_descriptor_ptr;
- struct utp_upiu_cmd *ucd_cmd_ptr;
- struct utp_upiu_rsp *ucd_rsp_ptr;
- struct ufshcd_sg_entry *ucd_prdt_ptr;
-
- struct scsi_cmnd *cmd;
- u8 *sense_buffer;
- unsigned int sense_bufflen;
- int scsi_status;
-
- int command_type;
- int task_tag;
- unsigned int lun;
-};
-
-/**
* ufshcd_get_ufs_version - Get the UFS version supported by the HBA
* @hba - Pointer to adapter instance
*
@@ -419,15 +276,6 @@ static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba)
}
/**
- * ufshcd_hba_stop - Send controller to reset state
- * @hba: per adapter instance
- */
-static inline void ufshcd_hba_stop(struct ufs_hba *hba)
-{
- writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
-}
-
-/**
* ufshcd_hba_start - Start controller initialization sequence
* @hba: per adapter instance
*/
@@ -1676,15 +1524,6 @@ static struct scsi_host_template ufshcd_driver_template = {
};
/**
- * ufshcd_pci_shutdown - main function to put the controller in reset state
- * @pdev: pointer to PCI device handle
- */
-static void ufshcd_pci_shutdown(struct pci_dev *pdev)
-{
- ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
-}
-
-/**
* ufshcd_suspend - suspend power management function
* @hba: per adapter instance
* @state: power state
@@ -1727,43 +1566,6 @@ int ufshcd_resume(struct ufs_hba *hba)
}
EXPORT_SYMBOL_GPL(ufshcd_resume);
-#ifdef CONFIG_PM
-/**
- * ufshcd_pci_suspend - suspend power management function
- * @pdev: pointer to PCI device handle
- * @state: power state
- *
- * Returns -ENOSYS
- */
-static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- /*
- * TODO:
- * 1. Call ufshcd_suspend
- * 2. Do bus specific power management
- */
-
- return -ENOSYS;
-}
-
-/**
- * ufshcd_pci_resume - resume power management function
- * @pdev: pointer to PCI device handle
- *
- * Returns -ENOSYS
- */
-static int ufshcd_pci_resume(struct pci_dev *pdev)
-{
- /*
- * TODO:
- * 1. Call ufshcd_resume.
- * 2. Do bus specific wake up
- */
-
- return -ENOSYS;
-}
-#endif /* CONFIG_PM */
-
/**
* ufshcd_hba_free - free allocated memory for
* host memory space data structures
@@ -1794,43 +1596,6 @@ void ufshcd_remove(struct ufs_hba *hba)
EXPORT_SYMBOL_GPL(ufshcd_remove);
/**
- * ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
- * data structure memory
- * @pdev - pointer to PCI handle
- */
-static void ufshcd_pci_remove(struct pci_dev *pdev)
-{
- struct ufs_hba *hba = pci_get_drvdata(pdev);
-
- free_irq(pdev->irq, hba);
- ufshcd_remove(hba);
- pci_release_regions(pdev);
- pci_set_drvdata(pdev, NULL);
- pci_clear_master(pdev);
- pci_disable_device(pdev);
-}
-
-/**
- * ufshcd_set_dma_mask - Set dma mask based on the controller
- * addressing capability
- * @pdev: PCI device structure
- *
- * Returns 0 for success, non-zero for failure
- */
-static int ufshcd_set_dma_mask(struct pci_dev *pdev)
-{
- int err;
-
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
- return 0;
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- return err;
-}
-
-/**
* ufshcd_init - Driver initialization routine
* @dev: pointer to device handle
* @hba_handle: driver private handle
@@ -1938,92 +1703,8 @@ out_error:
}
EXPORT_SYMBOL_GPL(ufshcd_init);
-/**
- * ufshcd_pci_probe - probe routine of the driver
- * @pdev: pointer to PCI device handle
- * @id: PCI device id
- *
- * Returns 0 on success, non-zero value on failure
- */
-static int __devinit
-ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct ufs_hba *hba;
- void __iomem *mmio_base;
- int err;
-
- err = pci_enable_device(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_device failed\n");
- goto out_error;
- }
-
- pci_set_master(pdev);
-
- err = pci_request_regions(pdev, UFSHCD);
- if (err < 0) {
- dev_err(&pdev->dev, "request regions failed\n");
- goto out_disable;
- }
-
- mmio_base = pci_ioremap_bar(pdev, 0);
- if (!mmio_base) {
- dev_err(&pdev->dev, "memory map failed\n");
- err = -ENOMEM;
- goto out_release_regions;
- }
-
- err = ufshcd_set_dma_mask(pdev);
- if (err) {
- dev_err(&pdev->dev, "set dma mask failed\n");
- goto out_iounmap;
- }
-
- err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
- if (err) {
- dev_err(&pdev->dev, "%s:%d %sInitialization failed\n",
- __FILE__, __LINE__, __func__);
- goto out_iounmap;
- }
-
- pci_set_drvdata(pdev, hba);
-
- return 0;
-
-out_iounmap:
- iounmap(mmio_base);
-out_release_regions:
- pci_release_regions(pdev);
-out_disable:
- pci_clear_master(pdev);
- pci_disable_device(pdev);
-out_error:
- return err;
-}
-
-static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
- { PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { } /* terminate list */
-};
-
-MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
-
-static struct pci_driver ufshcd_pci_driver = {
- .name = UFSHCD,
- .id_table = ufshcd_pci_tbl,
- .probe = ufshcd_pci_probe,
- .remove = __devexit_p(ufshcd_pci_remove),
- .shutdown = ufshcd_pci_shutdown,
-#ifdef CONFIG_PM
- .suspend = ufshcd_pci_suspend,
- .resume = ufshcd_pci_resume,
-#endif
-};
-
-module_pci_driver(ufshcd_pci_driver);
-
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@...sung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@...sung.com>");
-MODULE_DESCRIPTION("Generic UFS host controller driver");
+MODULE_DESCRIPTION("Generic Core UFS host controller driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
new file mode 100644
index 0000000..1829e93
--- /dev/null
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -0,0 +1,200 @@
+/*
+ * Universal Flash Storage Host controller driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd.h
+ * Copyright (C) 2011-2012 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@...sung.com>
+ * Vinayak Holikatti <h.vinayak@...sung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+
+#include <asm/irq.h>
+#include <asm/byteorder.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+
+#include "ufs.h"
+#include "ufshci.h"
+
+#define UFSHCD "ufshcd"
+#define UFSHCD_DRIVER_VERSION "0.2"
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @result: UIC command result
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ int result;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_cmd_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @cmd: pointer to SCSI command
+ * @sense_buffer: pointer to sense buffer address of the SCSI command
+ * @sense_bufflen: Length of the sense buffer
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_cmd *ucd_cmd_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ struct scsi_cmnd *cmd;
+ u8 *sense_buffer;
+ unsigned int sense_bufflen;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ unsigned int lun;
+};
+
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @active_uic_cmd: handle of active UIC command
+ * @ufshcd_tm_wait_queue: wait queue for task management
+ * @tm_condition: condition variable for task management
+ * @ufshcd_state: UFSHCD states
+ * @int_enable_mask: Interrupt Mask Bits
+ * @uic_workq: Work queue for UIC completion handling
+ * @feh_workq: Work queue for fatal controller error handling
+ * @errors: HBA errors
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct device *dev;
+
+ struct ufshcd_lrb *lrb;
+
+ unsigned long outstanding_tasks;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ unsigned int irq;
+ u32 ufs_version;
+
+ struct uic_command active_uic_cmd;
+ wait_queue_head_t ufshcd_tm_wait_queue;
+ unsigned long tm_condition;
+
+ u32 ufshcd_state;
+ u32 int_enable_mask;
+
+ /* Work Queues */
+ struct work_struct uic_workq;
+ struct work_struct feh_workq;
+
+ /* HBA Errors */
+ u32 errors;
+};
+
+int ufshcd_init(struct device *, struct ufs_hba ** , void __iomem * ,
+ unsigned int);
+void ufshcd_remove(struct ufs_hba *);
+
+/**
+ * ufshcd_hba_stop - Send controller to reset state
+ * @hba: per adapter instance
+ */
+static inline void ufshcd_hba_stop(struct ufs_hba *hba)
+{
+ writel(CONTROLLER_DISABLE, (hba->mmio_base + REG_CONTROLLER_ENABLE));
+}
+
+#endif /* End of Header */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists