lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1350477107-26512-6-git-send-email-stigge@antcom.de>
Date:	Wed, 17 Oct 2012 14:31:37 +0200
From:	Roland Stigge <stigge@...com.de>
To:	gregkh@...uxfoundation.org, grant.likely@...retlab.ca,
	linus.walleij@...aro.org, linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, w.sang@...gutronix.de,
	jbe@...gutronix.de, plagnioj@...osoft.com, highguy@...il.com,
	broonie@...nsource.wolfsonmicro.com, daniel-gl@....net,
	rmallon@...il.com
Cc:	Roland Stigge <stigge@...com.de>
Subject: [PATCH RFC 05/15 v5] gpio-max730x: Add block GPIO API

This patch adds block GPIO API support to the MAX730x driver.

Due to hardware constraints in this chip, simultaneous access to GPIO lines can
only be done in groups of 8: GPIOs 0-7, 8-15, 16-23, 24-27. However, setting
and clearing will be done at once.

Signed-off-by: Roland Stigge <stigge@...com.de>

---
 drivers/gpio/gpio-max730x.c |   61 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

--- linux-2.6.orig/drivers/gpio/gpio-max730x.c
+++ linux-2.6/drivers/gpio/gpio-max730x.c
@@ -146,6 +146,44 @@ static int max7301_get(struct gpio_chip
 	return level;
 }
 
+static unsigned long max7301_get_block(struct gpio_chip *chip,
+				       unsigned long mask)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	int i, j;
+	unsigned long result = 0;
+
+	for (i = 0; i < 4; i++) {
+		if ((mask >> (i * 8)) & 0xFF) { /* i/o only if necessary */
+			u8 in_level = ts->read(ts->dev, 0x44 + i * 8);
+			u8 in_mask = 0;
+			u8 out_level = (ts->out_level >> (i * 8 + 4)) & 0xFF;
+			u8 out_mask = 0;
+
+			for (j = 0; j < 8; j++) {
+				int offset = 4 + i * 8 + j;
+				int config = (ts->port_config[offset >> 2] >>
+					      ((offset & 3) << 1)) &
+					PIN_CONFIG_MASK;
+
+				switch (config) {
+				case PIN_CONFIG_OUT:
+					out_mask |= BIT(j);
+					break;
+				case PIN_CONFIG_IN_WO_PULLUP:
+				case PIN_CONFIG_IN_PULLUP:
+					in_mask |= BIT(j);
+				}
+			}
+
+			result |= ((unsigned long)(in_level & in_mask) |
+				   (out_level & out_mask)) << (i * 8);
+		}
+	}
+
+	return result & mask;
+}
+
 static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct max7301 *ts = container_of(chip, struct max7301, chip);
@@ -160,6 +198,27 @@ static void max7301_set(struct gpio_chip
 	mutex_unlock(&ts->lock);
 }
 
+static void max7301_set_block(struct gpio_chip *chip, unsigned long mask,
+			      unsigned long values)
+{
+	struct max7301 *ts = container_of(chip, struct max7301, chip);
+	unsigned long changes;
+	int i;
+
+	mutex_lock(&ts->lock);
+
+	changes = (ts->out_level ^ (values << 4)) & (mask << 4);
+	ts->out_level ^= changes;
+
+	for (i = 0; i < 4; i++) {
+		if ((changes >> (i * 8 + 4)) & 0xFF) /* i/o only on change */
+			ts->write(ts->dev, 0x44 + i * 8,
+				  (ts->out_level >> (i * 8 + 4)) & 0xFF);
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
 int __devinit __max730x_probe(struct max7301 *ts)
 {
 	struct device *dev = ts->dev;
@@ -183,8 +242,10 @@ int __devinit __max730x_probe(struct max
 
 	ts->chip.direction_input = max7301_direction_input;
 	ts->chip.get = max7301_get;
+	ts->chip.get_block = max7301_get_block;
 	ts->chip.direction_output = max7301_direction_output;
 	ts->chip.set = max7301_set;
+	ts->chip.set_block = max7301_set_block;
 
 	ts->chip.base = pdata->base;
 	ts->chip.ngpio = PIN_NUMBER;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ