[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <Pine.LNX.4.44L0.1210171348380.1743-100000@iolanthe.rowland.org>
Date: Wed, 17 Oct 2012 14:05:24 -0400 (EDT)
From: Alan Stern <stern@...land.harvard.edu>
To: Martin Vysny <vysny@...a.sk>
cc: Kernel development list <linux-kernel@...r.kernel.org>,
USB list <linux-usb@...r.kernel.org>,
<1062114@...s.launchpad.net>
Subject: Re: usb issue on Intel chipset: abrupt mouse movements, usb keyboard
loosing key events
On Wed, 17 Oct 2012, Martin Vysny wrote:
> Good day,
> thank you for your mail. I was finally able to reproduce the issue. I
> am attaching a dmesg output of a correct boot (please note that there
> still are several unwanted IRQs), and a dmesg output of a reproduced error.
Did you boot with the "irqpoll" option? Judging by the log, it looks
like you did.
> [ 67.512014] ehci_hcd 0000:00:1d.0: >Unwanted IRQ: c000 0
> [ 67.512021] ehci_hcd 0000:00:1d.0: >Unwanted IRQ: e000 0
> [ 67.512023] irq 17: nobody cared (try booting with the "irqpoll" option)
> [ 67.512026] Pid: 0, comm: swapper/0 Tainted: G O 3.5.0-17-generic #28
> [ 67.512027] Call Trace:
> [ 67.512034] [<c10c6ae9>] __report_bad_irq+0x29/0xd0
> [ 67.512037] [<c10c6db5>] note_interrupt+0x175/0x1c0
> [ 67.512041] [<c1326d63>] ? intel_idle+0xc3/0x120
> [ 67.512045] [<c10c4bdf>] handle_irq_event_percpu+0x9f/0x1d0
> [ 67.512047] [<c10c4d4b>] handle_irq_event+0x3b/0x60
> [ 67.512050] [<c10c7710>] ? unmask_irq+0x30/0x30
> [ 67.512052] [<c10c775e>] handle_fasteoi_irq+0x4e/0xd0
> [ 67.512053] <IRQ> [<c15d0692>] ? do_IRQ+0x42/0xc0
> [ 67.512062] [<c10689fe>] ? enqueue_hrtimer+0x1e/0x70
> [ 67.512064] [<c15d04f0>] ? common_interrupt+0x30/0x38
> [ 67.512069] [<c10400e0>] ? in_gate_area+0x10/0x50
> [ 67.512071] [<c1326d63>] ? intel_idle+0xc3/0x120
> [ 67.512076] [<c149b7b5>] ? cpuidle_enter+0x15/0x20
> [ 67.512078] [<c149bd18>] ? cpuidle_idle_call+0x88/0x220
> [ 67.512081] [<c101870a>] ? cpu_idle+0xaa/0xe0
> [ 67.512086] [<c159f715>] ? rest_init+0x5d/0x68
> [ 67.512090] [<c18b49be>] ? start_kernel+0x35d/0x363
> [ 67.512092] [<c18b44ed>] ? do_early_param+0x80/0x80
> [ 67.512094] [<c18b4303>] ? i386_start_kernel+0xa6/0xad
> [ 67.512095] handlers:
> [ 67.512098] [<c142fe00>] usb_hcd_irq
> [ 67.512099] Disabling IRQ #17
> [ 69.507175] ehci_hcd 0000:00:1d.0: >Unwanted IRQ: c000 0
> [ 69.607118] ehci_hcd 0000:00:1d.0: >Unwanted IRQ: c000 0
The debugging output show that the EHCI controller was not the source
of the unwanted IRQs. And /proc/interrupts shows that ehci-hcd is the
only driver using IRQ #17, for the 0000:00:1d.0 device.
The most likely explanation is that there an interrupt-routing error
and some other device is causing these problems. I don't know of any
easy way to find out what the other device is, however.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists