[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1350566815-409-16-git-send-email-mporter@ti.com>
Date: Thu, 18 Oct 2012 09:26:54 -0400
From: Matt Porter <mporter@...com>
To: Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Benoit Cousson <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
Cc: Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
Rob Herring <rob.herring@...xeda.com>
Subject: [RFC PATCH v3 15/16] spi: omap2-mcspi: add generic DMA request support to the DT binding
The binding definition is based on the generic DMA request binding.
Signed-off-by: Matt Porter <mporter@...com>
---
Documentation/devicetree/bindings/spi/omap-spi.txt | 27 +++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
index 81df374..11aff04 100644
--- a/Documentation/devicetree/bindings/spi/omap-spi.txt
+++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
@@ -7,8 +7,18 @@ Required properties:
- ti,spi-num-cs : Number of chipselect supported by the instance.
- ti,hwmods: Name of the hwmod associated to the McSPI
+Optional properties:
+- dmas: List of DMA controller phandle and DMA request ordered
+ pairs. One tx and one rx pair is required for each chip
+ select.
+- dma-names: List of DMA request names. These strings correspond
+ 1:1 with the ordered pairs in dmas. The string naming is
+ to be "rxN" and "txN" for RX and TX requests,
+ respectively, where N equals the chip select number.
-Example:
+Examples:
+
+[hwmod populated DMA resources]
mcspi1: mcspi@1 {
#address-cells = <1>;
@@ -18,3 +28,18 @@ mcspi1: mcspi@1 {
ti,spi-num-cs = <4>;
};
+[generic DMA request binding]
+
+mcspi1: mcspi@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <2>;
+ dmas = <&edma 42
+ &edma 43
+ &edma 44
+ &edma 45>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists