linux-kernel - [RFC PATCH v3 14/16] spi: omap2-mcspi: convert to dma_request_slave_channel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1350566815-409-15-git-send-email-mporter@ti.com>
Date:	Thu, 18 Oct 2012 09:26:53 -0400
From:	Matt Porter <mporter@...com>
To:	Tony Lindgren <tony@...mide.com>, Sekhar Nori <nsekhar@...com>,
	Grant Likely <grant.likely@...retlab.ca>,
	Mark Brown <broonie@...nsource.wolfsonmicro.com>,
	Benoit Cousson <b-cousson@...com>,
	Russell King <linux@....linux.org.uk>,
	Vinod Koul <vinod.koul@...el.com>,
	Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
Cc:	Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
	Linux OMAP List <linux-omap@...r.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
	Linux DaVinci Kernel List 
	<davinci-linux-open-source@...ux.davincidsp.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
	Linux Documentation List <linux-doc@...r.kernel.org>,
	Linux MMC List <linux-mmc@...r.kernel.org>,
	Linux SPI Devel List 
	<spi-devel-general@...ts.sourceforge.net>,
	Arnd Bergmann <arnd@...db.de>, Dan Williams <djbw@...com>,
	Rob Herring <rob.herring@...xeda.com>
Subject: [RFC PATCH v3 14/16] spi: omap2-mcspi: convert to dma_request_slave_channel_compat()

Convert dmaengine channel requests to use
dma_request_slave_channel_compat(). This supports the DT case of
platforms requiring channel selection from either the OMAP DMA or
the EDMA engine. AM33xx only boots from DT and is the only user
implementing EDMA so in the !DT case we can default to the OMAP DMA
filter.

Signed-off-by: Matt Porter <mporter@...com>
---
 drivers/spi/spi-omap2-mcspi.c |   65 ++++++++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 3542fdc..793ae8c 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -103,6 +103,9 @@ struct omap2_mcspi_dma {
 
 	struct completion dma_tx_completion;
 	struct completion dma_rx_completion;
+
+	char dma_rx_ch_name[14];
+	char dma_tx_ch_name[14];
 };
 
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
@@ -819,14 +822,23 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 	sig = mcspi_dma->dma_rx_sync_dev;
-	mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+	mcspi_dma->dma_rx =
+		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+						 &sig, &master->dev,
+						 mcspi_dma->dma_rx_ch_name);
+
 	if (!mcspi_dma->dma_rx) {
 		dev_err(&spi->dev, "no RX DMA engine channel for McSPI\n");
 		return -EAGAIN;
 	}
 
 	sig = mcspi_dma->dma_tx_sync_dev;
-	mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+	mcspi_dma->dma_tx =
+		dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+						 &sig, &master->dev,
+						 mcspi_dma->dma_tx_ch_name);
+
 	if (!mcspi_dma->dma_tx) {
 		dev_err(&spi->dev, "no TX DMA engine channel for McSPI\n");
 		dma_release_channel(mcspi_dma->dma_rx);
@@ -1217,29 +1229,42 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 		goto free_master;
 
 	for (i = 0; i < master->num_chipselect; i++) {
-		char dma_ch_name[14];
+		char *dma_rx_ch_name = mcspi->dma_channels[i].dma_rx_ch_name;
+		char *dma_tx_ch_name = mcspi->dma_channels[i].dma_tx_ch_name;
 		struct resource *dma_res;
 
-		sprintf(dma_ch_name, "rx%d", i);
-		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
-		if (!dma_res) {
-			dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
-			status = -ENODEV;
-			break;
-		}
+		sprintf(dma_rx_ch_name, "rx%d", i);
+		if (!pdev->dev.of_node) {
+			dma_res =
+				platform_get_resource_byname(pdev,
+							     IORESOURCE_DMA,
+							     dma_rx_ch_name);
+			if (!dma_res) {
+				dev_dbg(&pdev->dev,
+					"cannot get DMA RX channel\n");
+				status = -ENODEV;
+				break;
+			}
 
-		mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
-		sprintf(dma_ch_name, "tx%d", i);
-		dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-							dma_ch_name);
-		if (!dma_res) {
-			dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
-			status = -ENODEV;
-			break;
+			mcspi->dma_channels[i].dma_rx_sync_dev =
+				dma_res->start;
 		}
+		sprintf(dma_tx_ch_name, "tx%d", i);
+		if (!pdev->dev.of_node) {
+			dma_res =
+				platform_get_resource_byname(pdev,
+							     IORESOURCE_DMA,
+							     dma_tx_ch_name);
+			if (!dma_res) {
+				dev_dbg(&pdev->dev,
+					"cannot get DMA TX channel\n");
+				status = -ENODEV;
+				break;
+			}
 
-		mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start;
+			mcspi->dma_channels[i].dma_tx_sync_dev =
+				dma_res->start;
+		}
 	}
 
 	if (status < 0)
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/