[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1350580760-3886-2-git-send-email-antiroot@gmail.com>
Date: Fri, 19 Oct 2012 02:19:18 +0900
From: Sangho Yi <antiroot@...il.com>
To: prakity@...vell.com, aaron.lu@....com, linus.walleij@...aro.org,
ulf.hansson@...ricsson.com, cjb@...top.org
Cc: linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
Sangho Yi <antiroot@...il.com>
Subject: [PATCH 2/4] mmc: core: sd.c: Made alignment for the multiline function calls
I made the alignment based on the strict coding style as follows;
CHECK: Alignment should match open parenthesis
Signed-off-by: Sangho Yi <antiroot@...il.com>
---
drivers/mmc/core/sd.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 91a73d7..7c6b38e 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -165,7 +165,7 @@ static int mmc_decode_csd(struct mmc_card *card)
break;
default:
pr_err("%s: unrecognised CSD structure version %d\n",
- mmc_hostname(card->host), csd_struct);
+ mmc_hostname(card->host), csd_struct);
return -EINVAL;
}
@@ -189,7 +189,7 @@ static int mmc_decode_scr(struct mmc_card *card)
scr_struct = UNSTUFF_BITS(resp, 60, 4);
if (scr_struct != 0) {
pr_err("%s: unrecognised SCR structure version %d\n",
- mmc_hostname(card->host), scr_struct);
+ mmc_hostname(card->host), scr_struct);
return -EINVAL;
}
@@ -305,7 +305,7 @@ static int mmc_read_switch(struct mmc_card *card)
goto out;
pr_warning("%s: problem reading Bus Speed modes.\n",
- mmc_hostname(card->host));
+ mmc_hostname(card->host));
err = 0;
goto out;
@@ -429,7 +429,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
if ((status[15] & 0xF) != drive_strength) {
pr_warning("%s: Problem setting drive strength!\n",
- mmc_hostname(card->host));
+ mmc_hostname(card->host));
return 0;
}
@@ -508,7 +508,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
if ((status[16] & 0xF) != card->sd_bus_speed)
pr_warning("%s: Problem setting bus speed mode!\n",
- mmc_hostname(card->host));
+ mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
@@ -588,7 +588,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
if (((status[15] >> 4) & 0x0F) != current_limit)
pr_warning("%s: Problem setting current limit!\n",
- mmc_hostname(card->host));
+ mmc_hostname(card->host));
}
@@ -662,9 +662,9 @@ out:
}
MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
- card->raw_cid[2], card->raw_cid[3]);
+ card->raw_cid[2], card->raw_cid[3]);
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
- card->raw_csd[2], card->raw_csd[3]);
+ card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
@@ -758,7 +758,7 @@ try_again:
* Switch procedure. SPI mode doesn't support CMD11.
*/
if (!mmc_host_is_spi(host) && rocr &&
- ((*rocr & 0x41000000) == 0x41000000)) {
+ ((*rocr & 0x41000000) == 0x41000000)) {
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true);
if (err) {
ocr &= ~SD_OCR_S18R;
@@ -989,7 +989,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
* Switch to wider bus (if supported).
*/
if ((host->caps & MMC_CAP_4_BIT_DATA) &&
- (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
if (err)
goto free_card;
@@ -1227,7 +1227,7 @@ err:
mmc_detach_bus(host);
pr_err("%s: error %d whilst initialising SD card\n",
- mmc_hostname(host), err);
+ mmc_hostname(host), err);
return err;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists