[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20121019103205.GG11191@arwen.pp.htv.fi>
Date: Fri, 19 Oct 2012 13:32:05 +0300
From: Felipe Balbi <balbi@...com>
To: Venu Byravarasu <vbyravarasu@...dia.com>
CC: <stern@...land.harvard.edu>, <gregkh@...uxfoundation.org>,
<balbi@...com>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 resend] USB: PHY: Re-organize Tegra USB PHY driver
Hi,
On Fri, Oct 19, 2012 at 04:03:26PM +0530, Venu Byravarasu wrote:
> NVIDIA produces several Tegra SoCs viz Tegra20, Tegra30 etc.
> In order to support USB PHY drivers on these SoCs, existing
> PHY driver is split into SoC agnostic common USB PHY driver
> and Tegra20-specific USB phy driver. This will facilitate
> easy addition and deletion of phy drivers for Tegra SoCs.
>
> Signed-off-by: Venu Byravarasu <vbyravarasu@...xxxxxxx>
you mail ID is wrong here...
> ---
> delta from v3:
>
> Rebased the v3 changes on top of xceiv branch.
>
> delta from v2:
>
> Added an if condition to check for device_node to be not NULL,
> before dereferencing it.
> ---
> drivers/usb/host/ehci-tegra.c | 20 +-
> drivers/usb/phy/Makefile | 1 +
> .../usb/phy/{tegra_usb_phy.c => tegra2_usb_phy.c} | 372 ++---------
> drivers/usb/phy/tegra2_usb_phy.h | 178 +++++
> drivers/usb/phy/tegra_usb_phy.c | 725 +-------------------
> include/linux/usb/tegra_usb_phy.h | 34 +-
> 6 files changed, 304 insertions(+), 1026 deletions(-)
> copy drivers/usb/phy/{tegra_usb_phy.c => tegra2_usb_phy.c} (57%)
> create mode 100644 drivers/usb/phy/tegra2_usb_phy.h
>
> diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
> index 6223d17..e08aea3 100644
> --- a/drivers/usb/host/ehci-tegra.c
> +++ b/drivers/usb/host/ehci-tegra.c
> @@ -618,6 +618,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
> int err = 0;
> int irq;
> int instance = pdev->id;
> + struct device_node *np = pdev->dev.of_node;
> + struct phy_params params;
> + int phy_type;
>
> pdata = pdev->dev.platform_data;
> if (!pdata) {
> @@ -706,9 +709,22 @@ static int tegra_ehci_probe(struct platform_device *pdev)
> }
> }
>
> + phy_type = of_property_match_string(np, "phy_type", "utmi");
> + if (phy_type >= 0)
> + params.type = TEGRA_USB_PHY_TYPE_UTMI;
> + else {
> + phy_type = of_property_match_string(np, "phy_type", "ulpi");
> + if (phy_type >= 0)
> + params.type = TEGRA_USB_PHY_TYPE_ULPI;
> + else
> + params.type = TEGRA_USB_PHY_TYPE_INVALID;
> + }
> +
> + params.mode = TEGRA_USB_PHY_MODE_HOST;
> + params.config = pdata->phy_config;
> +
> tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs,
> - pdata->phy_config,
> - TEGRA_USB_PHY_MODE_HOST);
> + ¶ms);
> if (IS_ERR(tegra->phy)) {
> dev_err(&pdev->dev, "Failed to open USB phy\n");
> err = -ENXIO;
Alan, if you're ok with the ehci-tegra changes, I can carry this patch
by myself.
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index b069f29..21872e1 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
> obj-$(CONFIG_USB_ISP1301) += isp1301.o
> obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
> obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
> +obj-$(CONFIG_USB_EHCI_TEGRA) += tegra2_usb_phy.o
> diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra2_usb_phy.c
> similarity index 57%
> copy from drivers/usb/phy/tegra_usb_phy.c
> copy to drivers/usb/phy/tegra2_usb_phy.c
> index 9d13c81..2ff6dcb 100644
> --- a/drivers/usb/phy/tegra_usb_phy.c
> +++ b/drivers/usb/phy/tegra2_usb_phy.c
> @@ -1,9 +1,11 @@
> /*
> * Copyright (C) 2010 Google, Inc.
> + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> *
> * Author:
> * Erik Gilling <konkers@...gle.com>
> * Benoit Goby <benoit@...roid.com>
> + * Venu Byravarasu <vbyravarasu@...dia.com>
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -29,191 +31,20 @@
> #include <linux/usb/ulpi.h>
> #include <asm/mach-types.h>
> #include <linux/usb/tegra_usb_phy.h>
> +#include <mach/iomap.h>
>
> -#define TEGRA_USB_BASE 0xC5000000
> -#define TEGRA_USB_SIZE SZ_16K
> -
> -#define ULPI_VIEWPORT 0x170
> -
> -#define USB_PORTSC1 0x184
> -#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
> -#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26)
> -#define USB_PORTSC1_PHCD (1 << 23)
> -#define USB_PORTSC1_WKOC (1 << 22)
> -#define USB_PORTSC1_WKDS (1 << 21)
> -#define USB_PORTSC1_WKCN (1 << 20)
> -#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
> -#define USB_PORTSC1_PP (1 << 12)
> -#define USB_PORTSC1_SUSP (1 << 7)
> -#define USB_PORTSC1_PE (1 << 2)
> -#define USB_PORTSC1_CCS (1 << 0)
> -
> -#define USB_SUSP_CTRL 0x400
> -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
> -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
> -#define USB_SUSP_CLR (1 << 5)
> -#define USB_PHY_CLK_VALID (1 << 7)
> -#define UTMIP_RESET (1 << 11)
> -#define UHSIC_RESET (1 << 11)
> -#define UTMIP_PHY_ENABLE (1 << 12)
> -#define ULPI_PHY_ENABLE (1 << 13)
> -#define USB_SUSP_SET (1 << 14)
> -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
> -
> -#define USB1_LEGACY_CTRL 0x410
> -#define USB1_NO_LEGACY_MODE (1 << 0)
> -#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
> -#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
> -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
> - (1 << 1)
> -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
> -#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
> -
> -#define ULPI_TIMING_CTRL_0 0x424
> -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
> -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
> -
> -#define ULPI_TIMING_CTRL_1 0x428
> -#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
> -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
> -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
> -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
> -#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
> -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
> -
> -#define UTMIP_PLL_CFG1 0x804
> -#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
> -#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
> -
> -#define UTMIP_XCVR_CFG0 0x808
> -#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
> -#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
> -#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
> -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
> -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
> -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
> -#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25)
> -
> -#define UTMIP_BIAS_CFG0 0x80c
> -#define UTMIP_OTGPD (1 << 11)
> -#define UTMIP_BIASPD (1 << 10)
> -
> -#define UTMIP_HSRX_CFG0 0x810
> -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
> -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
> -
> -#define UTMIP_HSRX_CFG1 0x814
> -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
> -
> -#define UTMIP_TX_CFG0 0x820
> -#define UTMIP_FS_PREABMLE_J (1 << 19)
> -#define UTMIP_HS_DISCON_DISABLE (1 << 8)
> -
> -#define UTMIP_MISC_CFG0 0x824
> -#define UTMIP_DPDM_OBSERVE (1 << 26)
> -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
> -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
> -
> -#define UTMIP_MISC_CFG1 0x828
> -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
> -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
> -
> -#define UTMIP_DEBOUNCE_CFG0 0x82c
> -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
> -
> -#define UTMIP_BAT_CHRG_CFG0 0x830
> -#define UTMIP_PD_CHRG (1 << 0)
> -
> -#define UTMIP_SPARE_CFG0 0x834
> -#define FUSE_SETUP_SEL (1 << 3)
> -
> -#define UTMIP_XCVR_CFG1 0x838
> -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
> -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
> -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
> -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
> -
> -#define UTMIP_BIAS_CFG1 0x83c
> -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
> +#include "tegra2_usb_phy.h"
>
> static DEFINE_SPINLOCK(utmip_pad_lock);
> static int utmip_pad_count;
>
> -struct tegra_xtal_freq {
> - int freq;
> - u8 enable_delay;
> - u8 stable_count;
> - u8 active_delay;
> - u8 xtal_freq_count;
> - u16 debounce;
> -};
> -
> -static const struct tegra_xtal_freq tegra_freq_table[] = {
> - {
> - .freq = 12000000,
> - .enable_delay = 0x02,
> - .stable_count = 0x2F,
> - .active_delay = 0x04,
> - .xtal_freq_count = 0x76,
> - .debounce = 0x7530,
> - },
> - {
> - .freq = 13000000,
> - .enable_delay = 0x02,
> - .stable_count = 0x33,
> - .active_delay = 0x05,
> - .xtal_freq_count = 0x7F,
> - .debounce = 0x7EF4,
> - },
> - {
> - .freq = 19200000,
> - .enable_delay = 0x03,
> - .stable_count = 0x4B,
> - .active_delay = 0x06,
> - .xtal_freq_count = 0xBB,
> - .debounce = 0xBB80,
> - },
> - {
> - .freq = 26000000,
> - .enable_delay = 0x04,
> - .stable_count = 0x66,
> - .active_delay = 0x09,
> - .xtal_freq_count = 0xFE,
> - .debounce = 0xFDE8,
> - },
> -};
> -
> -static struct tegra_utmip_config utmip_default[] = {
> - [0] = {
> - .hssync_start_delay = 9,
> - .idle_wait_delay = 17,
> - .elastic_limit = 16,
> - .term_range_adj = 6,
> - .xcvr_setup = 9,
> - .xcvr_lsfslew = 1,
> - .xcvr_lsrslew = 1,
> - },
> - [2] = {
> - .hssync_start_delay = 9,
> - .idle_wait_delay = 17,
> - .elastic_limit = 16,
> - .term_range_adj = 6,
> - .xcvr_setup = 9,
> - .xcvr_lsfslew = 2,
> - .xcvr_lsrslew = 2,
> - },
> -};
> -
> static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
> {
> - return (phy->instance == 1);
> + return (phy->type == TEGRA_USB_PHY_TYPE_ULPI);
> }
>
> -static int utmip_pad_open(struct tegra_usb_phy *phy)
> +
> +static int tegra2_utmip_pad_open(struct tegra_usb_phy *phy)
> {
> phy->pad_clk = clk_get_sys("utmip-pad", NULL);
> if (IS_ERR(phy->pad_clk)) {
> @@ -234,14 +65,14 @@ static int utmip_pad_open(struct tegra_usb_phy *phy)
> return 0;
> }
>
> -static void utmip_pad_close(struct tegra_usb_phy *phy)
> +static void tegra2_utmip_pad_close(struct tegra_usb_phy *phy)
> {
> if (phy->instance != 0)
> iounmap(phy->pad_regs);
> clk_put(phy->pad_clk);
> }
>
> -static void utmip_pad_power_on(struct tegra_usb_phy *phy)
> +static void tegra2_utmip_pad_power_on(struct tegra_usb_phy *phy)
> {
> unsigned long val, flags;
> void __iomem *base = phy->pad_regs;
> @@ -261,7 +92,7 @@ static void utmip_pad_power_on(struct tegra_usb_phy *phy)
> clk_disable_unprepare(phy->pad_clk);
> }
>
> -static int utmip_pad_power_off(struct tegra_usb_phy *phy)
> +static int tegra2_utmip_pad_power_off(struct tegra_usb_phy *phy)
> {
> unsigned long val, flags;
> void __iomem *base = phy->pad_regs;
> @@ -291,6 +122,7 @@ static int utmip_pad_power_off(struct tegra_usb_phy *phy)
> static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
> {
> unsigned long timeout = 2000;
> +
> do {
> if ((readl(reg) & mask) == result)
> return 0;
> @@ -300,7 +132,7 @@ static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
> return -1;
> }
>
> -static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
> +static void tegra2_utmi_phy_clk_disable(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -327,7 +159,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
> pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
> }
>
> -static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
> +static void tegra2_utmi_phy_clk_enable(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -355,7 +187,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
> pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
> }
>
> -static int utmi_phy_power_on(struct tegra_usb_phy *phy)
> +static int tegra2_utmi_phy_power_on(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -413,7 +245,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
> writel(val, base + USB_SUSP_CTRL);
> }
>
> - utmip_pad_power_on(phy);
> + tegra2_utmip_pad_power_on(phy);
>
> val = readl(base + UTMIP_XCVR_CFG0);
> val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
> @@ -470,7 +302,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
> writel(val, base + USB_SUSP_CTRL);
> }
>
> - utmi_phy_clk_enable(phy);
> + tegra2_utmi_phy_clk_enable(phy);
>
> if (phy->instance == 2) {
> val = readl(base + USB_PORTSC1);
> @@ -481,12 +313,12 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
> return 0;
> }
>
> -static int utmi_phy_power_off(struct tegra_usb_phy *phy)
> +static int tegra2_utmi_phy_power_off(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
>
> - utmi_phy_clk_disable(phy);
> + tegra2_utmi_phy_clk_disable(phy);
>
> if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
> val = readl(base + USB_SUSP_CTRL);
> @@ -513,10 +345,10 @@ static int utmi_phy_power_off(struct tegra_usb_phy *phy)
> UTMIP_FORCE_PDDR_POWERDOWN;
> writel(val, base + UTMIP_XCVR_CFG1);
>
> - return utmip_pad_power_off(phy);
> + return tegra2_utmip_pad_power_off(phy);
> }
>
> -static void utmi_phy_preresume(struct tegra_usb_phy *phy)
> +static void tegra2_utmi_phy_preresume(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -526,7 +358,7 @@ static void utmi_phy_preresume(struct tegra_usb_phy *phy)
> writel(val, base + UTMIP_TX_CFG0);
> }
>
> -static void utmi_phy_postresume(struct tegra_usb_phy *phy)
> +static void tegra2_utmi_phy_postresume(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -536,7 +368,7 @@ static void utmi_phy_postresume(struct tegra_usb_phy *phy)
> writel(val, base + UTMIP_TX_CFG0);
> }
>
> -static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
> +static void tegra2_utmi_phy_restore_start(struct tegra_usb_phy *phy,
> enum tegra_usb_phy_port_speed port_speed)
> {
> unsigned long val;
> @@ -557,7 +389,7 @@ static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
> udelay(10);
> }
>
> -static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
> +static void tegra2_utmi_phy_restore_end(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -568,7 +400,7 @@ static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
> udelay(10);
> }
>
> -static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
> +static int tegra2_ulpi_phy_power_on(struct tegra_usb_phy *phy)
> {
> int ret;
> unsigned long val;
> @@ -637,7 +469,7 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
> return 0;
> }
>
> -static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
> +static int tegra2_ulpi_phy_power_off(struct tegra_usb_phy *phy)
> {
> unsigned long val;
> void __iomem *base = phy->regs;
> @@ -654,9 +486,8 @@ static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
> return gpio_direction_output(config->reset_gpio, 0);
> }
>
> -static int tegra_phy_init(struct usb_phy *x)
> +static int tegra2_usb_phy_open(struct tegra_usb_phy *phy)
> {
> - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
> struct tegra_ulpi_config *ulpi_config;
> int err;
>
> @@ -683,7 +514,7 @@ static int tegra_phy_init(struct usb_phy *x)
> phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
> phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
> } else {
> - err = utmip_pad_open(phy);
> + err = tegra2_utmip_pad_open(phy);
> if (err < 0)
> goto err1;
> }
> @@ -694,147 +525,36 @@ err1:
> return err;
> }
>
> -static void tegra_usb_phy_close(struct usb_phy *x)
> +static void tegra2_usb_phy_close(struct tegra_usb_phy *phy)
> {
> - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
> -
> if (phy_is_ulpi(phy))
> clk_put(phy->clk);
> else
> - utmip_pad_close(phy);
> + tegra2_utmip_pad_close(phy);
> clk_disable_unprepare(phy->pll_u);
> clk_put(phy->pll_u);
> - kfree(phy);
> }
>
> -static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
> +int tegra2_usb_phy_init(struct tegra_usb_phy *phy)
> {
> - if (phy_is_ulpi(phy))
> - return ulpi_phy_power_on(phy);
> - else
> - return utmi_phy_power_on(phy);
> -}
> + if ((phy->type != TEGRA_USB_PHY_TYPE_ULPI) &&
> + (phy->type != TEGRA_USB_PHY_TYPE_UTMI))
> + return -EINVAL;
>
> -static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
> -{
> - if (phy_is_ulpi(phy))
> - return ulpi_phy_power_off(phy);
> - else
> - return utmi_phy_power_off(phy);
> -}
> + phy->ops.open = tegra2_usb_phy_open;
> + phy->ops.close = tegra2_usb_phy_close;
>
> -static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
> -{
> - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
> - if (suspend)
> - return tegra_usb_phy_power_off(phy);
> - else
> - return tegra_usb_phy_power_on(phy);
> -}
> -
> -struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
> - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
> -{
> - struct tegra_usb_phy *phy;
> - unsigned long parent_rate;
> - int i;
> - int err;
> -
> - phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
> - if (!phy)
> - return ERR_PTR(-ENOMEM);
> -
> - phy->instance = instance;
> - phy->regs = regs;
> - phy->config = config;
> - phy->mode = phy_mode;
> - phy->dev = dev;
> -
> - if (!phy->config) {
> - if (phy_is_ulpi(phy)) {
> - pr_err("%s: ulpi phy configuration missing", __func__);
> - err = -EINVAL;
> - goto err0;
> - } else {
> - phy->config = &utmip_default[instance];
> - }
> - }
> -
> - phy->pll_u = clk_get_sys(NULL, "pll_u");
> - if (IS_ERR(phy->pll_u)) {
> - pr_err("Can't get pll_u clock\n");
> - err = PTR_ERR(phy->pll_u);
> - goto err0;
> - }
> - clk_prepare_enable(phy->pll_u);
> -
> - parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
> - for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
> - if (tegra_freq_table[i].freq == parent_rate) {
> - phy->freq = &tegra_freq_table[i];
> - break;
> - }
> - }
> - if (!phy->freq) {
> - pr_err("invalid pll_u parent rate %ld\n", parent_rate);
> - err = -EINVAL;
> - goto err1;
> + if (phy_is_ulpi(phy)) {
> + phy->ops.power_on = tegra2_ulpi_phy_power_on;
> + phy->ops.power_off = tegra2_ulpi_phy_power_off;
> + } else if (phy->type == TEGRA_USB_PHY_TYPE_UTMI) {
> + phy->ops.postresume = tegra2_utmi_phy_postresume;
> + phy->ops.power_off = tegra2_utmi_phy_power_off;
> + phy->ops.power_on = tegra2_utmi_phy_power_on;
> + phy->ops.preresume = tegra2_utmi_phy_preresume;
> + phy->ops.restore_end = tegra2_utmi_phy_restore_end;
> + phy->ops.restore_start = tegra2_utmi_phy_restore_start;
> }
>
> - phy->u_phy.init = tegra_phy_init;
> - phy->u_phy.shutdown = tegra_usb_phy_close;
> - phy->u_phy.set_suspend = tegra_usb_phy_suspend;
> -
> - return phy;
> -
> -err1:
> - clk_disable_unprepare(phy->pll_u);
> - clk_put(phy->pll_u);
> -err0:
> - kfree(phy);
> - return ERR_PTR(err);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
> -
> -void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_preresume(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
> -
> -void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_postresume(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
> -
> -void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
> - enum tegra_usb_phy_port_speed port_speed)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_restore_start(phy, port_speed);
> -}
> -EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
> -
> -void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_restore_end(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
> -
> -void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_clk_disable(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
> -
> -void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_clk_enable(phy);
> + return 0;
> }
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
> diff --git a/drivers/usb/phy/tegra2_usb_phy.h b/drivers/usb/phy/tegra2_usb_phy.h
> new file mode 100644
> index 0000000..32b0c03
> --- /dev/null
> +++ b/drivers/usb/phy/tegra2_usb_phy.h
> @@ -0,0 +1,178 @@
> +/*
> + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
> + *
> + * Author: Venu Byravarasu <vbyravarasu@...dia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef _TEGRA2_USB_PHY_H
> +#define _TEGRA2_USB_PHY_H
> +
> +#define TEGRA_USB_BASE 0xC5000000
> +#define TEGRA_USB_SIZE SZ_16K
> +
> +#define ULPI_VIEWPORT 0x170
> +
> +#define USB_PORTSC1 0x184
> +#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
> +#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26)
> +#define USB_PORTSC1_PHCD (1 << 23)
> +#define USB_PORTSC1_WKOC (1 << 22)
> +#define USB_PORTSC1_WKDS (1 << 21)
> +#define USB_PORTSC1_WKCN (1 << 20)
> +#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
> +#define USB_PORTSC1_PP (1 << 12)
> +#define USB_PORTSC1_SUSP (1 << 7)
> +#define USB_PORTSC1_PE (1 << 2)
> +#define USB_PORTSC1_CCS (1 << 0)
> +
> +#define USB_SUSP_CTRL 0x400
> +#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
> +#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
> +#define USB_SUSP_CLR (1 << 5)
> +#define USB_PHY_CLK_VALID (1 << 7)
> +#define UTMIP_RESET (1 << 11)
> +#define UHSIC_RESET (1 << 11)
> +#define UTMIP_PHY_ENABLE (1 << 12)
> +#define ULPI_PHY_ENABLE (1 << 13)
> +#define USB_SUSP_SET (1 << 14)
> +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
> +
> +#define USB1_LEGACY_CTRL 0x410
> +#define USB1_NO_LEGACY_MODE (1 << 0)
> +#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
> +#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
> +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
> + (1 << 1)
> +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
> +#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
> +
> +#define ULPI_TIMING_CTRL_0 0x424
> +#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
> +#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
> +
> +#define ULPI_TIMING_CTRL_1 0x428
> +#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
> +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
> +#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
> +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
> +#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
> +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
> +
> +#define UTMIP_PLL_CFG1 0x804
> +#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
> +#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
> +
> +#define UTMIP_XCVR_CFG0 0x808
> +#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
> +#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
> +#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
> +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
> +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
> +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
> +#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25)
> +
> +#define UTMIP_BIAS_CFG0 0x80c
> +#define UTMIP_OTGPD (1 << 11)
> +#define UTMIP_BIASPD (1 << 10)
> +
> +#define UTMIP_HSRX_CFG0 0x810
> +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
> +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
> +
> +#define UTMIP_HSRX_CFG1 0x814
> +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
> +
> +#define UTMIP_TX_CFG0 0x820
> +#define UTMIP_FS_PREABMLE_J (1 << 19)
> +#define UTMIP_HS_DISCON_DISABLE (1 << 8)
> +
> +#define UTMIP_MISC_CFG0 0x824
> +#define UTMIP_DPDM_OBSERVE (1 << 26)
> +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
> +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
> +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
> +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
> +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
> +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
> +
> +#define UTMIP_MISC_CFG1 0x828
> +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
> +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
> +
> +#define UTMIP_DEBOUNCE_CFG0 0x82c
> +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
> +
> +#define UTMIP_BAT_CHRG_CFG0 0x830
> +#define UTMIP_PD_CHRG (1 << 0)
> +
> +#define UTMIP_SPARE_CFG0 0x834
> +#define FUSE_SETUP_SEL (1 << 3)
> +
> +#define UTMIP_XCVR_CFG1 0x838
> +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
> +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
> +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
> +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
> +
> +#define UTMIP_BIAS_CFG1 0x83c
> +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
> +
> +struct tegra_xtal_freq {
> + int freq;
> + u8 enable_delay;
> + u8 stable_count;
> + u8 active_delay;
> + u8 xtal_freq_count;
> + u16 debounce;
> +};
> +
> +static const struct tegra_xtal_freq tegra_freq_table[] = {
> + {
> + .freq = 12000000,
> + .enable_delay = 0x02,
> + .stable_count = 0x2F,
> + .active_delay = 0x04,
> + .xtal_freq_count = 0x76,
> + .debounce = 0x7530,
> + },
> + {
> + .freq = 13000000,
> + .enable_delay = 0x02,
> + .stable_count = 0x33,
> + .active_delay = 0x05,
> + .xtal_freq_count = 0x7F,
> + .debounce = 0x7EF4,
> + },
> + {
> + .freq = 19200000,
> + .enable_delay = 0x03,
> + .stable_count = 0x4B,
> + .active_delay = 0x06,
> + .xtal_freq_count = 0xBB,
> + .debounce = 0xBB80,
> + },
> + {
> + .freq = 26000000,
> + .enable_delay = 0x04,
> + .stable_count = 0x66,
> + .active_delay = 0x09,
> + .xtal_freq_count = 0xFE,
> + .debounce = 0xFDE8,
> + },
> +};
> +
> +int tegra2_usb_phy_init(struct tegra_usb_phy *phy);
> +
> +#endif /* _TEGRA2_USB_PHY_H */
> diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
> index 9d13c81..60334d8 100644
> --- a/drivers/usb/phy/tegra_usb_phy.c
> +++ b/drivers/usb/phy/tegra_usb_phy.c
> @@ -29,163 +29,7 @@
> #include <linux/usb/ulpi.h>
> #include <asm/mach-types.h>
> #include <linux/usb/tegra_usb_phy.h>
> -
> -#define TEGRA_USB_BASE 0xC5000000
> -#define TEGRA_USB_SIZE SZ_16K
> -
> -#define ULPI_VIEWPORT 0x170
> -
> -#define USB_PORTSC1 0x184
> -#define USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
> -#define USB_PORTSC1_PSPD(x) (((x) & 0x3) << 26)
> -#define USB_PORTSC1_PHCD (1 << 23)
> -#define USB_PORTSC1_WKOC (1 << 22)
> -#define USB_PORTSC1_WKDS (1 << 21)
> -#define USB_PORTSC1_WKCN (1 << 20)
> -#define USB_PORTSC1_PTC(x) (((x) & 0xf) << 16)
> -#define USB_PORTSC1_PP (1 << 12)
> -#define USB_PORTSC1_SUSP (1 << 7)
> -#define USB_PORTSC1_PE (1 << 2)
> -#define USB_PORTSC1_CCS (1 << 0)
> -
> -#define USB_SUSP_CTRL 0x400
> -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
> -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
> -#define USB_SUSP_CLR (1 << 5)
> -#define USB_PHY_CLK_VALID (1 << 7)
> -#define UTMIP_RESET (1 << 11)
> -#define UHSIC_RESET (1 << 11)
> -#define UTMIP_PHY_ENABLE (1 << 12)
> -#define ULPI_PHY_ENABLE (1 << 13)
> -#define USB_SUSP_SET (1 << 14)
> -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
> -
> -#define USB1_LEGACY_CTRL 0x410
> -#define USB1_NO_LEGACY_MODE (1 << 0)
> -#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
> -#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
> -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
> - (1 << 1)
> -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
> -#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
> -
> -#define ULPI_TIMING_CTRL_0 0x424
> -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
> -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
> -
> -#define ULPI_TIMING_CTRL_1 0x428
> -#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
> -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
> -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
> -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
> -#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
> -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
> -
> -#define UTMIP_PLL_CFG1 0x804
> -#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
> -#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
> -
> -#define UTMIP_XCVR_CFG0 0x808
> -#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
> -#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
> -#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
> -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
> -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
> -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
> -#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25)
> -
> -#define UTMIP_BIAS_CFG0 0x80c
> -#define UTMIP_OTGPD (1 << 11)
> -#define UTMIP_BIASPD (1 << 10)
> -
> -#define UTMIP_HSRX_CFG0 0x810
> -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
> -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
> -
> -#define UTMIP_HSRX_CFG1 0x814
> -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
> -
> -#define UTMIP_TX_CFG0 0x820
> -#define UTMIP_FS_PREABMLE_J (1 << 19)
> -#define UTMIP_HS_DISCON_DISABLE (1 << 8)
> -
> -#define UTMIP_MISC_CFG0 0x824
> -#define UTMIP_DPDM_OBSERVE (1 << 26)
> -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
> -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
> -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
> -
> -#define UTMIP_MISC_CFG1 0x828
> -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
> -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
> -
> -#define UTMIP_DEBOUNCE_CFG0 0x82c
> -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
> -
> -#define UTMIP_BAT_CHRG_CFG0 0x830
> -#define UTMIP_PD_CHRG (1 << 0)
> -
> -#define UTMIP_SPARE_CFG0 0x834
> -#define FUSE_SETUP_SEL (1 << 3)
> -
> -#define UTMIP_XCVR_CFG1 0x838
> -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
> -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
> -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
> -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
> -
> -#define UTMIP_BIAS_CFG1 0x83c
> -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
> -
> -static DEFINE_SPINLOCK(utmip_pad_lock);
> -static int utmip_pad_count;
> -
> -struct tegra_xtal_freq {
> - int freq;
> - u8 enable_delay;
> - u8 stable_count;
> - u8 active_delay;
> - u8 xtal_freq_count;
> - u16 debounce;
> -};
> -
> -static const struct tegra_xtal_freq tegra_freq_table[] = {
> - {
> - .freq = 12000000,
> - .enable_delay = 0x02,
> - .stable_count = 0x2F,
> - .active_delay = 0x04,
> - .xtal_freq_count = 0x76,
> - .debounce = 0x7530,
> - },
> - {
> - .freq = 13000000,
> - .enable_delay = 0x02,
> - .stable_count = 0x33,
> - .active_delay = 0x05,
> - .xtal_freq_count = 0x7F,
> - .debounce = 0x7EF4,
> - },
> - {
> - .freq = 19200000,
> - .enable_delay = 0x03,
> - .stable_count = 0x4B,
> - .active_delay = 0x06,
> - .xtal_freq_count = 0xBB,
> - .debounce = 0xBB80,
> - },
> - {
> - .freq = 26000000,
> - .enable_delay = 0x04,
> - .stable_count = 0x66,
> - .active_delay = 0x09,
> - .xtal_freq_count = 0xFE,
> - .debounce = 0xFDE8,
> - },
> -};
> +#include "tegra2_usb_phy.h"
>
> static struct tegra_utmip_config utmip_default[] = {
> [0] = {
> @@ -208,550 +52,54 @@ static struct tegra_utmip_config utmip_default[] = {
> },
> };
>
> -static inline bool phy_is_ulpi(struct tegra_usb_phy *phy)
> -{
> - return (phy->instance == 1);
> -}
> -
> -static int utmip_pad_open(struct tegra_usb_phy *phy)
> -{
> - phy->pad_clk = clk_get_sys("utmip-pad", NULL);
> - if (IS_ERR(phy->pad_clk)) {
> - pr_err("%s: can't get utmip pad clock\n", __func__);
> - return PTR_ERR(phy->pad_clk);
> - }
> -
> - if (phy->instance == 0) {
> - phy->pad_regs = phy->regs;
> - } else {
> - phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE);
> - if (!phy->pad_regs) {
> - pr_err("%s: can't remap usb registers\n", __func__);
> - clk_put(phy->pad_clk);
> - return -ENOMEM;
> - }
> - }
> - return 0;
> -}
> -
> -static void utmip_pad_close(struct tegra_usb_phy *phy)
> -{
> - if (phy->instance != 0)
> - iounmap(phy->pad_regs);
> - clk_put(phy->pad_clk);
> -}
> -
> -static void utmip_pad_power_on(struct tegra_usb_phy *phy)
> -{
> - unsigned long val, flags;
> - void __iomem *base = phy->pad_regs;
> -
> - clk_prepare_enable(phy->pad_clk);
> -
> - spin_lock_irqsave(&utmip_pad_lock, flags);
> -
> - if (utmip_pad_count++ == 0) {
> - val = readl(base + UTMIP_BIAS_CFG0);
> - val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
> - writel(val, base + UTMIP_BIAS_CFG0);
> - }
> -
> - spin_unlock_irqrestore(&utmip_pad_lock, flags);
> -
> - clk_disable_unprepare(phy->pad_clk);
> -}
> -
> -static int utmip_pad_power_off(struct tegra_usb_phy *phy)
> -{
> - unsigned long val, flags;
> - void __iomem *base = phy->pad_regs;
> -
> - if (!utmip_pad_count) {
> - pr_err("%s: utmip pad already powered off\n", __func__);
> - return -EINVAL;
> - }
> -
> - clk_prepare_enable(phy->pad_clk);
> -
> - spin_lock_irqsave(&utmip_pad_lock, flags);
> -
> - if (--utmip_pad_count == 0) {
> - val = readl(base + UTMIP_BIAS_CFG0);
> - val |= UTMIP_OTGPD | UTMIP_BIASPD;
> - writel(val, base + UTMIP_BIAS_CFG0);
> - }
> -
> - spin_unlock_irqrestore(&utmip_pad_lock, flags);
> -
> - clk_disable_unprepare(phy->pad_clk);
> -
> - return 0;
> -}
> -
> -static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
> -{
> - unsigned long timeout = 2000;
> - do {
> - if ((readl(reg) & mask) == result)
> - return 0;
> - udelay(1);
> - timeout--;
> - } while (timeout);
> - return -1;
> -}
> -
> -static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - if (phy->instance == 0) {
> - val = readl(base + USB_SUSP_CTRL);
> - val |= USB_SUSP_SET;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - udelay(10);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~USB_SUSP_SET;
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - if (phy->instance == 2) {
> - val = readl(base + USB_PORTSC1);
> - val |= USB_PORTSC1_PHCD;
> - writel(val, base + USB_PORTSC1);
> - }
> -
> - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
> - pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
> -}
> -
> -static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - if (phy->instance == 0) {
> - val = readl(base + USB_SUSP_CTRL);
> - val |= USB_SUSP_CLR;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - udelay(10);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~USB_SUSP_CLR;
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - if (phy->instance == 2) {
> - val = readl(base + USB_PORTSC1);
> - val &= ~USB_PORTSC1_PHCD;
> - writel(val, base + USB_PORTSC1);
> - }
> -
> - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
> - USB_PHY_CLK_VALID))
> - pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
> -}
> -
> -static int utmi_phy_power_on(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> - struct tegra_utmip_config *config = phy->config;
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val |= UTMIP_RESET;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - if (phy->instance == 0) {
> - val = readl(base + USB1_LEGACY_CTRL);
> - val |= USB1_NO_LEGACY_MODE;
> - writel(val, base + USB1_LEGACY_CTRL);
> - }
> -
> - val = readl(base + UTMIP_TX_CFG0);
> - val &= ~UTMIP_FS_PREABMLE_J;
> - writel(val, base + UTMIP_TX_CFG0);
> -
> - val = readl(base + UTMIP_HSRX_CFG0);
> - val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
> - val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
> - val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
> - writel(val, base + UTMIP_HSRX_CFG0);
> -
> - val = readl(base + UTMIP_HSRX_CFG1);
> - val &= ~UTMIP_HS_SYNC_START_DLY(~0);
> - val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
> - writel(val, base + UTMIP_HSRX_CFG1);
> -
> - val = readl(base + UTMIP_DEBOUNCE_CFG0);
> - val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
> - val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
> - writel(val, base + UTMIP_DEBOUNCE_CFG0);
> -
> - val = readl(base + UTMIP_MISC_CFG0);
> - val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
> - writel(val, base + UTMIP_MISC_CFG0);
> -
> - val = readl(base + UTMIP_MISC_CFG1);
> - val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0));
> - val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
> - UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
> - writel(val, base + UTMIP_MISC_CFG1);
> -
> - val = readl(base + UTMIP_PLL_CFG1);
> - val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
> - val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
> - UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
> - writel(val, base + UTMIP_PLL_CFG1);
> -
> - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - utmip_pad_power_on(phy);
> -
> - val = readl(base + UTMIP_XCVR_CFG0);
> - val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
> - UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
> - UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
> - UTMIP_XCVR_HSSLEW_MSB(~0));
> - val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
> - val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
> - val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
> - writel(val, base + UTMIP_XCVR_CFG0);
> -
> - val = readl(base + UTMIP_XCVR_CFG1);
> - val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
> - UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
> - val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
> - writel(val, base + UTMIP_XCVR_CFG1);
> -
> - val = readl(base + UTMIP_BAT_CHRG_CFG0);
> - val &= ~UTMIP_PD_CHRG;
> - writel(val, base + UTMIP_BAT_CHRG_CFG0);
> -
> - val = readl(base + UTMIP_BIAS_CFG1);
> - val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
> - val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
> - writel(val, base + UTMIP_BIAS_CFG1);
> -
> - if (phy->instance == 0) {
> - val = readl(base + UTMIP_SPARE_CFG0);
> - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE)
> - val &= ~FUSE_SETUP_SEL;
> - else
> - val |= FUSE_SETUP_SEL;
> - writel(val, base + UTMIP_SPARE_CFG0);
> - }
> -
> - if (phy->instance == 2) {
> - val = readl(base + USB_SUSP_CTRL);
> - val |= UTMIP_PHY_ENABLE;
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~UTMIP_RESET;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - if (phy->instance == 0) {
> - val = readl(base + USB1_LEGACY_CTRL);
> - val &= ~USB1_VBUS_SENSE_CTL_MASK;
> - val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
> - writel(val, base + USB1_LEGACY_CTRL);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~USB_SUSP_SET;
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - utmi_phy_clk_enable(phy);
> -
> - if (phy->instance == 2) {
> - val = readl(base + USB_PORTSC1);
> - val &= ~USB_PORTSC1_PTS(~0);
> - writel(val, base + USB_PORTSC1);
> - }
> -
> - return 0;
> -}
> -
> -static int utmi_phy_power_off(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - utmi_phy_clk_disable(phy);
> -
> - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) {
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
> - val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
> - writel(val, base + USB_SUSP_CTRL);
> - }
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val |= UTMIP_RESET;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - val = readl(base + UTMIP_BAT_CHRG_CFG0);
> - val |= UTMIP_PD_CHRG;
> - writel(val, base + UTMIP_BAT_CHRG_CFG0);
> -
> - val = readl(base + UTMIP_XCVR_CFG0);
> - val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
> - UTMIP_FORCE_PDZI_POWERDOWN;
> - writel(val, base + UTMIP_XCVR_CFG0);
> -
> - val = readl(base + UTMIP_XCVR_CFG1);
> - val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
> - UTMIP_FORCE_PDDR_POWERDOWN;
> - writel(val, base + UTMIP_XCVR_CFG1);
> -
> - return utmip_pad_power_off(phy);
> -}
> -
> -static void utmi_phy_preresume(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - val = readl(base + UTMIP_TX_CFG0);
> - val |= UTMIP_HS_DISCON_DISABLE;
> - writel(val, base + UTMIP_TX_CFG0);
> -}
> -
> -static void utmi_phy_postresume(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - val = readl(base + UTMIP_TX_CFG0);
> - val &= ~UTMIP_HS_DISCON_DISABLE;
> - writel(val, base + UTMIP_TX_CFG0);
> -}
> -
> -static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
> - enum tegra_usb_phy_port_speed port_speed)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - val = readl(base + UTMIP_MISC_CFG0);
> - val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
> - if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
> - val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
> - else
> - val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
> - writel(val, base + UTMIP_MISC_CFG0);
> - udelay(1);
> -
> - val = readl(base + UTMIP_MISC_CFG0);
> - val |= UTMIP_DPDM_OBSERVE;
> - writel(val, base + UTMIP_MISC_CFG0);
> - udelay(10);
> -}
> -
> -static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> -
> - val = readl(base + UTMIP_MISC_CFG0);
> - val &= ~UTMIP_DPDM_OBSERVE;
> - writel(val, base + UTMIP_MISC_CFG0);
> - udelay(10);
> -}
> -
> -static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
> -{
> - int ret;
> - unsigned long val;
> - void __iomem *base = phy->regs;
> - struct tegra_ulpi_config *config = phy->config;
> -
> - gpio_direction_output(config->reset_gpio, 0);
> - msleep(5);
> - gpio_direction_output(config->reset_gpio, 1);
> -
> - clk_prepare_enable(phy->clk);
> - msleep(1);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val |= UHSIC_RESET;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - val = readl(base + ULPI_TIMING_CTRL_0);
> - val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
> - writel(val, base + ULPI_TIMING_CTRL_0);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val |= ULPI_PHY_ENABLE;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - val = 0;
> - writel(val, base + ULPI_TIMING_CTRL_1);
> -
> - val |= ULPI_DATA_TRIMMER_SEL(4);
> - val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
> - val |= ULPI_DIR_TRIMMER_SEL(4);
> - writel(val, base + ULPI_TIMING_CTRL_1);
> - udelay(10);
> -
> - val |= ULPI_DATA_TRIMMER_LOAD;
> - val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
> - val |= ULPI_DIR_TRIMMER_LOAD;
> - writel(val, base + ULPI_TIMING_CTRL_1);
> -
> - /* Fix VbusInvalid due to floating VBUS */
> - ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
> - if (ret) {
> - pr_err("%s: ulpi write failed\n", __func__);
> - return ret;
> - }
> -
> - ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
> - if (ret) {
> - pr_err("%s: ulpi write failed\n", __func__);
> - return ret;
> - }
> -
> - val = readl(base + USB_PORTSC1);
> - val |= USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN;
> - writel(val, base + USB_PORTSC1);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val |= USB_SUSP_CLR;
> - writel(val, base + USB_SUSP_CTRL);
> - udelay(100);
> -
> - val = readl(base + USB_SUSP_CTRL);
> - val &= ~USB_SUSP_CLR;
> - writel(val, base + USB_SUSP_CTRL);
> -
> - return 0;
> -}
> -
> -static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
> -{
> - unsigned long val;
> - void __iomem *base = phy->regs;
> - struct tegra_ulpi_config *config = phy->config;
> -
> - /* Clear WKCN/WKDS/WKOC wake-on events that can cause the USB
> - * Controller to immediately bring the ULPI PHY out of low power
> - */
> - val = readl(base + USB_PORTSC1);
> - val &= ~(USB_PORTSC1_WKOC | USB_PORTSC1_WKDS | USB_PORTSC1_WKCN);
> - writel(val, base + USB_PORTSC1);
> -
> - clk_disable(phy->clk);
> - return gpio_direction_output(config->reset_gpio, 0);
> -}
> -
> -static int tegra_phy_init(struct usb_phy *x)
> +static int tegra_phy_init(struct usb_phy *x)
> {
> struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
> - struct tegra_ulpi_config *ulpi_config;
> - int err;
>
> - if (phy_is_ulpi(phy)) {
> - ulpi_config = phy->config;
> - phy->clk = clk_get_sys(NULL, ulpi_config->clk);
> - if (IS_ERR(phy->clk)) {
> - pr_err("%s: can't get ulpi clock\n", __func__);
> - err = -ENXIO;
> - goto err1;
> - }
> - if (!gpio_is_valid(ulpi_config->reset_gpio))
> - ulpi_config->reset_gpio =
> - of_get_named_gpio(phy->dev->of_node,
> - "nvidia,phy-reset-gpio", 0);
> - if (!gpio_is_valid(ulpi_config->reset_gpio)) {
> - pr_err("%s: invalid reset gpio: %d\n", __func__,
> - ulpi_config->reset_gpio);
> - err = -EINVAL;
> - goto err1;
> - }
> - gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
> - gpio_direction_output(ulpi_config->reset_gpio, 0);
> - phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
> - phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
> - } else {
> - err = utmip_pad_open(phy);
> - if (err < 0)
> - goto err1;
> - }
> - return 0;
> -err1:
> - clk_disable_unprepare(phy->pll_u);
> - clk_put(phy->pll_u);
> - return err;
> + return phy->ops.open(phy);
> }
>
> static void tegra_usb_phy_close(struct usb_phy *x)
> {
> struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
>
> - if (phy_is_ulpi(phy))
> - clk_put(phy->clk);
> - else
> - utmip_pad_close(phy);
> - clk_disable_unprepare(phy->pll_u);
> - clk_put(phy->pll_u);
> - kfree(phy);
> -}
> -
> -static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
> -{
> - if (phy_is_ulpi(phy))
> - return ulpi_phy_power_on(phy);
> - else
> - return utmi_phy_power_on(phy);
> -}
> -
> -static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
> -{
> - if (phy_is_ulpi(phy))
> - return ulpi_phy_power_off(phy);
> - else
> - return utmi_phy_power_off(phy);
> + phy->ops.close(phy);
> }
>
> static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
> {
> struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
> - if (suspend)
> - return tegra_usb_phy_power_off(phy);
> - else
> - return tegra_usb_phy_power_on(phy);
> +
> + if (suspend) {
> + if (phy->ops.power_off)
> + return phy->ops.power_off(phy);
> + } else if (phy->ops.power_on)
> + return phy->ops.power_on(phy);
> +
> + return 0;
> }
>
> struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
> - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
> + void __iomem *regs, struct phy_params *params)
> {
> struct tegra_usb_phy *phy;
> unsigned long parent_rate;
> int i;
> int err;
>
> - phy = kmalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL);
> + phy = devm_kzalloc(dev, sizeof(struct tegra_usb_phy), GFP_KERNEL);
> if (!phy)
> return ERR_PTR(-ENOMEM);
>
> phy->instance = instance;
> phy->regs = regs;
> - phy->config = config;
> - phy->mode = phy_mode;
> + phy->config = params->config;
> + phy->mode = params->mode;
> phy->dev = dev;
> + phy->type = params->type;
>
> if (!phy->config) {
> - if (phy_is_ulpi(phy)) {
> + if (params->type == TEGRA_USB_PHY_TYPE_ULPI) {
> pr_err("%s: ulpi phy configuration missing", __func__);
> err = -EINVAL;
> goto err0;
> @@ -781,6 +129,12 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
> goto err1;
> }
>
> + err = tegra2_usb_phy_init(phy);
> + if (err < 0) {
> + pr_err("phy type %d is not supported\n", phy->type);
> + goto err1;
> + }
> +
> phy->u_phy.init = tegra_phy_init;
> phy->u_phy.shutdown = tegra_usb_phy_close;
> phy->u_phy.set_suspend = tegra_usb_phy_suspend;
> @@ -791,50 +145,35 @@ err1:
> clk_disable_unprepare(phy->pll_u);
> clk_put(phy->pll_u);
> err0:
> - kfree(phy);
> return ERR_PTR(err);
> }
> EXPORT_SYMBOL_GPL(tegra_usb_phy_open);
>
> void tegra_usb_phy_preresume(struct tegra_usb_phy *phy)
> {
> - if (!phy_is_ulpi(phy))
> - utmi_phy_preresume(phy);
> + if (phy->ops.preresume)
> + phy->ops.preresume(phy);
> }
> EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
>
> void tegra_usb_phy_postresume(struct tegra_usb_phy *phy)
> {
> - if (!phy_is_ulpi(phy))
> - utmi_phy_postresume(phy);
> + if (phy->ops.postresume)
> + phy->ops.postresume(phy);
> }
> EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
>
> void tegra_ehci_phy_restore_start(struct tegra_usb_phy *phy,
> enum tegra_usb_phy_port_speed port_speed)
> {
> - if (!phy_is_ulpi(phy))
> - utmi_phy_restore_start(phy, port_speed);
> + if (phy->ops.restore_start)
> + phy->ops.restore_start(phy, port_speed);
> }
> EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
>
> void tegra_ehci_phy_restore_end(struct tegra_usb_phy *phy)
> {
> - if (!phy_is_ulpi(phy))
> - utmi_phy_restore_end(phy);
> + if (phy->ops.restore_end)
> + phy->ops.restore_end(phy);
> }
> EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
> -
> -void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_clk_disable(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_disable);
> -
> -void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy)
> -{
> - if (!phy_is_ulpi(phy))
> - utmi_phy_clk_enable(phy);
> -}
> -EXPORT_SYMBOL_GPL(tegra_usb_phy_clk_enable);
> diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
> index 176b1ca..c27705b 100644
> --- a/include/linux/usb/tegra_usb_phy.h
> +++ b/include/linux/usb/tegra_usb_phy.h
> @@ -44,8 +44,34 @@ enum tegra_usb_phy_mode {
> TEGRA_USB_PHY_MODE_HOST,
> };
>
> +enum tegra_usb_phy_type {
> + TEGRA_USB_PHY_TYPE_UTMI = 0,
> + TEGRA_USB_PHY_TYPE_ULPI,
> + TEGRA_USB_PHY_TYPE_INVALID,
> +};
> +
> +struct tegra_usb_phy;
> +
> +struct usb_phy_ops {
> + int (*open)(struct tegra_usb_phy *phy);
> + void (*close)(struct tegra_usb_phy *phy);
> + int (*power_on)(struct tegra_usb_phy *phy);
> + int (*power_off)(struct tegra_usb_phy *phy);
> + void (*preresume)(struct tegra_usb_phy *phy);
> + void (*postresume)(struct tegra_usb_phy *phy);
> + void (*restore_start)(struct tegra_usb_phy *phy,
> + enum tegra_usb_phy_port_speed port_speed);
> + void (*restore_end)(struct tegra_usb_phy *phy);
> +};
> +
> struct tegra_xtal_freq;
>
> +struct phy_params {
> + void *config;
> + enum tegra_usb_phy_mode mode;
> + enum tegra_usb_phy_type type;
> +};
> +
> struct tegra_usb_phy {
> int instance;
> const struct tegra_xtal_freq *freq;
> @@ -58,15 +84,13 @@ struct tegra_usb_phy {
> void *config;
> struct usb_phy *ulpi;
> struct usb_phy u_phy;
> + struct usb_phy_ops ops;
> + enum tegra_usb_phy_type type;
> struct device *dev;
> };
>
> struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
> - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
> -
> -void tegra_usb_phy_clk_disable(struct tegra_usb_phy *phy);
> -
> -void tegra_usb_phy_clk_enable(struct tegra_usb_phy *phy);
> + void __iomem *regs, struct phy_params *params);
>
> void tegra_usb_phy_preresume(struct tegra_usb_phy *phy);
>
> --
> 1.7.0.4
>
--
balbi
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists