| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <50853121.3040803@cfl.rr.com>
Date: Mon, 22 Oct 2012 07:42:25 -0400
From: Mark Hounschell <dmarkh@....rr.com>
To: Bruno Prémont <bonbons@...ux-vserver.org>
CC: linux-kernel@...r.kernel.org,
"markh@...pro.net >> Mark Hounschell" <markh@...pro.net>,
Intel Graphics Development <intel-gfx@...ts.freedesktop.org>
Subject: Re: [Intel-gfx] drm_kms_helper problems
On 10/21/2012 03:18 PM, Bruno Prémont wrote:
> Hi Mark,
>
> On Sun, 21 October 2012 Mark Hounschell <dmarkh@....rr.com> wrote:
>> On 10/21/2012 10:58 AM, Bruno Prémont wrote:
>>> On Sun, 21 October 2012 Mark Hounschell <dmarkh@....rr.com> wrote:
>>>> I have a TV that appears to not provide proper EDID info to the HDMI or DVI
>>>> ports of my Intel DH77DF motherboard. I received some pointers from this
>>>> list that pointed me in the direction of creating my own EDID file and I
>>>> now have a binary blob that matches what the service manual says is the
>>>> proper EDID info.
>>>>
>>>> But I am unable to get the drm_kms_helper module to load and use this file.
>>>> My relevant kernel config options are.
>>>>
>>>> CONFIG_DRM_KMS_HELPER=m
>>>> CONFIG_DRM_LOAD_EDID_FIRMWARE=y
>>>>
>>>> my relevant kernel command line contains:
>>>>
>>>> video=card0-HDMI-A-1:e
>>>> drm_kms_helper.edid_firmware=card0-HDMI-A-1:edid/lg42lb9df_hdmi1.edid
>>>
>>> The variant without card0- should be the right one.
>>>
>>
>> OK. Changed it. What if I had more than one video card?
>
> Two connectors from two distinct card should not get the same suffix number
> even if they use same technology, so it should work. (unless something was
> changed recently)
>
>>>> The edid file:
>>>> # ls -al /lib/firmware/edid/lg42lb9df_hdmi1.edid
>>>> -rw-r--r-- 1 root root 256 Oct 16 05:46 /lib/firmware/edid/lg42lb9df_hdmi1.edid
>>>>
>>>> connector info from /sys/class/drm/
>>>>
>>>> card0 card0-DP-1 card0-DP-2 card0-DP-3 card0-HDMI-A-1 card0-HDMI-A-2
>>>> card0-HDMI-A-3 card0-VGA-1 controlD64 version
>>>>
>>
>> Which should I use? HDMI-A-1, HDMI-A-2, or HDMI-A-3? Why re there 3??
>>
>>>> And I don't really understand why I have 3 entries for the one hdmi port?
>>>> Nor do I really understand _exactly_ how to define the connector in my
>>>> kernel command line or which of the 3 connectors from /sys I should be
>>>> using. I've tried different variants. Ie. card0-HDMI-A-1and HDMI-A-1.
>>>>
>>>> The results in the kernel log file remain:
>>>>
>>>> [ 1.879654] drm_kms_helper: Unknown parameter `edid'
>>>
>>> As your drm_kms_helper is built modular, did you try not putting that
>>> parameter on kernel cmdline but rather put it in modprobe's configuration
>>> for that module? (may doing the whole loading manually).
>>>
>>
>> I've created a /etc/modprobe.d/20-drm_kms_helper.conf with:
>> options drm_kms_helper edid_firmware=HDMI-A-1:edid/lg42lb9df_hdmi1.edid
>> and now I'm getting something different. It looks like it's trying. In fact
>> I actually get a screen on the TV now. It's not 1920x1080 but 1024x768 at
>> 60hz.
>
> As things get slightly better now, check what kernel detected:
> - /sys/module/drm_kms_helper/parameters/edid_firmware
> (should contain the path to firmware file)
>
> Make sure both the firmware and modprobe config get included in your initrd
> if you're using one.
>
>> [ 1.883124] load_module: Calling parse_args for module = drm_kms_helper
>> args = edid_firmware=HDMI-A-1:edid/lg42lb9df_hdmi1.edid
>> [ 1.883126]
>> [ 1.883126] parse_args: (1) Entered for drm_kms_helper
>> [ 1.883127]
>> [ 1.883127] parse_args: (2) Entered for drm_kms_helper
>> [ 1.883127] parse_args: doing = drm_kms_helper
>> [ 1.883128] parse_args: args =
>> edid_firmware=HDMI-A-1:edid/lg42lb9df_hdmi1.edid
>> F\xffffffc9\xfffffff8h\xffffff89\xffffff86\xffffffc0\xffffff80\xffffffff\xffffffff\xffffffd4R\xffffffc9\xfffffff8TF\xffffffc9\xfffffff88\xffffff89\xffffff86\xffffffc0\xffffffa4\xffffffff\xffffffffdF\xffffffc9\xfffffff8
>> [ 1.883129] parse_args: num = 2
>> [ 1.883130] parse_args: min_level = -32768
>> [ 1.883131] parse_args: max_level = 32767
>> [ 1.883132]
>> F\xffffffc9\xfffffff8h\xffffff89\xffffff86\xffffffc0\xffffff80\xffffffff\xffffffff\xffffffd4R\xffffffc9\xfffffff8TF\xffffffc9\xfffffff88\xffffff89\xffffff86\xffffffc0\xffffffa4\xffffffff\xffffffffdF\xffffffc9\xfffffff8,
>> num=2, min_level=-32768, max_level=32767
>> [ 1.886855]
>> .
>> .
>> .
>> [ 2.132749] [drm] forcing HDMI-A-1 connector ON
>> [ 2.132752] [drm] forcing HDMI-A-2 connector ON
>> [ 2.132753] [drm] forcing HDMI-A-3 connector ON
>>
>> [ 2.189769] [drm:edid_load] *ERROR* Requesting EDID firmware
>> "edid/lg42lb9df_hdmi1.edid" failed (err=-2)
>
> Interesting, kernel/udev can't find the edid file but know what file
> to look for... Is the edid file available at that time (initrd?)?
>
>> I get a couple of the above messages.
>>
>>
>> [ 2.388623] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid,
>> remainder is 130
>> [ 2.388631] Raw EDID:
>> [ 2.388635] 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
>
> That's as ago with getting edid from hardware.
>
>>> # modprobe drm_kms_helper edid_firmware=HDMI-A-1:edid/lg42lb9df_hdmi1.edid
>>>
>>
>> I can't seem to rm the modules already loaded to try this.
>
> There are multiple steps needed to be able to rmmod those modules:
> - stop DRM users (e.g. X)
> - disable fbcon
> echo 1 > /sys/class/vtcon0/bind
> echo 0 > /sys/class/vtcon1/bind
> (assuming vtcon1 is fbcon, vtcon0 is VGA console)
> - rmmod i915
> - rmmod drm_kms_helper
>
> Note that at time of modprobing i915 connectors will have different names!
> (probably HDMI-A-4, HDMI-A-5, HDMI-A-6)
>
> Alternatively you could blacklist all drm modules so they don't get loaded
> automatically and you can load them manually one at a time when system has
> booted.
>
It turns out the boot params "video=HDMI-A-1:e video=HDMI-A-2:e
video=HDMI-A-3:e" are what actually turned the tv "on". They seem to
default to "d". In any case I now have only that in my grub file except for
the "video=1024x768" and I'm not really sure what that actually does.
My /etc/modprobe.d/20-drm_kms_helper.conf contains:
options drm_kms_helper edid_firmware=HDMI-A-1:edid/lg42lb9df_hdmi1.edid
How can I add the other connector info to that file BTW?
It now looks like it is finding the edid file.
# cat /sys/module/drm_kms_helper/parameters/edid_firmware
HDMI-A-1:edid/lg42lb9df_hdmi1.edid
What I End up with is a 1024x768 on both the DVI and HDMI port outputs and
then every 5-10 seconds the below gets spewed to the log file and the
system is unresponsive while this occures. I don't understand why this
messes up the DVI port. With no 20-drm_kms_helper.conf file the DVI port
get 1600x1200
geexbox:/home/markh # tail -f /var/log/messages
Oct 22 03:25:12 geexbox kernel: [ 174.716622] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716623] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716625] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716626] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716628] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716629] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716639] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716640] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:12 geexbox kernel: [ 174.716642] i915 0000:00:02.0: HDMI-A-3:
EDID block 0 invalid.
Oct 22 03:25:13 geexbox su: (to root) markh on /dev/pts/0
Oct 22 03:25:21 geexbox kernel: [ 183.760787] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:21 geexbox kernel: [ 183.760791] Raw EDID:
Oct 22 03:25:21 geexbox kernel: [ 183.760794] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760795] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760797] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760798] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760800] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760801] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760802] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.760804] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873788] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:21 geexbox kernel: [ 183.873791] Raw EDID:
Oct 22 03:25:21 geexbox kernel: [ 183.873793] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873795] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873796] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873798] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873799] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873800] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873802] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:21 geexbox kernel: [ 183.873803] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986796] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 183.986799] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 183.986801] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986802] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986804] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986805] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986807] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986808] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986810] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 183.986811] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099814] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 184.099817] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 184.099819] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099821] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099822] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099824] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099825] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099826] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099828] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099829] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.099841] i915 0000:00:02.0: HDMI-A-3:
EDID block 0 invalid.
Oct 22 03:25:22 geexbox kernel: [ 184.331124] [drm] Got external EDID base
block and 1 extension from "edid/lg42lb9df_hdmi1.edid" for connector "HDMI-A-1"
Oct 22 03:25:22 geexbox kernel: [ 184.462110] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 184.462113] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 184.462115] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462117] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462118] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462120] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462121] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462122] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462124] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.462134] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575122] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 184.575125] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 184.575127] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575128] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575130] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575131] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575133] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575142] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575143] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.575143] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688133] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 184.688136] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 184.688138] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688140] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688141] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688143] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688144] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688145] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688147] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.688148] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801139] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:22 geexbox kernel: [ 184.801142] Raw EDID:
Oct 22 03:25:22 geexbox kernel: [ 184.801144] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801145] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801147] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801148] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801150] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801151] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801152] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801162] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:22 geexbox kernel: [ 184.801164] i915 0000:00:02.0: HDMI-A-3:
EDID block 0 invalid.
Oct 22 03:25:23 geexbox kernel: [ 185.017189] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:23 geexbox kernel: [ 185.017192] Raw EDID:
Oct 22 03:25:23 geexbox kernel: [ 185.017194] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017196] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017197] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017199] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017200] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017202] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017203] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.017204] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130197] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:23 geexbox kernel: [ 185.130200] Raw EDID:
Oct 22 03:25:23 geexbox kernel: [ 185.130202] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130204] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130205] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130206] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130208] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130209] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130211] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.130212] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243209] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:23 geexbox kernel: [ 185.243212] Raw EDID:
Oct 22 03:25:23 geexbox kernel: [ 185.243214] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243216] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243217] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243218] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243220] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243221] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243223] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.243224] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356218] [drm:drm_edid_block_valid]
*ERROR* EDID checksum is invalid, remainder is 130
Oct 22 03:25:23 geexbox kernel: [ 185.356221] Raw EDID:
Oct 22 03:25:23 geexbox kernel: [ 185.356223] 00 ff ff ff ff ff
ff 00 ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356224] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356226] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356227] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356228] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356230] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356231] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356233] ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff
Oct 22 03:25:23 geexbox kernel: [ 185.356245] i915 0000:00:02.0: HDMI-A-3:
EDID block 0 invalid.
Should I maybe add the info for the other connectrs to the modprobe file?
If so what would be the syntax?
dmesg attached
Thanks
Mark
View attachment "dmesg" of type "text/plain" (196299 bytes)
Powered by blists - more mailing lists