[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5087FF0C.7050303@free-electrons.com>
Date: Wed, 24 Oct 2012 16:45:32 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Andrew Lunn <andrew@...n.ch>
CC: Lior Amsalem <alior@...vell.com>, Ike Pan <ike.pan@...onical.com>,
Nadav Haklai <nadavh@...vell.com>,
Ian Molton <ian.molton@...ethink.co.uk>,
David Marlin <dmarlin@...hat.com>,
Yehuda Yitschak <yehuday@...vell.com>,
Jani Monoses <jani.monoses@...onical.com>,
Tawfik Bayouk <tawfik@...vell.com>,
Dan Frazier <dann.frazier@...onical.com>,
Eran Ben-Avi <benavi@...vell.com>,
Leif Lindholm <leif.lindholm@....com>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Jason Cooper <jason@...edaemon.net>,
Arnd Bergmann <arnd@...db.de>, Jon Masters <jcm@...hat.com>,
Ben Dooks <ben-linux@...ff.org>,
linux-arm-kernel@...ts.infradead.org,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Chris Van Hoof <vanhoof@...onical.com>,
Nicolas Pitre <nico@...xnic.net>, linux-kernel@...r.kernel.org,
Maen Suleiman <maen@...vell.com>,
Shadi Ammouri <shadi@...vell.com>,
Olof Johansson <olof@...om.net>
Subject: Re: [PATCH 2/2] arm: mvebu: adding SATA support: dt binding and config
update
On 10/24/2012 04:08 PM, Andrew Lunn wrote:
> On Wed, Oct 24, 2012 at 03:49:21PM +0200, Gregory CLEMENT wrote:
>> From: Lior Amsalem <alior@...vell.com>
>>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
>> Signed-off-by: Lior Amsalem <alior@...vell.com>
>> ---
>> arch/arm/boot/dts/armada-370-db.dts | 3 +++
>> arch/arm/boot/dts/armada-370-xp.dtsi | 10 ++++++++++
>> arch/arm/boot/dts/armada-xp-db.dts | 3 +++
>> arch/arm/configs/mvebu_defconfig | 7 +++++++
>> 4 files changed, 23 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
>> index 4a31b03..2a2aa75 100644
>> --- a/arch/arm/boot/dts/armada-370-db.dts
>> +++ b/arch/arm/boot/dts/armada-370-db.dts
>> @@ -34,5 +34,8 @@
>> clock-frequency = <200000000>;
>> status = "okay";
>> };
>> + sata@...a0000 {
>> + status = "okay";
>> + };
>> };
>> };
>> diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
>> index 94b4b9e..3f08233 100644
>> --- a/arch/arm/boot/dts/armada-370-xp.dtsi
>> +++ b/arch/arm/boot/dts/armada-370-xp.dtsi
>> @@ -69,6 +69,16 @@
>> compatible = "marvell,armada-addr-decoding-controller";
>> reg = <0xd0020000 0x258>;
>> };
>> +
>> + sata@...a0000 {
>> + compatible = "marvell,orion-sata";
>> + reg = <0xd00a0000 0x2400>;
>> + interrupts = <55>;
>> + nr-ports = <2>;
>> + clocks = <&coreclk 0>;//, <&coreclk 0>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>>
>> diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
>> index b1fc728..b0db9a3 100644
>> --- a/arch/arm/boot/dts/armada-xp-db.dts
>> +++ b/arch/arm/boot/dts/armada-xp-db.dts
>> @@ -46,5 +46,8 @@
>> clock-frequency = <250000000>;
>> status = "okay";
>> };
>> + sata@...a0000 {
>> + status = "okay";
>> + };
>> };
>> };
>
> Hi Gregory
>
> Should there be some pinctrl setup somewhere, to ensure the pins used
> for SATA are really setup up for SATA?
Yes you're right we should not depend of the bootloader configuration.
>
> Also, for kirkwood, the number of SATA ports varies. So we don't
> define it in the base kirkwood.dtsi and leave each board to set it.
> Do we want to be consistent between kirkwood and 370/xp?
Yes sure. I will move it from dtsi to dts.
>
> Thanks
> Andrew
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists