[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <518397C60809E147AF5323E0420B992E3E9D597B@DBDE01.ent.ti.com>
Date: Tue, 30 Oct 2012 09:41:31 +0000
From: "Philip, Avinash" <avinashphilip@...com>
To: "Porter, Matt" <mporter@...com>, Tony Lindgren <tony@...mide.com>,
"Nori, Sekhar" <nsekhar@...com>,
Grant Likely <grant.likely@...retlab.ca>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
"Cousson, Benoit" <b-cousson@...com>,
Russell King <linux@....linux.org.uk>,
Vinod Koul <vinod.koul@...el.com>,
Rob Landley <rob@...dley.net>, Chris Ball <cjb@...top.org>
CC: Linux DaVinci Kernel List
<davinci-linux-open-source@...ux.davincidsp.com>,
Arnd Bergmann <arnd@...db.de>,
Linux Documentation List <linux-doc@...r.kernel.org>,
Devicetree Discuss <devicetree-discuss@...ts.ozlabs.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <rob.herring@...xeda.com>,
Dan Williams <djbw@...com>,
Linux SPI Devel List
<spi-devel-general@...ts.sourceforge.net>,
Linux OMAP List <linux-omap@...r.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [RFC PATCH v3 16/16] ARM: dts: add AM33XX SPI support
On Mon, Oct 29, 2012 at 14:40:02, Philip, Avinash wrote:
> On Thu, Oct 18, 2012 at 18:56:55, Porter, Matt wrote:
> > Adds AM33XX SPI support for am335x-bone and am335x-evm.
Matt,
Can you build SPI DT patch with DMA support on top of SPI DT patch
I submitted [1]. With the patch [1] SPI can work on PIO mode.
So we can have basic SPI support available in 3.8.
Benoit,
Can you accept the SPI DT patch [1]
In case if you want I will resubmit a patch with subject line modified.
Current subject line
arm/dts: AM33XX: Add SPI device tree data
1. https://patchwork.kernel.org/patch/1470661/
Thanks
Avinash
> >
> > Signed-off-by: Matt Porter <mporter@...com>
> > ---
> > arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
> > arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++
> > arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 69 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
> > index 5510979..23edfd8 100644
> > --- a/arch/arm/boot/dts/am335x-bone.dts
> > +++ b/arch/arm/boot/dts/am335x-bone.dts
> > @@ -18,6 +18,17 @@
> > reg = <0x80000000 0x10000000>; /* 256 MB */
> > };
> >
> > + am3358_pinmux: pinmux@...10800 {
> > + spi1_pins: pinmux_spi1_pins {
> > + pinctrl-single,pins = <
> > + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
> > + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
> > + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
> > + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
> > + >;
> > + };
> > + };
> > +
>
> Change to am33xx_pinmux.
>
> > ocp {
> > uart1: serial@...09000 {
> > status = "okay";
> > @@ -84,3 +95,9 @@
> > &mmc1 {
> > vmmc-supply = <&ldo3_reg>;
> > };
> > +
> > +&spi1 {
> > + status = "okay";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&spi1_pins>;
> > +};
> > diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> > index d63fce8..8d5f660 100644
> > --- a/arch/arm/boot/dts/am335x-evm.dts
> > +++ b/arch/arm/boot/dts/am335x-evm.dts
> > @@ -124,3 +124,12 @@
> > &mmc1 {
> > vmmc-supply = <&vmmc_reg>;
> > };
> > +
> > +&spi0 {
> > + status = "okay";
> > + spi-flash@0 {
> > + compatible = "spansion,s25fl064k", "m25p80";
> > + spi-max-frequency = <24000000>;
> > + reg = <0>;
> > + };
> > +};
>
> In AM335x-evm, SPI flash available in profile #2 (am335x evm specific profiles).
> So can you drop this changes as if I understood correctly, am335x-evm.dts will be
> populated for devices present only on profile #0.
>
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index 26a6af7..063ecea 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -40,6 +40,15 @@
> > };
> > };
> >
> > + am3358_pinmux: pinmux@...10800 {
> > + compatible = "pinctrl-single";
> > + reg = <0x44e10800 0x0238>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-single,register-width = <32>;
> > + pinctrl-single,function-mask = <0x7f>;
> > + };
> > +
>
> Pin ctrl support already submitted
> http://git.kernel.org/?p=linux/kernel/git/bcousson/linux-omap-dt.git;a=commitdiff;h=3e0603e905d9ba662e8c1885ecb1d28bc454e448
>
> Thanks
> Avinash
>
> > /*
> > * XXX: Use a flat representation of the AM33XX interconnect.
> > * The real AM33XX interconnect network is quite complex.Since
> > @@ -261,6 +270,40 @@
> > status = "disabled";
> > };
> >
> > + spi0: spi@...30000 {
> > + compatible = "ti,omap4-mcspi";
> > + ti,hwmods = "spi0";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x48030000 0x400>;
> > + interrupt-parent = <&intc>;
> > + interrupt = <65>;
> > + dmas = <&edma 16
> > + &edma 17
> > + &edma 18
> > + &edma 19>;
> > + dma-names = "tx0", "rx0", "tx1", "rx1";
> > + ti,spi-num-cs = <2>;
> > + status = "disabled";
> > + };
> > +
> > + spi1: spi@...a0000 {
> > + compatible = "ti,omap4-mcspi";
> > + ti,hwmods = "spi1";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + reg = <0x481a0000 0x400>;
> > + interrupt-parent = <&intc>;
> > + interrupt = <125>;
> > + dmas = <&edma 42
> > + &edma 43
> > + &edma 44
> > + &edma 45>;
> > + dma-names = "tx0", "rx0", "tx1", "rx1";
> > + ti,spi-num-cs = <2>;
> > + status = "disabled";
> > + };
> > +
> > wdt2: wdt@...35000 {
> > compatible = "ti,omap3-wdt";
> > ti,hwmods = "wd_timer2";
> > --
> > 1.7.9.5
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists