| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 31 Oct 2012 09:17:52 +0000
From: Alexandra Chin <alexandra.chin@...synaptics.com>
To: Henrik Rydberg <rydberg@...omail.se>
CC: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Linux Input <linux-input@...r.kernel.org>,
Linus Walleij <linus.walleij@...ricsson.com>,
Naveen Kumar Gaddipati <naveen.gaddipati@...ricsson.com>,
Mahesh Srinivasan <msrinivasan@...aptics.com>,
Alex Chang <alex.chang@...synaptics.com>,
Scott Lin <scott.lin@...synaptics.com>,
Christopher Heiny <Cheiny@...aptics.com>
Subject: [PATCH] staging: ste_rmi4: Convert to Type-B support
>From 4d0dbd9ee464027e7c40658abb9dd019be520e4d Mon Sep 17 00:00:00 2001
From: Alexandra Chin <alexandra.chin@...synaptics.com>
Date: Wed, 31 Oct 2012 16:21:12 +0800
Subject: [PATCH] staging: ste_rmi4: Convert to Type-B support
This patch:
- Convert to MT-B because Synaptics touch devices are capable of
tracking identifiable fingers
- Modify maximum supported fingers up to 10
- Set INPUT_PROP_POINTER for direct input devices
Any comments and suggestions are welcomed.
Alexandra Chin
Signed-off-by: Alexandra Chin <alexandra.chin@...synaptics.com>
---
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c | 82 ++++++++++++------------
1 files changed, 41 insertions(+), 41 deletions(-)
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index 11728a0..e69ca5ee1 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
+#include <linux/input/mt.h>
#include "synaptics_i2c_rmi4.h"
/* TODO: for multiple device support will need a per-device mutex */
@@ -67,7 +68,7 @@
#define PDT_START_SCAN_LOCATION (0x00E9)
#define PDT_END_SCAN_LOCATION (0x000A)
#define PDT_ENTRY_SIZE (0x0006)
-#define RMI4_NUMBER_OF_MAX_FINGERS (8)
+#define RMI4_NUMBER_OF_MAX_FINGERS (10)
#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
@@ -164,6 +165,8 @@ struct synaptics_rmi4_device_info {
* @regulator: pointer to the regulator structure
* @wait: wait queue structure variable
* @touch_stopped: flag to stop the thread function
+ * @finger_state: previous state of fingers
+ * @fingers_supported: maximum supported fingers
*
* This structure gives the device data information.
*/
@@ -184,6 +187,8 @@ struct synaptics_rmi4_data {
struct regulator *regulator;
wait_queue_head_t wait;
bool touch_stopped;
+ unsigned char finger_state[RMI4_NUMBER_OF_MAX_FINGERS];
+ unsigned char fingers_supported;
};
/**
@@ -303,7 +308,6 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
/* number of touch points - fingers down in this case */
int touch_count = 0;
int finger;
- int fingers_supported;
int finger_registers;
int reg;
int finger_shift;
@@ -314,10 +318,8 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
unsigned char data_reg_blk_size;
unsigned char values[2];
unsigned char data[DATA_LEN];
- int x[RMI4_NUMBER_OF_MAX_FINGERS];
- int y[RMI4_NUMBER_OF_MAX_FINGERS];
- int wx[RMI4_NUMBER_OF_MAX_FINGERS];
- int wy[RMI4_NUMBER_OF_MAX_FINGERS];
+ int x, y;
+ int wx, wy;
struct i2c_client *client = pdata->i2c_client;
/* get 2D sensor finger data */
@@ -333,8 +335,7 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
* 10 = finger present but data may not be accurate,
* 11 = reserved for product use.
*/
- fingers_supported = rfi->num_of_data_points;
- finger_registers = (fingers_supported + 3)/4;
+ finger_registers = (pdata->fingers_supported + 3)/4;
data_base_addr = rfi->fn_desc.data_base_addr;
retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
finger_registers);
@@ -348,17 +349,26 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
* to get absolute data.
*/
data_reg_blk_size = rfi->size_of_data_register_block;
- for (finger = 0; finger < fingers_supported; finger++) {
+ for (finger = 0; finger < pdata->fingers_supported; finger++) {
/* determine which data byte the finger status is in */
reg = finger/4;
/* bit shift to get finger's status */
finger_shift = (finger % 4) * 2;
- finger_status = (values[reg] >> finger_shift) & 3;
+ finger_status = (values[reg] >> finger_shift) & MASK_2BIT;
/*
* if finger status indicates a finger is present then
* read the finger data and report it
*/
- if (finger_status == 1 || finger_status == 2) {
+ if (!finger_status && !pdata->finger_state[finger])
+ continue;
+
+ input_mt_slot(pdata->input_dev, finger);
+ input_mt_report_slot_state(pdata->input_dev,
+ MT_TOOL_FINGER, finger_status);
+
+ if (!finger_status && pdata->finger_state[finger]) {
+ /* release event */
+ } else {
/* Read the finger data */
data_offset = data_base_addr +
((finger * data_reg_blk_size) +
@@ -371,44 +381,30 @@ static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
__func__);
return 0;
} else {
- x[touch_count] =
- (data[0] << 4) | (data[2] & MASK_4BIT);
- y[touch_count] =
- (data[1] << 4) |
- ((data[2] >> 4) & MASK_4BIT);
- wy[touch_count] =
- (data[3] >> 4) & MASK_4BIT;
- wx[touch_count] =
- (data[3] & MASK_4BIT);
+ x = (data[0] << 4) | (data[2] & MASK_4BIT);
+ y = (data[1] << 4)
+ | ((data[2] >> 4) & MASK_4BIT);
+ wy = (data[3] >> 4) & MASK_4BIT;
+ wx = (data[3] & MASK_4BIT);
if (pdata->board->x_flip)
- x[touch_count] =
- pdata->sensor_max_x -
- x[touch_count];
+ x = pdata->sensor_max_x - x;
if (pdata->board->y_flip)
- y[touch_count] =
- pdata->sensor_max_y -
- y[touch_count];
+ y = pdata->sensor_max_y - y;
}
+ input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
+ max(wx, wy));
+ input_report_abs(pdata->input_dev,
+ ABS_MT_POSITION_X, x);
+ input_report_abs(pdata->input_dev,
+ ABS_MT_POSITION_Y, y);
+
/* number of active touch points */
touch_count++;
}
+ pdata->finger_state[finger] = finger_status;
}
- /* report to input subsystem */
- if (touch_count) {
- for (finger = 0; finger < touch_count; finger++) {
- input_report_abs(pdata->input_dev, ABS_MT_TOUCH_MAJOR,
- max(wx[finger] , wy[finger]));
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_X,
- x[finger]);
- input_report_abs(pdata->input_dev, ABS_MT_POSITION_Y,
- y[finger]);
- input_mt_sync(pdata->input_dev);
- }
- } else
- input_mt_sync(pdata->input_dev);
-
/* sync after groups of events */
input_sync(pdata->input_dev);
/* return the number of touch points */
@@ -575,6 +571,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
if ((queries[1] & MASK_3BIT) == 5)
rfi->num_of_data_points = 10;
}
+ pdata->fingers_supported = rfi->num_of_data_points;
/* Need to get interrupt info for handling interrupts */
rfi->index_to_intr_reg = (interruptcount + 7)/8;
if (rfi->index_to_intr_reg != 0)
@@ -981,13 +978,16 @@ static int __devinit synaptics_rmi4_probe
set_bit(EV_SYN, rmi4_data->input_dev->evbit);
set_bit(EV_KEY, rmi4_data->input_dev->evbit);
set_bit(EV_ABS, rmi4_data->input_dev->evbit);
-
+#ifdef INPUT_PROP_DIRECT
+ set_bit(INPUT_PROP_DIRECT, rmi4_data->input_dev->propbit);
+#endif
input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_X, 0,
rmi4_data->sensor_max_x, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_Y, 0,
rmi4_data->sensor_max_y, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
+ input_mt_init_slots(rmi4_data->input_dev, rmi4_data->fingers_supported);
/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists