Message-Id: <cover.1352196505.git.viresh.kumar@linaro.org>
Date:	Tue,  6 Nov 2012 16:08:42 +0530
From:	Viresh Kumar <viresh.kumar@...aro.org>
To:	pjt@...gle.com, paul.mckenney@...aro.org, tglx@...utronix.de,
	tj@...nel.org, suresh.b.siddha@...el.com, venki@...gle.com,
	mingo@...hat.com, peterz@...radead.org, rostedt@...dmis.org
Cc:	Arvind.Chauhan@....com, linaro-dev@...ts.linaro.org,
	patches@...aro.org, pdsw-power-team@....com,
	linux-kernel@...r.kernel.org, linux-rt-users@...r.kernel.org,
	Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V2 Resend 0/4] Create sched_select_cpu() and use it for workqueues and timers

Hi All,

This is V2 Resend of my sched_select_cpu() work. Resend because didn't got much
attention on V2. Including more guys now in cc :)

In order to save power, it would be useful to schedule work onto non-IDLE cpus
instead of waking up an IDLE one.

To achieve this, we need scheduler to guide kernel frameworks (like: timers &
workqueues) on which is the most preferred CPU that must be used for these
tasks.

This patchset is about implementing this concept.

- The first patch adds sched_select_cpu() routine which returns the preferred
  cpu which is non-idle.
- Second patch removes idle_cpu() calls from timer & hrtimer.
- Third patch is about adapting this change in workqueue framework.
- Fourth patch add migration capability in running timer

Earlier discussions over v1 can be found here:
http://www.mail-archive.com/linaro-dev@lists.linaro.org/msg13342.html

Earlier discussions over this concept were done at last LPC:
http://summit.linuxplumbersconf.org/lpc-2012/meeting/90/lpc2012-sched-timer-workqueue/

Module created for testing this behavior is present here:
http://git.linaro.org/gitweb?p=people/vireshk/module.git;a=summary

Following are the steps followed in test module:
1. Run single work on each cpu
2. This work will start a timer after x (tested with 10) jiffies of delay
3. Timer routine queues a work... (This may be called from idle or non-idle cpu)
   and starts the same timer again STEP 3 is done for n number of times (i.e.
   queuing n works, one after other)
4. All works will call a single routine, which will count following per cpu:
 - Total works processed by a CPU
 - Total works processed by a CPU, which are queued from it
 - Total works processed by a CPU, which aren't queued from it

Setup:
-----
- ARM Vexpress TC2 - big.LITTLE CPU
- Core 0-1: A15, 2-4: A7
- rootfs: linaro-ubuntu-nano

Results:
-------
Without Workqueue Modification, i.e. PATCH 3/3:
[ 2493.022335] Workqueue Analyser: works processsed by CPU0, Total: 1000, Own: 0, migrated: 0
[ 2493.047789] Workqueue Analyser: works processsed by CPU1, Total: 1000, Own: 0, migrated: 0
[ 2493.072918] Workqueue Analyser: works processsed by CPU2, Total: 1000, Own: 0, migrated: 0
[ 2493.098576] Workqueue Analyser: works processsed by CPU3, Total: 1000, Own: 0, migrated: 0
[ 2493.123702] Workqueue Analyser: works processsed by CPU4, Total: 1000, Own: 0, migrated: 0

With Workqueue Modification, i.e. PATCH 3/3:
[ 2493.022335] Workqueue Analyser: works processsed by CPU0, Total: 1002, Own: 999, migrated: 3
[ 2493.047789] Workqueue Analyser: works processsed by CPU1, Total: 998,  Own: 997, migrated: 1
[ 2493.072918] Workqueue Analyser: works processsed by CPU2, Total: 1013, Own: 996, migrated: 17
[ 2493.098576] Workqueue Analyser: works processsed by CPU3, Total: 998,  Own: 993, migrated: 5
[ 2493.123702] Workqueue Analyser: works processsed by CPU4, Total: 989,  Own: 987, migrated: 2

V2->V2-Resend
-------------
- Included timer migration patch in the same thread.

V1->V2
-----
- New SD_* macros removed now and earlier ones used
- sched_select_cpu() rewritten and it includes the check on current cpu's
  idleness.
- cpu_idle() calls from timer and hrtimer removed now.
- Patch 2/3 from V1, removed as it doesn't apply to latest workqueue branch from
  tejun.
- CONFIG_MIGRATE_WQ removed and so is wq_select_cpu()
- sched_select_cpu() called only from __queue_work()
- got tejun/for-3.7 branch in my tree, before making workqueue changes.

Viresh Kumar (4):
  sched: Create sched_select_cpu() to give preferred CPU for power
    saving
  timer: hrtimer: Don't check idle_cpu() before calling
    get_nohz_timer_target()
  workqueue: Schedule work on non-idle cpu instead of current one
  timer: Migrate running timer

 include/linux/sched.h | 16 ++++++++++--
 include/linux/timer.h |  2 ++
 kernel/hrtimer.c      |  2 +-
 kernel/sched/core.c   | 69 +++++++++++++++++++++++++++++++--------------------
 kernel/timer.c        | 50 ++++++++++++++++++++++---------------
 kernel/workqueue.c    |  4 +--
 6 files changed, 91 insertions(+), 52 deletions(-)

-- 
1.7.12.rc2.18.g61b472e


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists