| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1352720953-24321-22-git-send-email-vgupta@synopsys.com>
Date: Mon, 12 Nov 2012 17:19:10 +0530
From: <Vineet.Gupta1@...opsys.com>
To: <linux-arch@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <tglx@...utronix.de>, <arnd@...db.de>,
Vineet Gupta <Vineet.Gupta1@...opsys.com>
Subject: [RFC Patch v1 52/55] ARC: Support for single cycle Close Coupled Mem (CCM)
From: Vineet Gupta <vgupta@...opsys.com>
* Includes mapping of CCMs in address space
* Annotations to move arbitrary code/data into CCM
* Moving some of the critical code/data into CCM
* Runtime detection/reporting
Signed-off-by: Vineet Gupta <vgupta@...opsys.com>
---
arch/arc/Kconfig | 27 ++++++++++++++++++++
arch/arc/include/asm/linkage.h | 33 +++++++++++++++++++++++++
arch/arc/kernel/entry.S | 4 +-
arch/arc/kernel/setup.c | 53 +++++++++++++++++++++++++++++++++++++++-
arch/arc/kernel/vmlinux.lds.S | 21 ++++++++++++++++
arch/arc/mm/tlbex.S | 5 +--
6 files changed, 137 insertions(+), 6 deletions(-)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 9882ce0c..79e8f2f 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -198,6 +198,33 @@ config ARC_CACHE_PAGES
endif #ARC_CACHE
+config ARC_HAS_ICCM
+ bool "Use ICCM"
+ help
+ Single Cycle RAMS to store Fast Path Code
+ default n
+
+config ARC_ICCM_SZ
+ int "ICCM Size in KB"
+ default "64"
+ depends on ARC_HAS_ICCM
+
+config ARC_HAS_DCCM
+ bool "Use DCCM"
+ help
+ Single Cycle RAMS to store Fast Path Data
+ default n
+
+config ARC_DCCM_SZ
+ int "DCCM Size in KB"
+ default "64"
+ depends on ARC_HAS_DCCM
+
+config ARC_DCCM_BASE
+ hex "DCCM map address"
+ default "0xA0000000"
+ depends on ARC_HAS_DCCM
+
config ARC_HAS_HW_MPY
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
default y
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index a45d1bb..0283e9e 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -25,6 +25,39 @@
.size \ name, ASM_PREV_SYM_ADDR(\name)
.endm
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_DATA nm
+#ifdef CONFIG_ARC_HAS_DCCM
+ .section .data.arcfp
+#else
+ .section .data
+#endif
+ .global \nm
+.endm
+
+/* annotation for data we want in DCCM - if enabled in .config */
+.macro ARCFP_CODE
+#ifdef CONFIG_ARC_HAS_ICCM
+ .section .text.arcfp, "ax",@progbits
+#else
+ .section .text, "ax",@progbits
+#endif
+.endm
+
+#else /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_ARC_HAS_ICCM
+#define __arcfp_code __attribute__((__section__(".text.arcfp")))
+#else
+#define __arcfp_code __attribute__((__section__(".text")))
+#endif
+
+#ifdef CONFIG_ARC_HAS_DCCM
+#define __arcfp_data __attribute__((__section__(".data.arcfp")))
+#else
+#define __arcfp_data __attribute__((__section__(".data")))
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 2ff15e0..873588e 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -155,7 +155,7 @@ VECTOR reserved ; Reserved Exceptions
;##################### Scratch Mem for IRQ stack switching #############
- .section .data ; NOT .global
+ARCFP_DATA int1_saved_reg
.align 32
.type int1_saved_reg, @object
.size int1_saved_reg, 4
@@ -165,7 +165,7 @@ int1_saved_reg:
/* Each Interrupt level needs it's own scratch */
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
- .section .data ; NOT .global
+ARCFP_DATA int2_saved_reg
.type int2_saved_reg, @object
.size int2_saved_reg, 4
int2_saved_reg:
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index d470aa1..0deec55 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -61,6 +61,33 @@ void __init read_arc_build_cfg_regs(void)
cpu->extn.ext_arith = read_aux_reg(ARC_REG_EXTARITH_BCR);
cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR);
+ /* Note that we read the CCM BCRs independent of kernel config
+ * This is to catch the cases where user doesn't know that
+ * CCMs are present in hardware build
+ */
+ {
+ struct bcr_iccm iccm;
+ struct bcr_dccm dccm;
+ struct bcr_dccm_base dccm_base;
+ unsigned int bcr_32bit_val;
+
+ bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
+ if (bcr_32bit_val) {
+ iccm = *((struct bcr_iccm *)&bcr_32bit_val);
+ cpu->iccm.base_addr = iccm.base << 16;
+ cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
+ }
+
+ bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
+ if (bcr_32bit_val) {
+ dccm = *((struct bcr_dccm *)&bcr_32bit_val);
+ cpu->dccm.sz = 0x800 << (dccm.sz);
+
+ READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
+ cpu->dccm.base_addr = dccm_base.addr << 8;
+ }
+ }
+
READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
read_decode_mmu_bcr();
@@ -208,6 +235,30 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
return buf;
}
+void __init arc_chk_ccms(void)
+{
+#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
+ struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+
+#ifdef CONFIG_ARC_HAS_DCCM
+ /*
+ * DCCM can be arbit placed in hardware.
+ * Make sure it's placement/sz matches what Linux is built with
+ */
+ if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
+ panic("Linux built with incorrect DCCM Base address\n");
+
+ if (DCCM_COMPILE_SZ != cpu->dccm.sz)
+ panic("Linux built with incorrect DCCM Size\n");
+#endif
+
+#ifdef CONFIG_ARC_HAS_ICCM
+ if (ICCM_COMPILE_SZ != cpu->iccm.sz)
+ panic("Linux built with incorrect ICCM Size\n");
+#endif
+#endif
+}
+
/*
* Ensure that FP hardware and kernel config match
* -If hardware contains DPFP, kernel needs to save/restore FPU state
@@ -252,7 +303,7 @@ void __init setup_processor(void)
arc_mmu_init();
arc_cache_init();
-
+ arc_chk_ccms();
printk(arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 56c074e..3b6a21a 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -24,6 +24,12 @@ jiffies = jiffies_64;
SECTIONS
{
+ /*
+ * ICCM starts at 0x8000_0000. So if kernel is relocated to some other
+ * address, make sure peripheral at 0x8z doesn't clash with ICCM
+ * Essentially vector is also in ICCM.
+ */
+
. = CONFIG_LINUX_LINK_BASE;
_int_vec_base_lds = .;
@@ -32,6 +38,13 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
}
+#ifdef CONFIG_ARC_HAS_ICCM
+ .text.arcfp : {
+ *(.text.arcfp)
+ . = ALIGN(CONFIG_ARC_ICCM_SZ * 1024);
+ }
+#endif
+
/*
* The reason for having a seperate subsection .init.ramfs is to
* prevent objump from including it in kernel dumps
@@ -135,4 +148,12 @@ SECTIONS
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
+#ifdef CONFIG_ARC_HAS_DCCM
+ . = CONFIG_ARC_DCCM_BASE;
+ __arc_dccm_base = .;
+ .data.arcfp : {
+ *(.data.arcfp)
+ }
+ . = ALIGN(CONFIG_ARC_DCCM_SZ * 1024);
+#endif
}
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index e933e4c..d7631d2 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -54,8 +54,7 @@
; For details refer to comments before TLBMISS_FREEUP_REGS below
;--------------------------------------------------------------------------
- .section .data
- .global ex_saved_reg1
+ARCFP_DATA ex_saved_reg1
.align 1 << L1_CACHE_SHIFT ; IMP: Must be Cache Line aligned
.type ex_saved_reg1, @object
#ifdef CONFIG_SMP
@@ -259,7 +258,7 @@ ex_saved_reg1:
#endif
.endm
-.section .text, "ax",@progbits ;Fast Path Code, candidate for ICCM
+ARCFP_CODE ;Fast Path Code, candidate for ICCM
;-----------------------------------------------------------------------------
; I-TLB Miss Exception Handler
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists