| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <50A16481.5030309@gentoo.org>
Date: Mon, 12 Nov 2012 15:05:05 -0600
From: Matthew Thode <prometheanfire@...too.org>
To: Don Dutile <ddutile@...hat.com>
CC: Doug Goldstein <cardoe@...too.org>, linux-kernel@...r.kernel.org,
bhelgaas@...gle.com, linux-pci@...r.kernel.org, mthode@...ode.org,
iommu@...ts.linux-foundation.org,
Alex Williamson <Alex.Williamson@...hat.com>
Subject: Re: [BUG 3.7-rc5] NULL pointer deref when using a pcie-pci bridged
pci device and intel-iommu
On 11/12/2012 01:57 PM, Don Dutile wrote:
> On 11/12/2012 04:26 AM, Doug Goldstein wrote:
>> On Sun, Nov 11, 2012 at 5:19 PM, Matthew Thode
>> <prometheanfire@...too.org> wrote:
>>> System boots with vt-d disabled in bios. Otherwise I get the errors in
>>> the attached log. I can do whatever testing you need as this system is
>>> not in production yet. gonna paste the important part here. Let me
>>> know if you want anything else.
>>>
>>> Please CC me directly as I am not subscribed to the LKML.
>>>
>>>
>>> Trying to unpack rootfs image as initramfs...
>>> Freeing initrd memory: 5124k freed
>>> IOMMU 0 0xfbffe000: using Queued invalidation
>>> IOMMU: Setting RMRR:
>>> IOMMU: Setting identity map for device 0000:00:1d.0 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.1 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.2 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.7 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.0 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.1 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.2 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.7 [0xbf7ec000 -
>>> 0xbf7fffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.0 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.1 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.2 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1d.7 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.0 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.1 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.2 [0xec000 - 0xeffff]
>>> IOMMU: Setting identity map for device 0000:00:1a.7 [0xec000 - 0xeffff]
>>> IOMMU: Prepare 0-16MiB unity mapping for LPC
>>> IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
>>> PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
>>> BUG: unable to handle kernel NULL pointer dereference at
>>> 000000000000003c
>>> IP: [<ffffffff813bd796>] pci_get_dma_source+0xf/0x41
>>> PGD 0
>>> Oops: 0000 [#1] SMP
>>> Modules linked in:
>>> CPU 7
>>> Pid: 1, comm: swapper/0 Not tainted 3.7.0-rc5 #1 Penguin Computing
>>> Relion 1751/X8DTU
>>> RIP: 0010:[<ffffffff813bd796>] [<ffffffff813bd796>]
>>> pci_get_dma_source+0xf/0x41
>>> RSP: 0000:ffff8806264d1d88 EFLAGS: 00010282
>>> RAX: ffffffff813bd3a8 RBX: ffff8806261d1000 RCX: 00000000e8221180
>>> RDX: ffffffff818624f0 RSI: ffff88062635b0c0 RDI: 0000000000000000
>>> RBP: ffff8806264d1d88 R08: ffff8806263d6000 R09: 00000000ffffffff
>>> R10: ffff8806264d1ca8 R11: 0000000000000005 R12: 0000000000000000
>>> R13: ffff8806261d1098 R14: 0000000000000000 R15: 0000000000000000
>>> FS: 0000000000000000(0000) GS:ffff88063f2e0000(0000)
>>> knlGS:0000000000000000
>>> CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>>> CR2: 000000000000003c CR3: 0000000001c0b000 CR4: 00000000000007e0
>>> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>>> Process swapper/0 (pid: 1, threadinfo ffff8806264d0000, task
>>> ffff8806264cf910)
>>> Stack:
>>> ffff8806264d1dc8 ffffffff815d02c9 0000000000000000 ffff880600000000
>>> ffff8806264d1dd8 ffffffff81c64b00 ffff8806261d1098 ffff8806264d1df8
>>> ffff8806264d1de8 ffffffff815cd5a4 ffffffff81c64b00 ffffffff815cd56a
>>> Call Trace:
>>> [<ffffffff815d02c9>] intel_iommu_add_device+0x95/0x167
>>> [<ffffffff815cd5a4>] add_iommu_group+0x3a/0x41
>>> [<ffffffff815cd56a>] ? bus_set_iommu+0x44/0x44
>>> [<ffffffff8145eca1>] bus_for_each_dev+0x54/0x81
>>> [<ffffffff815cd563>] bus_set_iommu+0x3d/0x44
>>> [<ffffffff81cd3fa3>] intel_iommu_init+0xae5/0xb5e
>>> [<ffffffff81ca0277>] ? free_initrd+0x9e/0x9e
>>> [<ffffffff81ca4248>] ? memblock_find_dma_reserve+0x13f/0x13f
>>> [<ffffffff81ca425e>] pci_iommu_init+0x16/0x41
>>> [<ffffffff81cc4140>] ? pci_proc_init+0x6b/0x6b
>>> [<ffffffff81000231>] do_one_initcall+0x7a/0x129
>>> [<ffffffff816dac14>] kernel_init+0x139/0x2a2
>>> [<ffffffff81c9d4c7>] ? loglevel+0x31/0x31
>>> [<ffffffff816daadb>] ? rest_init+0x6f/0x6f
>>> [<ffffffff816f66ac>] ret_from_fork+0x7c/0xb0
>>> [<ffffffff816daadb>] ? rest_init+0x6f/0x6f
>>> Code: ff c1 75 04 ff d0 eb 12 48 83 c2 10 48 8b 42 08 48 85 c0 75 d3 b8
>>> e7 ff ff ff c9 c3 55 48 c7 c2 f0 24 86 81 48 89 e5 eb 24 8b 0a<66> 3b
>>> 4f 3c 74 05 66 ff c1 75 13 66 8b 4a 02 66 3b 4f 3e 74 05
>>> RIP [<ffffffff813bd796>] pci_get_dma_source+0xf/0x41
>>> RSP<ffff8806264d1d88>
>>> CR2: 000000000000003c
>>> ---[ end trace 5c5a2ceca067e0ec ]---
>>> Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
>>>
>>> ------------[ cut here ]------------
>>> WARNING: at arch/x86/kernel/smp.c:123
>>> native_smp_send_reschedule+0x25/0x51()
>>> Hardware name: Relion 1751
>>> Modules linked in:
>>> Pid: 1, comm: swapper/0 Tainted: G D 3.7.0-rc5 #1
>>> Call Trace:
>>> <IRQ> [<ffffffff810968ee>] warn_slowpath_common+0x80/0x98
>>> [<ffffffff8109691b>] warn_slowpath_null+0x15/0x17
>>> [<ffffffff8104e1a3>] native_smp_send_reschedule+0x25/0x51
>>> [<ffffffff810bc81b>] trigger_load_balance+0x1e8/0x214
>>> [<ffffffff810b731f>] scheduler_tick+0xd8/0xe1
>>> [<ffffffff810a132f>] update_process_times+0x62/0x73
>>> [<ffffffff810cb78b>] tick_sched_timer+0x7c/0x9b
>>> [<ffffffff810b0f83>] __run_hrtimer.clone.24+0x4e/0xc1
>>> [<ffffffff810b15b0>] hrtimer_interrupt+0xc7/0x1ac
>>> [<ffffffff8104ef01>] smp_apic_timer_interrupt+0x81/0x94
>>> [<ffffffff816f71ca>] apic_timer_interrupt+0x6a/0x70
>>> <EOI> [<ffffffff81097ffc>] ? console_unlock+0x2c2/0x2ed
>>> [<ffffffff816f32fc>] ? panic+0x189/0x1c5
>>> [<ffffffff816f3261>] ? panic+0xee/0x1c5
>>> [<ffffffff8109ab6b>] do_exit+0x357/0x7b2
>>> [<ffffffff810371b8>] oops_end+0xb2/0xba
>>> [<ffffffff8105841d>] no_context+0x266/0x275
>>> [<ffffffff810585e7>] __bad_area_nosemaphore+0x1bb/0x1db
>>> [<ffffffff8118de46>] ? sysfs_addrm_finish+0x2f/0xa6
>>> [<ffffffff81058615>] bad_area_nosemaphore+0xe/0x10
>>> [<ffffffff81058bdb>] __do_page_fault+0x360/0x39f
>>> [<ffffffff81394afa>] ? ida_get_new_above+0xf9/0x19e
>>> [<ffffffff8112a077>] ? slab_node+0x59/0xa2
>>> [<ffffffff816f3ffd>] ? mutex_unlock+0x9/0xb
>>> [<ffffffff816da653>] ? klist_put+0x4c/0x70
>>> [<ffffffff816da581>] ? klist_next+0x30/0xb6
>>> [<ffffffff813b8cf9>] ? pci_do_find_bus+0x49/0x49
>>> [<ffffffff81058c42>] do_page_fault+0x9/0xb
>>> [<ffffffff816f6232>] page_fault+0x22/0x30
>>> [<ffffffff813bd3a8>] ? nv_msi_ht_cap_quirk_all+0x10/0x10
>>> [<ffffffff813bd796>] ? pci_get_dma_source+0xf/0x41
>>> [<ffffffff815d02c9>] intel_iommu_add_device+0x95/0x167
>>> [<ffffffff815cd5a4>] add_iommu_group+0x3a/0x41
>>> [<ffffffff815cd56a>] ? bus_set_iommu+0x44/0x44
>>> [<ffffffff8145eca1>] bus_for_each_dev+0x54/0x81
>>> [<ffffffff815cd563>] bus_set_iommu+0x3d/0x44
>>> [<ffffffff81cd3fa3>] intel_iommu_init+0xae5/0xb5e
>>> [<ffffffff81ca0277>] ? free_initrd+0x9e/0x9e
>>> [<ffffffff81ca4248>] ? memblock_find_dma_reserve+0x13f/0x13f
>>> [<ffffffff81ca425e>] pci_iommu_init+0x16/0x41
>>> [<ffffffff81cc4140>] ? pci_proc_init+0x6b/0x6b
>>> [<ffffffff81000231>] do_one_initcall+0x7a/0x129
>>> [<ffffffff816dac14>] kernel_init+0x139/0x2a2
>>> [<ffffffff81c9d4c7>] ? loglevel+0x31/0x31
>>> [<ffffffff816daadb>] ? rest_init+0x6f/0x6f
>>> [<ffffffff816f66ac>] ret_from_fork+0x7c/0xb0
>>> [<ffffffff816daadb>] ? rest_init+0x6f/0x6f
>>> ---[ end trace 5c5a2ceca067e0ed ]---
>>>
>>> --
>>> -- Matthew Thode (prometheanfire)
>>
>> The root cause of Matt's issue is that intel_iommu_add_device() calls
>> pci_get_domain_bus_and_slot() which is returning NULL. Which is not an
>> expected value. The reason NULL is being returned is that Matt has a
>> card with a TI XIO2000A/XIO2200A PCIe-PCI bridge (VID: 104C, DID:
>> 8231) on it. This device already has a quirk setup for disabling fast
>> back to back transfers on its secondary bus. If we cause it to use the
>> primary bus, that appears to resolve the issue. I'm not sure exactly
>> how to proceed from here due to relative lack of knowledge of PCI. Do
>> all PCIe-PCI bridges with secondary buses need their DMA parent to be
>> the primary bus or is that just something that should be done for the
>> TI XIO2000A due to the existing quirk?
>>
> DMA from a (legacy) PCI device does not have a SRC-ID in the transaction,
> so the source of the device generating the DMA is unknown. When bridging
> to a PCIe device, the Parent PPB's dev-id is inserted on the PCIe as the
> source
> of a transaction -- in this case, DMA read/write transaction.
> This (sw) mapping should have happened by default, unless a recent
> change from VFIO
> broke this mapping.... or the TI bridge didn't report itself correctly
> as a PCIe-PCI bridge.
> Alex ?
>
>
>> The failing call with arguments was pci_get_domain_bus_and_slot(0, 5,
>> 0), while pci_get_domain_bus_and_slot(0, 4, 0) resulted in a system
>> that didn't panic and a device that worked.
>>
>> $ lspci -tvn
>> -+-[0000:ff]-+-00.0 8086:2c40
>> | +-00.1 8086:2c01
>> | +-02.0 8086:2c10
>> | +-02.1 8086:2c11
>> | +-02.4 8086:2c14
>> | +-02.5 8086:2c15
>> | +-03.0 8086:2c18
>> | +-03.1 8086:2c19
>> | +-03.2 8086:2c1a
>> | +-03.4 8086:2c1c
>> | +-04.0 8086:2c20
>> | +-04.1 8086:2c21
>> | +-04.2 8086:2c22
>> | +-04.3 8086:2c23
>> | +-05.0 8086:2c28
>> | +-05.1 8086:2c29
>> | +-05.2 8086:2c2a
>> | +-05.3 8086:2c2b
>> | +-06.0 8086:2c30
>> | +-06.1 8086:2c31
>> | +-06.2 8086:2c32
>> | \-06.3 8086:2c33
>> \-[0000:00]-+-00.0 8086:3406
>> +-01.0-[01]--+-00.0 8086:10c9
>> | \-00.1 8086:10c9
>> +-03.0-[02]--
>> +-05.0-[03]--
>> +-07.0-[04-05]----00.0-[05]----08.0 d161:8006
>> +-09.0-[06]----00.0 8086:10b9
>> +-13.0 8086:342d
>> +-14.0 8086:342e
>> +-14.1 8086:3422
>> +-14.2 8086:3423
>> +-14.3 8086:3438
>> +-16.0 8086:3430
>> +-16.1 8086:3431
>> +-16.2 8086:3432
>> +-16.3 8086:3433
>> +-16.4 8086:3429
>> +-16.5 8086:342a
>> +-16.6 8086:342b
>> +-16.7 8086:342c
>> +-1a.0 8086:3a37
>> +-1a.1 8086:3a38
>> +-1a.2 8086:3a39
>> +-1a.7 8086:3a3c
>> +-1d.0 8086:3a34
>> +-1d.1 8086:3a35
>> +-1d.2 8086:3a36
>> +-1d.7 8086:3a3a
>> +-1e.0-[07]----01.0 102b:0532
>> +-1f.0 8086:3a16
>> +-1f.2 8086:3a22
>> \-1f.3 8086:3a30
>>
>> If someone can craft the correct patch that'd be great or answer the
>> above question and I'll gladly craft it.
>>
>> Thanks.
>
because I didn't see it. Here was the patch that got it working for me
(ignore the printks), applies against 3.6.6 and 3.7-rc5.
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d4a4cd4..df0d7ef 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4118,11 +4118,20 @@ static int intel_iommu_add_device(struct device
*dev)
bridge = pci_find_upstream_pcie_bridge(pdev);
if (bridge) {
- if (pci_is_pcie(bridge))
+ if (pci_is_pcie(bridge)) {
dma_pdev = pci_get_domain_bus_and_slot(
pci_domain_nr(pdev->bus),
bridge->subordinate->number, 0);
- else
+ if (!dma_pdev) {
+ printk("MTHODE: debugging\n");
+ printk("domain: %d, bus: %d, bridge->sub %d\n",
+ pci_domain_nr(pdev->bus), pdev->bus,
+ bridge->subordinate->number);
+ dma_pdev = pci_get_domain_bus_and_slot(
+ pci_domain_nr(pdev->bus),
+ bridge->subordinate->number - 1, 0);
+ }
+ } else
dma_pdev = pci_dev_get(bridge);
} else
dma_pdev = pci_dev_get(pdev);
--
-- Matthew Thode (prometheanfire)
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists