| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <50A1FA7C.4010507@nvidia.com>
Date: Tue, 13 Nov 2012 15:45:00 +0800
From: Mark Zhang <markz@...dia.com>
To: Thierry Reding <thierry.reding@...onic-design.de>
CC: Stephen Warren <swarren@...dotorg.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] ARM: tegra: Add Tegra20 host1x support
On 11/09/2012 09:20 PM, Thierry Reding wrote:
> This commit adds the host1x node along with its children to the Tegra20
> DTSI. Furthermore the OF auxiliary data table is updated to have proper
> names assigned to the platform devices instantiated from the device
> tree. Moreover, the clocks required by host1x and the two display
> controllers are initialized and the pll_d frequency table is completed
> with a few entries to support common HDMI and LVDS display modes.
>
> Signed-off-by: Thierry Reding <thierry.reding@...onic-design.de>
> ---
> arch/arm/boot/dts/tegra20.dtsi | 87 +++++++++++++++++++++++++++++++
> arch/arm/mach-tegra/board-dt-tegra20.c | 9 ++++
> arch/arm/mach-tegra/tegra20_clocks_data.c | 23 ++++----
> 3 files changed, 110 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 71a650d..2b4dec9 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -4,6 +4,93 @@
> compatible = "nvidia,tegra20";
> interrupt-parent = <&intc>;
>
> + host1x {
> + compatible = "nvidia,tegra20-host1x", "simple-bus";
> + reg = <0x50000000 0x00024000>;
> + interrupts = <0 65 0x04 /* mpcore syncpt */
> + 0 67 0x04>; /* mpcore general */
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + ranges = <0x54000000 0x54000000 0x04000000>;
> +
> + mpe {
> + compatible = "nvidia,tegra20-mpe";
> + reg = <0x54040000 0x00040000>;
> + interrupts = <0 68 0x04>;
> + };
> +
> + vi {
> + compatible = "nvidia,tegra20-vi";
> + reg = <0x54080000 0x00040000>;
> + interrupts = <0 69 0x04>;
> + };
> +
> + epp {
> + compatible = "nvidia,tegra20-epp";
> + reg = <0x540c0000 0x00040000>;
> + interrupts = <0 70 0x04>;
> + };
> +
> + isp {
> + compatible = "nvidia,tegra20-isp";
> + reg = <0x54100000 0x00040000>;
> + interrupts = <0 71 0x04>;
> + };
> +
> + gr2d {
> + compatible = "nvidia,tegra20-gr2d";
> + reg = <0x54140000 0x00040000>;
> + interrupts = <0 72 0x04>;
> + };
> +
> + gr3d {
> + compatible = "nvidia,tegra20-gr3d";
> + reg = <0x54180000 0x00040000>;
> + };
> +
> + dc@...00000 {
> + compatible = "nvidia,tegra20-dc";
> + reg = <0x54200000 0x00040000>;
> + interrupts = <0 73 0x04>;
> +
> + rgb {
> + status = "disabled";
> + };
> + };
> +
> + dc@...40000 {
> + compatible = "nvidia,tegra20-dc";
> + reg = <0x54240000 0x00040000>;
> + interrupts = <0 74 0x04>;
> +
> + rgb {
> + status = "disabled";
> + };
> + };
> +
> + hdmi {
> + compatible = "nvidia,tegra20-hdmi";
> + reg = <0x54280000 0x00040000>;
> + interrupts = <0 75 0x04>;
> + status = "disabled";
> + };
> +
> + tvo {
> + compatible = "nvidia,tegra20-tvo";
> + reg = <0x542c0000 0x00040000>;
> + interrupts = <0 76 0x04>;
> + status = "disabled";
> + };
> +
> + dsi {
> + compatible = "nvidia,tegra20-dsi";
> + reg = <0x54300000 0x00040000>;
> + status = "disabled";
> + };
> + };
> +
> timer@...04600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0x50040600 0x20>;
> diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
> index 22f5a9b..1afbdd1 100644
> --- a/arch/arm/mach-tegra/board-dt-tegra20.c
> +++ b/arch/arm/mach-tegra/board-dt-tegra20.c
> @@ -93,6 +93,12 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
> OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL),
> OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL),
> OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "tegra-host1x", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegra-dc.0", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegra-dc.1", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "tegra-hdmi", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "tegra-dsi", NULL),
> + OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tegra-tvo", NULL),
> {}
> };
>
> @@ -116,6 +122,9 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
> { "sbc2", "pll_p", 100000000, false },
> { "sbc3", "pll_p", 100000000, false },
> { "sbc4", "pll_p", 100000000, false },
> + { "host1x", "pll_c", 144000000, false },
> + { "disp1", "pll_p", 600000000, false },
> + { "disp2", "pll_p", 600000000, false },
I think here the parent of disp2 should be "pll_d_out0", not "pll_p".
Right now pll_p has not a proper clock setting to make 148.5MHz 1080p
HDMI happy. In addition, you add the 297MHz in pll_d frequency table
next and I think this is for disp2 has a proper clock rate to support HDMI.
> { NULL, NULL, 0, 0},
> };
>
> diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
> index 9615ee3..2e247f2 100644
> --- a/arch/arm/mach-tegra/tegra20_clocks_data.c
> +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
> @@ -246,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
> { 19200000, 216000000, 135, 12, 1, 3},
> { 26000000, 216000000, 216, 26, 1, 4},
>
> + { 12000000, 297000000, 99, 4, 1, 4 },
> + { 12000000, 339000000, 113, 4, 1, 4 },
> +
> { 12000000, 594000000, 594, 12, 1, 8},
> { 13000000, 594000000, 594, 13, 1, 8},
> { 19200000, 594000000, 495, 16, 1, 8},
> { 26000000, 594000000, 594, 26, 1, 8},
>
> + { 12000000, 616000000, 616, 12, 1, 8},
> +
> { 12000000, 1000000000, 1000, 12, 1, 12},
> { 13000000, 1000000000, 1000, 13, 1, 12},
> { 19200000, 1000000000, 625, 12, 1, 8},
> @@ -930,17 +935,17 @@ PERIPH_CLK(vi, "tegra_camera", "vi", 20, 0x148, 150000000, mux_pllm_pllc_pllp_
> PERIPH_CLK(vi_sensor, "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET); /* scales with voltage and process_id */
> PERIPH_CLK(epp, "epp", NULL, 19, 0x16c, 300000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
> PERIPH_CLK(mpe, "mpe", NULL, 60, 0x170, 250000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
> -PERIPH_CLK(host1x, "host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
> +PERIPH_CLK(host1x, "tegra-host1x", NULL, 28, 0x180, 166000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71); /* scales with voltage and process_id */
> PERIPH_CLK(cve, "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> -PERIPH_CLK(tvo, "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> -PERIPH_CLK(hdmi, "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> +PERIPH_CLK(tvo, "tegra-tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> +PERIPH_CLK(hdmi, "tegra-hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> PERIPH_CLK(tvdac, "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71); /* requires min voltage */
> -PERIPH_CLK(disp1, "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
> -PERIPH_CLK(disp2, "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
> +PERIPH_CLK(disp1, "tegra-dc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
> +PERIPH_CLK(disp2, "tegra-dc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX); /* scales with voltage and process_id */
> PERIPH_CLK(usbd, "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
> PERIPH_CLK(usb2, "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
> PERIPH_CLK(usb3, "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0); /* requires min voltage */
> -PERIPH_CLK(dsi, "dsi", NULL, 48, 0, 500000000, mux_plld, 0); /* scales with voltage */
> +PERIPH_CLK(dsi, "tegra-dsi", NULL, 48, 0, 500000000, mux_plld, 0); /* scales with voltage */
> PERIPH_CLK(csi, "tegra_camera", "csi", 52, 0, 72000000, mux_pllp_out3, 0);
> PERIPH_CLK(isp, "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0); /* same frequency as VI */
> PERIPH_CLK(csus, "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET);
> @@ -1036,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
> CLK_DUPLICATE("usbd", "utmip-pad", NULL),
> CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
> CLK_DUPLICATE("usbd", "tegra-otg", NULL),
> - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
> - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
> - CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"),
> CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"),
> CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"),
> CLK_DUPLICATE("epp", "tegra_grhost", "epp"),
> @@ -1051,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = {
> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"),
> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"),
> CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"),
> + CLK_DUPLICATE("pll_p", "tegra-dc.0", "parent"),
> + CLK_DUPLICATE("pll_p", "tegra-dc.1", "parent"),
> + CLK_DUPLICATE("pll_d_out0", "tegra-hdmi", "parent"),
> };
The same with my above comments, the tegra-dc.1's parent should be
pll_d_out0.
>
> #define CLK(dev, con, ck) \
> --
> 1.8.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists