[ 0.000000] Linux version 3.7.0-rc5 (kbuild@inn) (gcc version 4.7.1 (Debian 4.7.1-6) ) #1 Tue Nov 13 07:08:00 CST 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init. [ 0.000000] CPU: Your system may be unstable. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000093c00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x70406, new 0x7010600070106 [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [b008f000] 8f000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x0fffdfff] [ 0.000000] [mem 0x00000000-0x0fffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0xfffdfff @ [mem 0x027bd000-0x027fffff] [ 0.000000] cma: dma_contiguous_reserve(limit 00000000) [ 0.000000] cma: dma_contiguous_reserve: reserving 25 MiB for global area [ 0.000000] cma: dma_declare_contiguous(size 198c000, base 00000000, limit 00000000) [ 0.000000] cma: CMA: reserved 28 MiB at 0c800000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 128324(97%) [ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff] [ 0.000000] ACPI: RSDP 000fd930 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0fffe550 00038 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0fffe590 01121 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0fffff40 00040 [ 0.000000] ACPI: SSDT 0ffffe40 000FF (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0ffffd50 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0ffffd10 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: SSDT 0ffff6c0 00644 (v01 BXPC BXSSDTPC 00000001 INTL 20100528) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fffe000 [ 0.000000] low ram: 0 - 0fffe000 [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1c12a81, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x0fffdfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x00092fff] [ 0.000000] node 0: [mem 0x00100000-0x0fffdfff] [ 0.000000] On node 0 totalpages: 65409 [ 0.000000] free_area_init_node: node 0, pgdat b1c846e0, node_mem_map be4bf280 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3931 pages, LIFO batch:0 [ 0.000000] Normal zone: 600 pages used for memmap [ 0.000000] Normal zone: 60838 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1c12a00 [ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64769 [ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 branch=linus/master log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=vmlinuz-2012-11-13-07-09-02-linus:master:77b6706-77b6706-i386-randconfig-n015-3-bens BOOT_IMAGE=kernel-tests/kernels/i386-randconfig-n015/77b6706/vmlinuz-3.7.0-rc5 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 174968k/262136k available (8167k kernel code, 86668k reserved, 6893k data, 608k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffcd000 - 0xfffff000 ( 200 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc07fe000 - 0xff7fe000 (1008 MB) [ 0.000000] lowmem : 0xb0000000 - 0xbfffe000 ( 255 MB) [ 0.000000] .init : 0xb1eb6000 - 0xb1f4e000 ( 608 kB) [ 0.000000] .data : 0xb17f9c06 - 0xb1eb52c0 (6893 kB) [ 0.000000] .text : 0xb1000000 - 0xb17f9c06 (8167 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=bbc06000 soft=bbc08000 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] ------------------------ [ 0.000000] | Locking API testsuite: [ 0.000000] ---------------------------------------------------------------------------- [ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | [ 0.000000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.000000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] recursive read-lock: | ok | | ok | [ 0.000000] recursive read-lock #2: | ok | | ok | [ 0.000000] mixed read-write-lock: | ok | | ok | [ 0.000000] mixed write-read-lock: | ok | | ok | [ 0.000000] -------------------------------------------------------------------------- [ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/123: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/123: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/132: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/132: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/213: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/213: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/231: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/231: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/312: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/312: ok | ok | ok | [ 0.000000] hard-irq lock-inversion/321: ok | ok | ok | [ 0.000000] soft-irq lock-inversion/321: ok | ok | ok | [ 0.000000] hard-irq read-recursion/123: ok | [ 0.000000] soft-irq read-recursion/123: ok | [ 0.000000] hard-irq read-recursion/132: ok | [ 0.000000] soft-irq read-recursion/132: ok | [ 0.000000] hard-irq read-recursion/213: ok | [ 0.000000] soft-irq read-recursion/213: ok | [ 0.000000] hard-irq read-recursion/231: ok | [ 0.000000] soft-irq read-recursion/231: ok | [ 0.000000] hard-irq read-recursion/312: ok | [ 0.000000] soft-irq read-recursion/312: ok | [ 0.000000] hard-irq read-recursion/321: ok | [ 0.000000] soft-irq read-recursion/321: ok | [ 0.000000] ------------------------------------------------------- [ 0.000000] Good, all 218 testcases passed! | [ 0.000000] --------------------------------- [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 2666.448 MHz processor [ 0.003000] Calibrating delay loop (skipped) preset value.. 5332.89 BogoMIPS (lpj=2666448) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.005254] Mount-cache hash table entries: 512 [ 0.007237] mce: CPU supports 10 MCE banks [ 0.008010] mce: unknown CPU type - not enabling MCE support [ 0.009047] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.009047] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.009047] tlb_flushall_shift: -1 [ 0.010008] CPU: GenuineIntel Common KVM processor (fam: 0f, model: 06, stepping: 01) [ 0.017497] ACPI: Core revision 20120913 [ 0.020716] ACPI: setting ELCR to 0200 (from 0c00) [ 0.021051] ftrace: allocating 24522 entries in 48 pages [ 0.032253] Performance Events: [ 0.033878] Testing tracer nop: PASSED [ 0.037286] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.038189] device: 'platform': device_add [ 0.039043] PM: Adding info for No Bus:platform [ 0.040076] bus: 'platform': registered [ 0.041026] bus: 'cpu': registered [ 0.041602] device: 'cpu': device_add [ 0.042037] PM: Adding info for No Bus:cpu [ 0.044605] bus: 'virtio': registered [ 0.045010] cma: cma_init_reserved_areas() [ 0.046009] cma: cma_create_area(base 0000c800, count 1c00) [ 0.047664] cma: cma_create_area: returned bbc00d50 [ 0.048352] NET: Registered protocol family 16 [ 0.050329] device class 'bdi': registering [ 0.051143] device class 'pci_bus': registering [ 0.052081] bus: 'pci': registered [ 0.052662] device: 'rapidio': device_add [ 0.053024] PM: Adding info for No Bus:rapidio [ 0.054036] bus: 'rapidio': registered [ 0.054675] device class 'lcd': registering [ 0.055018] device class 'backlight': registering [ 0.056018] device class 'video_output': registering [ 0.057018] device class 'tty': registering [ 0.058115] bus: 'spi': registered [ 0.058696] device class 'spi_master': registering [ 0.059087] bus: 'i2c': registered [ 0.060019] bus: 'i2c': add driver dummy [ 0.061702] ACPI: bus type pci registered [ 0.062010] device class 'dma': registering [ 0.063044] device class 'dmi': registering [ 0.064021] device: 'id': device_add [ 0.064703] PM: Adding info for No Bus:id [ 0.065039] dca service started, version 1.12.1 [ 0.066009] device class 'dca': registering [ 0.067264] PCI: PCI BIOS revision 2.10 entry at 0xfc78c, last bus=0 [ 0.068009] PCI: Using configuration type 1 for base access [ 0.070069] device: 'cpu0': device_add [ 0.070708] bus: 'cpu': add device cpu0 [ 0.071026] PM: Adding info for cpu:cpu0 [ 0.077513] device: 'default': device_add [ 0.078038] PM: Adding info for No Bus:default [ 0.079261] bus: 'i2c': add driver pca953x [ 0.080028] bus: 'platform': add driver stmpe-gpio [ 0.080848] bus: 'i2c': add driver sx150x [ 0.081073] bus: 'platform': add driver tc3589x-gpio [ 0.082025] bus: 'platform': add driver wm8350-gpio [ 0.083063] device class 'graphics': registering [ 0.084020] bus: 'platform': add driver aat2870-backlight [ 0.085046] ACPI: Added _OSI(Module Device) [ 0.086010] ACPI: Added _OSI(Processor Device) [ 0.086756] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.087010] ACPI: Added _OSI(Processor Aggregator Device) [ 0.090806] ACPI: EC: Look up EC in DSDT [ 0.097196] ACPI: Interpreter enabled [ 0.097825] ACPI: (supports S0 S3 S5) [ 0.098256] ACPI: Using PIC for interrupt routing [ 0.099048] bus: 'acpi': registered [ 0.100011] bus: 'acpi': add driver power [ 0.101015] device: 'LNXSYSTM:00': device_add [ 0.101756] bus: 'acpi': add device LNXSYSTM:00 [ 0.102075] PM: Adding info for acpi:LNXSYSTM:00 [ 0.103143] device: 'device:00': device_add [ 0.104061] bus: 'acpi': add device device:00 [ 0.105024] PM: Adding info for acpi:device:00 [ 0.106082] device: 'PNP0A03:00': device_add [ 0.106806] bus: 'acpi': add device PNP0A03:00 [ 0.107023] PM: Adding info for acpi:PNP0A03:00 [ 0.109166] device: 'device:01': device_add [ 0.109878] bus: 'acpi': add device device:01 [ 0.110025] PM: Adding info for acpi:device:01 [ 0.111096] device: 'device:02': device_add [ 0.112016] bus: 'acpi': add device device:02 [ 0.113024] PM: Adding info for acpi:device:02 [ 0.114043] device: 'PNP0B00:00': device_add [ 0.114779] bus: 'acpi': add device PNP0B00:00 [ 0.115092] PM: Adding info for acpi:PNP0B00:00 [ 0.116138] device: 'PNP0303:00': device_add [ 0.117017] bus: 'acpi': add device PNP0303:00 [ 0.118025] PM: Adding info for acpi:PNP0303:00 [ 0.119202] device: 'PNP0F13:00': device_add [ 0.120019] bus: 'acpi': add device PNP0F13:00 [ 0.120780] PM: Adding info for acpi:PNP0F13:00 [ 0.121113] device: 'PNP0700:00': device_add [ 0.122014] bus: 'acpi': add device PNP0700:00 [ 0.123023] PM: Adding info for acpi:PNP0700:00 [ 0.124226] device: 'PNP0400:00': device_add [ 0.125015] bus: 'acpi': add device PNP0400:00 [ 0.125830] PM: Adding info for acpi:PNP0400:00 [ 0.126198] device: 'PNP0501:00': device_add [ 0.127015] bus: 'acpi': add device PNP0501:00 [ 0.128025] PM: Adding info for acpi:PNP0501:00 [ 0.129140] device: 'device:03': device_add [ 0.130016] bus: 'acpi': add device device:03 [ 0.131024] PM: Adding info for acpi:device:03 [ 0.131868] device: 'device:04': device_add [ 0.132016] bus: 'acpi': add device device:04 [ 0.133024] PM: Adding info for acpi:device:04 [ 0.134088] device: 'device:05': device_add [ 0.135015] bus: 'acpi': add device device:05 [ 0.136009] PM: Adding info for acpi:device:05 [ 0.136847] device: 'device:06': device_add [ 0.137016] bus: 'acpi': add device device:06 [ 0.138025] PM: Adding info for acpi:device:06 [ 0.139171] device: 'device:07': device_add [ 0.140018] bus: 'acpi': add device device:07 [ 0.140790] PM: Adding info for acpi:device:07 [ 0.141105] device: 'device:08': device_add [ 0.142014] bus: 'acpi': add device device:08 [ 0.143023] PM: Adding info for acpi:device:08 [ 0.144090] device: 'device:09': device_add [ 0.144800] bus: 'acpi': add device device:09 [ 0.145023] PM: Adding info for acpi:device:09 [ 0.146092] device: 'device:0a': device_add [ 0.147071] bus: 'acpi': add device device:0a [ 0.148026] PM: Adding info for acpi:device:0a [ 0.149096] device: 'device:0b': device_add [ 0.149808] bus: 'acpi': add device device:0b [ 0.150035] PM: Adding info for acpi:device:0b [ 0.151091] device: 'device:0c': device_add [ 0.152016] bus: 'acpi': add device device:0c [ 0.153027] PM: Adding info for acpi:device:0c [ 0.154010] device: 'device:0d': device_add [ 0.154726] bus: 'acpi': add device device:0d [ 0.155025] PM: Adding info for acpi:device:0d [ 0.156097] device: 'device:0e': device_add [ 0.157015] bus: 'acpi': add device device:0e [ 0.158033] PM: Adding info for acpi:device:0e [ 0.158945] device: 'device:0f': device_add [ 0.159018] bus: 'acpi': add device device:0f [ 0.160025] PM: Adding info for acpi:device:0f [ 0.161096] device: 'device:10': device_add [ 0.162016] bus: 'acpi': add device device:10 [ 0.162764] PM: Adding info for acpi:device:10 [ 0.163103] device: 'device:11': device_add [ 0.164015] bus: 'acpi': add device device:11 [ 0.165024] PM: Adding info for acpi:device:11 [ 0.166091] device: 'device:12': device_add [ 0.167014] bus: 'acpi': add device device:12 [ 0.167825] PM: Adding info for acpi:device:12 [ 0.168098] device: 'device:13': device_add [ 0.169015] bus: 'acpi': add device device:13 [ 0.170024] PM: Adding info for acpi:device:13 [ 0.171091] device: 'device:14': device_add [ 0.171805] bus: 'acpi': add device device:14 [ 0.172024] PM: Adding info for acpi:device:14 [ 0.173091] device: 'device:15': device_add [ 0.174014] bus: 'acpi': add device device:15 [ 0.175023] PM: Adding info for acpi:device:15 [ 0.175847] device: 'device:16': device_add [ 0.176014] bus: 'acpi': add device device:16 [ 0.177080] PM: Adding info for acpi:device:16 [ 0.178167] device: 'device:17': device_add [ 0.179017] bus: 'acpi': add device device:17 [ 0.180024] PM: Adding info for acpi:device:17 [ 0.181128] device: 'device:18': device_add [ 0.182018] bus: 'acpi': add device device:18 [ 0.183026] PM: Adding info for acpi:device:18 [ 0.184051] device: 'device:19': device_add [ 0.184758] bus: 'acpi': add device device:19 [ 0.185025] PM: Adding info for acpi:device:19 [ 0.186092] device: 'device:1a': device_add [ 0.187015] bus: 'acpi': add device device:1a [ 0.188014] PM: Adding info for acpi:device:1a [ 0.188844] device: 'device:1b': device_add [ 0.189083] bus: 'acpi': add device device:1b [ 0.190026] PM: Adding info for acpi:device:1b [ 0.191109] device: 'device:1c': device_add [ 0.191853] bus: 'acpi': add device device:1c [ 0.192027] PM: Adding info for acpi:device:1c [ 0.193093] device: 'device:1d': device_add [ 0.194015] bus: 'acpi': add device device:1d [ 0.195038] PM: Adding info for acpi:device:1d [ 0.196110] device: 'device:1e': device_add [ 0.196828] bus: 'acpi': add device device:1e [ 0.197024] PM: Adding info for acpi:device:1e [ 0.198182] device: 'device:1f': device_add [ 0.199017] bus: 'acpi': add device device:1f [ 0.200081] PM: Adding info for acpi:device:1f [ 0.201097] device: 'device:20': device_add [ 0.201813] bus: 'acpi': add device device:20 [ 0.202025] PM: Adding info for acpi:device:20 [ 0.203092] device: 'device:21': device_add [ 0.204014] bus: 'acpi': add device device:21 [ 0.205023] PM: Adding info for acpi:device:21 [ 0.205847] device: 'device:22': device_add [ 0.206014] bus: 'acpi': add device device:22 [ 0.207024] PM: Adding info for acpi:device:22 [ 0.208352] device: 'PNP0103:00': device_add [ 0.209033] bus: 'acpi': add device PNP0103:00 [ 0.210100] PM: Adding info for acpi:PNP0103:00 [ 0.211287] device: 'PNP0C0F:00': device_add [ 0.212017] bus: 'acpi': add device PNP0C0F:00 [ 0.213025] PM: Adding info for acpi:PNP0C0F:00 [ 0.214197] device: 'PNP0C0F:01': device_add [ 0.215015] bus: 'acpi': add device PNP0C0F:01 [ 0.215778] PM: Adding info for acpi:PNP0C0F:01 [ 0.216199] device: 'PNP0C0F:02': device_add [ 0.217015] bus: 'acpi': add device PNP0C0F:02 [ 0.218025] PM: Adding info for acpi:PNP0C0F:02 [ 0.219281] device: 'PNP0C0F:03': device_add [ 0.220020] bus: 'acpi': add device PNP0C0F:03 [ 0.221082] PM: Adding info for acpi:PNP0C0F:03 [ 0.222200] device: 'PNP0C0F:04': device_add [ 0.223016] bus: 'acpi': add device PNP0C0F:04 [ 0.223783] PM: Adding info for acpi:PNP0C0F:04 [ 0.224126] device: 'LNXCPU:00': device_add [ 0.225016] bus: 'acpi': add device LNXCPU:00 [ 0.226025] PM: Adding info for acpi:LNXCPU:00 [ 0.227110] device: 'LNXCPU:01': device_add [ 0.227826] bus: 'acpi': add device LNXCPU:01 [ 0.228025] PM: Adding info for acpi:LNXCPU:01 [ 0.229096] device: 'device:23': device_add [ 0.230016] bus: 'acpi': add device device:23 [ 0.231088] PM: Adding info for acpi:device:23 [ 0.232056] device: 'LNXPWRBN:00': device_add [ 0.232794] bus: 'acpi': add device LNXPWRBN:00 [ 0.233024] PM: Adding info for acpi:LNXPWRBN:00 [ 0.234341] bus: 'acpi': add driver ec [ 0.235219] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.236011] bus: 'acpi': add driver pci_root [ 0.237018] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root [ 0.238015] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00 [ 0.240052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.241053] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.242011] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.243011] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.244011] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored) [ 0.245012] PCI: root bus 00: using default resources [ 0.246039] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.247024] device: 'pci0000:00': device_add [ 0.248087] PM: Adding info for No Bus:pci0000:00 [ 0.249024] device: '0000:00': device_add [ 0.250046] PM: Adding info for No Bus:0000:00 [ 0.250843] PCI host bridge to bus 0000:00 [ 0.251020] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.252011] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.253010] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.254029] pci_bus 0000:00: scanning bus [ 0.255097] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.256071] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x9 [ 0.258433] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.260296] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.263392] pci 0000:00:01.1: reg 20: [io 0xc1c0-0xc1cf] [ 0.265376] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.266030] pci 0000:00:01.3: calling acpi_pm_check_blacklist+0x0/0x65 [ 0.268260] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x162 [ 0.269028] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.270025] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.271074] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0xf [ 0.273139] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.276080] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.278555] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.285107] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.286269] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.288365] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 0.290376] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.294684] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.295184] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.297012] pci 0000:00:04.0: reg 10: [io 0xc040-0xc07f] [ 0.298696] pci 0000:00:04.0: reg 14: [mem 0xfebf1000-0xfebf1fff] [ 0.303689] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000 [ 0.305367] pci 0000:00:05.0: reg 10: [io 0xc080-0xc0bf] [ 0.307332] pci 0000:00:05.0: reg 14: [mem 0xfebf2000-0xfebf2fff] [ 0.312320] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 [ 0.314011] pci 0000:00:06.0: reg 10: [io 0xc0c0-0xc0ff] [ 0.315695] pci 0000:00:06.0: reg 14: [mem 0xfebf3000-0xfebf3fff] [ 0.320688] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 [ 0.322749] pci 0000:00:07.0: reg 10: [io 0xc100-0xc13f] [ 0.324368] pci 0000:00:07.0: reg 14: [mem 0xfebf4000-0xfebf4fff] [ 0.329460] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 [ 0.331371] pci 0000:00:08.0: reg 10: [io 0xc140-0xc17f] [ 0.333011] pci 0000:00:08.0: reg 14: [mem 0xfebf5000-0xfebf5fff] [ 0.338214] pci 0000:00:09.0: [1af4:1001] type 00 class 0x010000 [ 0.340011] pci 0000:00:09.0: reg 10: [io 0xc180-0xc1bf] [ 0.341687] pci 0000:00:09.0: reg 14: [mem 0xfebf6000-0xfebf6fff] [ 0.346647] pci 0000:00:0a.0: [8086:25ab] type 00 class 0x088000 [ 0.348216] pci 0000:00:0a.0: reg 10: [mem 0xfebf7000-0xfebf700f] [ 0.352111] pci_bus 0000:00: fixups for bus [ 0.352823] pci_bus 0000:00: bus scan returning with max=00 [ 0.353018] pci_bus 0000:00: on NUMA node 0 [ 0.354094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.357252] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.358025] device: '0000:00:00.0': device_add [ 0.360401] bus: 'pci': add device 0000:00:00.0 [ 0.361146] PM: Adding info for pci:0000:00:00.0 [ 0.362084] device: '0000:00:01.0': device_add [ 0.364022] bus: 'pci': add device 0000:00:01.0 [ 0.364882] PM: Adding info for pci:0000:00:01.0 [ 0.365026] device: '0000:00:01.1': device_add [ 0.367463] bus: 'pci': add device 0000:00:01.1 [ 0.368054] PM: Adding info for pci:0000:00:01.1 [ 0.369025] device: '0000:00:01.3': device_add [ 0.370861] bus: 'pci': add device 0000:00:01.3 [ 0.371115] PM: Adding info for pci:0000:00:01.3 [ 0.372026] device: '0000:00:02.0': device_add [ 0.374354] bus: 'pci': add device 0000:00:02.0 [ 0.375105] PM: Adding info for pci:0000:00:02.0 [ 0.376029] device: '0000:00:03.0': device_add [ 0.377821] bus: 'pci': add device 0000:00:03.0 [ 0.378054] PM: Adding info for pci:0000:00:03.0 [ 0.379032] device: '0000:00:04.0': device_add [ 0.381270] bus: 'pci': add device 0000:00:04.0 [ 0.382115] PM: Adding info for pci:0000:00:04.0 [ 0.383031] device: '0000:00:05.0': device_add [ 0.384783] bus: 'pci': add device 0000:00:05.0 [ 0.385054] PM: Adding info for pci:0000:00:05.0 [ 0.386024] device: '0000:00:06.0': device_add [ 0.388220] bus: 'pci': add device 0000:00:06.0 [ 0.389113] PM: Adding info for pci:0000:00:06.0 [ 0.389905] device: '0000:00:07.0': device_add [ 0.391683] bus: 'pci': add device 0000:00:07.0 [ 0.392109] PM: Adding info for pci:0000:00:07.0 [ 0.393027] device: '0000:00:08.0': device_add [ 0.395179] bus: 'pci': add device 0000:00:08.0 [ 0.396040] PM: Adding info for pci:0000:00:08.0 [ 0.396828] device: '0000:00:09.0': device_add [ 0.398554] bus: 'pci': add device 0000:00:09.0 [ 0.399107] PM: Adding info for pci:0000:00:09.0 [ 0.400025] device: '0000:00:0a.0': device_add [ 0.402060] bus: 'pci': add device 0000:00:0a.0 [ 0.402865] PM: Adding info for pci:0000:00:0a.0 [ 0.403027] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root' [ 0.404043] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root [ 0.405089] bus: 'acpi': add driver pci_link [ 0.406041] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link [ 0.407011] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00 [ 0.409125] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.410329] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link' [ 0.411012] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link [ 0.412014] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link [ 0.413010] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01 [ 0.414093] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.415373] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link' [ 0.416011] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link [ 0.417013] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link [ 0.418010] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02 [ 0.419098] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.420371] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link' [ 0.421011] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link [ 0.422014] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link [ 0.423011] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03 [ 0.424198] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.426172] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link' [ 0.427014] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link [ 0.428015] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link [ 0.429010] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04 [ 0.430098] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0 [ 0.431288] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link' [ 0.432012] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link [ 0.433061] bus: 'pnp': registered [ 0.433666] device class 'misc': registering [ 0.434070] device: 'vga_arbiter': device_add [ 0.435088] PM: Adding info for No Bus:vga_arbiter [ 0.436106] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.437017] vgaarb: loaded [ 0.438008] vgaarb: bridge control possible 0000:00:02.0 [ 0.439265] bus: 'tifm': registered [ 0.440009] device class 'tifm_adapter': registering [ 0.441045] bus: 'i2c': add driver 88PM80X [ 0.441756] Error: Driver '88PM80X' is already registered, aborting... [ 0.442030] bus: 'spi': add driver stmpe-spi [ 0.442761] bus: 'i2c': add driver tc3589x [ 0.443042] bus: 'i2c': add driver wm8350 [ 0.444024] bus: 'i2c': add driver tps65217 [ 0.445085] bus: 'spi': add driver da9052 [ 0.445778] bus: 'i2c': add driver da9052 [ 0.446026] bus: 'i2c': add driver max8907 [ 0.447025] bus: 'i2c': add driver max8925 [ 0.448027] bus: 'i2c': add driver max8997 [ 0.448790] bus: 'i2c': add driver ab3100 [ 0.449026] bus: 'i2c': add driver aat2870 [ 0.450025] bus: 'i2c': add driver sec_pmic [ 0.451032] bus: 'i2c': add driver lm3533 [ 0.451736] bus: 'platform': add driver pxa2xx-spi [ 0.452026] device class 'pcmcia_socket': registering [ 0.453211] ACPI: bus type usb registered [ 0.454030] bus: 'usb': registered [ 0.455045] bus: 'usb': add driver usbfs [ 0.456020] usbcore: registered new interface driver usbfs [ 0.456948] bus: 'usb': add driver hub [ 0.457025] usbcore: registered new interface driver hub [ 0.458121] bus: 'usb': add driver usb [ 0.459025] usbcore: registered new device driver usb [ 0.460086] bus: 'serio': registered [ 0.461016] device class 'input': registering [ 0.461775] device class 'rtc': registering [ 0.462054] device class 'pps': registering [ 0.463020] pps_core: LinuxPPS API ver. 1 registered [ 0.464009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.465015] device class 'ptp': registering [ 0.466019] PTP clock support registered [ 0.467009] device class 'power_supply': registering [ 0.468041] device class 'hwmon': registering [ 0.469042] device class 'leds': registering [ 0.469792] device class 'wmi': registering [ 0.470024] bus: 'acpi': add driver wmi [ 0.471058] wmi: Mapper loaded [ 0.471605] PCI: Using ACPI for IRQ routing [ 0.472023] PCI: pci_cache_line_size set to 64 bytes [ 0.473074] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.474016] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.475012] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.476012] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.477011] pci 0000:00:01.1: BAR 4: reserving [io 0xc1c0-0xc1cf flags 0x40101] (d=0, p=0) [ 0.478043] pci 0000:00:02.0: BAR 0: reserving [mem 0xfc000000-0xfdffffff flags 0x42208] (d=0, p=0) [ 0.479013] pci 0000:00:02.0: BAR 1: reserving [mem 0xfebf0000-0xfebf0fff flags 0x40200] (d=0, p=0) [ 0.480029] pci 0000:00:03.0: BAR 0: reserving [mem 0xfeba0000-0xfebbffff flags 0x40200] (d=0, p=0) [ 0.481012] pci 0000:00:03.0: BAR 1: reserving [io 0xc000-0xc03f flags 0x40101] (d=0, p=0) [ 0.482029] pci 0000:00:04.0: BAR 0: reserving [io 0xc040-0xc07f flags 0x40101] (d=0, p=0) [ 0.483013] pci 0000:00:04.0: BAR 1: reserving [mem 0xfebf1000-0xfebf1fff flags 0x40200] (d=0, p=0) [ 0.484030] pci 0000:00:05.0: BAR 0: reserving [io 0xc080-0xc0bf flags 0x40101] (d=0, p=0) [ 0.485012] pci 0000:00:05.0: BAR 1: reserving [mem 0xfebf2000-0xfebf2fff flags 0x40200] (d=0, p=0) [ 0.486031] pci 0000:00:06.0: BAR 0: reserving [io 0xc0c0-0xc0ff flags 0x40101] (d=0, p=0) [ 0.487014] pci 0000:00:06.0: BAR 1: reserving [mem 0xfebf3000-0xfebf3fff flags 0x40200] (d=0, p=0) [ 0.488030] pci 0000:00:07.0: BAR 0: reserving [io 0xc100-0xc13f flags 0x40101] (d=0, p=0) [ 0.489013] pci 0000:00:07.0: BAR 1: reserving [mem 0xfebf4000-0xfebf4fff flags 0x40200] (d=0, p=0) [ 0.490029] pci 0000:00:08.0: BAR 0: reserving [io 0xc140-0xc17f flags 0x40101] (d=0, p=0) [ 0.491012] pci 0000:00:08.0: BAR 1: reserving [mem 0xfebf5000-0xfebf5fff flags 0x40200] (d=0, p=0) [ 0.492029] pci 0000:00:09.0: BAR 0: reserving [io 0xc180-0xc1bf flags 0x40101] (d=0, p=0) [ 0.493012] pci 0000:00:09.0: BAR 1: reserving [mem 0xfebf6000-0xfebf6fff flags 0x40200] (d=0, p=0) [ 0.494036] pci 0000:00:0a.0: BAR 0: reserving [mem 0xfebf7000-0xfebf700f flags 0x40200] (d=0, p=0) [ 0.495207] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff] [ 0.496020] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff] [ 0.497069] device class 'net': registering [ 0.498271] device: 'lo': device_add [ 0.499250] PM: Adding info for No Bus:lo [ 0.500243] irda_init() [ 0.501088] NET: Registered protocol family 23 [ 0.501874] Bluetooth: Core ver 2.16 [ 0.502038] device class 'bluetooth': registering [ 0.503032] NET: Registered protocol family 31 [ 0.504008] Bluetooth: HCI device and connection manager initialized [ 0.505032] Bluetooth: HCI socket layer initialized [ 0.506014] Bluetooth: L2CAP socket layer initialized [ 0.507065] Bluetooth: SCO socket layer initialized [ 0.508010] device class 'rfkill': registering [ 0.508782] device: 'rfkill': device_add [ 0.509106] PM: Adding info for No Bus:rfkill [ 0.511283] Switching to clocksource kvm-clock [ 0.512675] Warning: could not register all branches stats [ 0.513655] Warning: could not register annotated branches stats [ 0.527161] FS-Cache: Loaded [ 0.527842] bus: 'pnp': add driver system [ 0.528593] pnp: PnP ACPI init [ 0.529195] device: 'pnp0': device_add [ 0.529855] PM: Adding info for No Bus:pnp0 [ 0.530617] ACPI: bus type pnp registered [ 0.531453] pnp 00:00: [bus 00-ff] [ 0.532092] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.532786] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.533617] pnp 00:00: [io 0x0d00-0xffff window] [ 0.534450] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.535395] pnp 00:00: [mem 0xe0000000-0xfebfffff window] [ 0.536347] device: '00:00': device_add [ 0.537089] bus: 'pnp': add device 00:00 [ 0.537774] PM: Adding info for pnp:00:00 [ 0.538539] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.539718] pnp 00:01: [io 0x0070-0x0071] [ 0.540458] pnp 00:01: [irq 8] [ 0.541038] pnp 00:01: [io 0x0072-0x0077] [ 0.541740] device: '00:01': device_add [ 0.542451] bus: 'pnp': add device 00:01 [ 0.543189] PM: Adding info for pnp:00:01 [ 0.543931] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.545249] pnp 00:02: [io 0x0060] [ 0.545851] pnp 00:02: [io 0x0064] [ 0.546486] pnp 00:02: [irq 1] [ 0.547067] device: '00:02': device_add [ 0.547794] bus: 'pnp': add device 00:02 [ 0.548522] PM: Adding info for pnp:00:02 [ 0.549257] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.550437] pnp 00:03: [irq 12] [ 0.551032] device: '00:03': device_add [ 0.551697] bus: 'pnp': add device 00:03 [ 0.552421] PM: Adding info for pnp:00:03 [ 0.553156] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.554330] pnp 00:04: [io 0x03f2-0x03f5] [ 0.555073] pnp 00:04: [io 0x03f7] [ 0.555661] pnp 00:04: [irq 6] [ 0.556234] pnp 00:04: [dma 2] [ 0.556766] device: '00:04': device_add [ 0.557473] bus: 'pnp': add device 00:04 [ 0.558215] PM: Adding info for pnp:00:04 [ 0.558952] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.560189] pnp 00:05: [io 0x0378-0x037f] [ 0.560940] pnp 00:05: [irq 7] [ 0.561463] device: '00:05': device_add [ 0.562178] bus: 'pnp': add device 00:05 [ 0.562977] PM: Adding info for pnp:00:05 [ 0.563669] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.564976] pnp 00:06: [io 0x03f8-0x03ff] [ 0.565673] pnp 00:06: [irq 4] [ 0.566261] device: '00:06': device_add [ 0.566994] bus: 'pnp': add device 00:06 [ 0.567686] PM: Adding info for pnp:00:06 [ 0.568430] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.569966] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.570779] device: '00:07': device_add [ 0.571506] bus: 'pnp': add device 00:07 [ 0.572239] PM: Adding info for pnp:00:07 [ 0.572980] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.574372] pnp: PnP ACPI: found 8 devices [ 0.575111] ACPI: ACPI bus type pnp unregistered [ 0.575944] device class 'mem': registering [ 0.576660] device: 'mem': device_add [ 0.577437] PM: Adding info for No Bus:mem [ 0.578236] device: 'kmem': device_add [ 0.578987] PM: Adding info for No Bus:kmem [ 0.579704] device: 'null': device_add [ 0.580410] PM: Adding info for No Bus:null [ 0.581242] device: 'port': device_add [ 0.581959] PM: Adding info for No Bus:port [ 0.582671] device: 'zero': device_add [ 0.583381] PM: Adding info for No Bus:zero [ 0.584151] device: 'full': device_add [ 0.584928] PM: Adding info for No Bus:full [ 0.585637] device: 'random': device_add [ 0.586500] PM: Adding info for No Bus:random [ 0.587303] device: 'urandom': device_add [ 0.588054] PM: Adding info for No Bus:urandom [ 0.588813] device: 'kmsg': device_add [ 0.589511] PM: Adding info for No Bus:kmsg [ 0.590273] device: 'oldmem': device_add [ 0.591074] PM: Adding info for No Bus:oldmem [ 0.591826] device: 'tty': device_add [ 0.592521] PM: Adding info for No Bus:tty [ 0.593375] device: 'console': device_add [ 0.594137] PM: Adding info for No Bus:console [ 0.594957] device class 'firmware': registering [ 0.595769] bus: 'pcmcia': registered [ 0.596456] device class 'thermal': registering [ 0.632093] bus: 'ssb': registered [ 0.632776] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.633757] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.634865] NET: Registered protocol family 1 [ 0.635702] pci 0000:00:00.0: calling quirk_natoma+0x0/0x45 [ 0.636666] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.637717] pci 0000:00:00.0: calling quirk_passive_release+0x0/0x91 [ 0.638838] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.639902] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x43 [ 0.640975] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.642078] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xfb [ 0.643114] pci 0000:00:02.0: Boot video device [ 0.643946] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x1c5 [ 0.645161] PCI: CLS 0 bytes, default 64 [ 0.646248] Unpacking initramfs... [ 4.141699] debug: unmapping init [mem 0xbe73f000-0xbffeffff] [ 4.145342] device class 'msr': registering [ 4.148148] device: 'msr0': device_add [ 4.149002] PM: Adding info for No Bus:msr0 [ 4.154911] cryptomgr_test (15) used greatest stack depth: 7012 bytes left [ 4.159379] cryptomgr_probe (23) used greatest stack depth: 6996 bytes left [ 4.174574] cryptomgr_test (22) used greatest stack depth: 6344 bytes left [ 4.177302] The force parameter has not been set to 1 so the Iris poweroff handler will not be installed. [ 4.179227] bus: 'clocksource': registered [ 4.179979] device: 'clocksource': device_add [ 4.180732] PM: Adding info for No Bus:clocksource [ 4.182011] device: 'clocksource0': device_add [ 4.182768] bus: 'clocksource': add device clocksource0 [ 4.183700] PM: Adding info for clocksource:clocksource0 [ 4.184686] bus: 'platform': add driver alarmtimer [ 4.185617] Registering platform device 'alarmtimer'. Parent at platform [ 4.186971] device: 'alarmtimer': device_add [ 4.187698] bus: 'platform': add device alarmtimer [ 4.188721] PM: Adding info for platform:alarmtimer [ 4.189737] bus: 'platform': driver_probe_device: matched device alarmtimer with driver alarmtimer [ 4.191272] bus: 'platform': really_probe: probing driver alarmtimer with device alarmtimer [ 4.192706] driver: 'alarmtimer': driver_bound: bound to device 'alarmtimer' [ 4.194098] bus: 'platform': really_probe: bound device alarmtimer to driver alarmtimer [ 4.195624] rcu-torture:--- Start of test: nreaders=2 nfakewriters=4 stat_interval=60 verbose=0 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 4.202650] Testing tracer function: PASSED [ 4.472777] Testing dynamic ftrace: PASSED [ 4.767975] Testing dynamic ftrace ops #1: (1 0 1 1 0) (1 1 2 1 0) (2 1 3 1 3) (2 2 4 1 82) PASSED [ 4.995083] Testing dynamic ftrace ops #2: (1 0 1 3 0) (1 1 2 170 0) (2 1 3 1 114) (2 2 4 88 201) PASSED [ 5.183765] Testing ftrace recursion: PASSED [ 5.201786] Testing ftrace recursion safe: PASSED [ 5.220784] Testing ftrace regs: PASSED [ 5.239060] Testing tracer wakeup: [ 5.301023] tsc: Refined TSC clocksource calibration: 2666.662 MHz PASSED [ 5.402168] Testing tracer wakeup_rt: PASSED [ 5.564422] Testing tracer branch: PASSED [ 5.666480] bus: 'event_source': registered [ 5.667258] device: 'breakpoint': device_add [ 5.668056] bus: 'event_source': add device breakpoint [ 5.669026] PM: Adding info for event_source:breakpoint [ 5.670002] device: 'tracepoint': device_add [ 5.670729] bus: 'event_source': add device tracepoint [ 5.671637] PM: Adding info for event_source:tracepoint [ 5.672560] device: 'software': device_add [ 5.674156] bus: 'event_source': add device software [ 5.675084] PM: Adding info for event_source:software [ 5.676947] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 5.684954] VFS: Disk quotas dquot_6.5.2 [ 5.685820] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 5.688340] alg: No test for cipher_null (cipher_null-generic) [ 5.690580] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 5.692353] alg: No test for compress_null (compress_null-generic) [ 5.693992] alg: No test for digest_null (digest_null-generic) [ 5.723288] alg: No test for stdrng (krng) [ 5.724621] NET: Registered protocol family 38 [ 5.734564] xz_dec_test: module loaded [ 5.735268] xz_dec_test: Create a device node with 'mknod xz_dec_test c 252 0' and write .xz files to it. [ 5.737144] bus: 'platform': add driver basic-mmio-gpio [ 5.738113] bus: 'i2c': add driver adp5588-gpio [ 5.738950] bus: 'platform': add driver da9052-gpio [ 5.739777] bus: 'platform': add driver gpio_ich [ 5.740713] bus: 'pci': add driver langwell_gpio [ 5.741555] bus: 'platform': add driver wp_gpio [ 5.742376] bus: 'pci': add driver ml_ioh_gpio [ 5.743227] bus: 'pci': add driver pch_gpio [ 5.744315] bus: 'platform': add driver rdc321x-gpio [ 5.745212] bus: 'platform': add driver sch_gpio [ 5.746045] bus: 'platform': add driver twl6040-gpo [ 5.747005] bus: 'pci': add driver pci-stub [ 5.747745] bus: 'spi': add driver l4f00242t03 [ 5.748552] bus: 'spi': add driver ltv350qv [ 5.749279] bus: 'spi': add driver VGG2432A4 [ 5.749524] bus: 'spi': add driver ld9040 [ 5.749524] bus: 'platform': add driver generic-bl [ 5.753847] bus: 'i2c': add driver lm3639_bl [ 5.754667] bus: 'platform': add driver cr_backlight [ 5.755596] Registering platform device 'cr_backlight'. Parent at platform [ 5.756793] device: 'cr_backlight': device_add [ 5.757594] bus: 'platform': add device cr_backlight [ 5.758511] PM: Adding info for platform:cr_backlight [ 5.759434] bus: 'platform': driver_probe_device: matched device cr_backlight with driver cr_backlight [ 5.761042] bus: 'platform': really_probe: probing driver cr_backlight with device cr_backlight [ 5.763073] cr_bllcd: INTEL CARILLO RANCH LPC not found. [ 5.764105] cr_backlight: probe of cr_backlight rejects match -19 [ 5.765181] cr_bllcd: Carillo Ranch Backlight Driver Initialized. [ 5.766252] bus: 'platform': add driver da9052-wled [ 5.767757] bus: 'i2c': add driver adp8860_bl [ 5.768555] i2c-core: driver [adp8860_bl] using legacy suspend method [ 5.769665] i2c-core: driver [adp8860_bl] using legacy resume method [ 5.770764] bus: 'i2c': add driver adp8870_bl [ 5.772169] i2c-core: driver [adp8870_bl] using legacy suspend method [ 5.773294] i2c-core: driver [adp8870_bl] using legacy resume method [ 5.774399] bus: 'pci': add driver CyberPro [ 5.775197] bus: 'pci': add driver pm3fb [ 5.775893] bus: 'pci': add driver matroxfb [ 5.777835] nvidiafb_setup START [ 5.778448] bus: 'pci': add driver nvidiafb [ 5.779268] bus: 'pci': add driver radeonfb [ 5.780063] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 5.781234] bus: 'platform': add driver viafb-i2c [ 5.782084] bus: 'platform': add driver viafb-gpio [ 5.782934] bus: 'pci': add driver viafb [ 5.783621] bus: 'pci': add driver savagefb [ 5.785785] bus: 'pci': add driver tdfxfb [ 5.786537] bus: 'pci': add driver vt8623fb [ 5.787309] vmlfb: initializing [ 5.787851] bus: 'pci': add driver vmlfb [ 5.788591] Could not find Carillo Ranch MCH device. [ 5.789468] bus: 'pci': add driver s3fb [ 5.790248] bus: 'pci': add driver arkfb [ 5.790995] bus: 'platform': add driver hecubafb [ 5.791789] no IO addresses supplied [ 5.792459] bus: 'platform': add driver hgafb [ 5.794278] Registering platform device 'hgafb.0'. Parent at platform [ 5.795434] device: 'hgafb.0': device_add [ 5.796182] bus: 'platform': add device hgafb.0 [ 5.796995] PM: Adding info for platform:hgafb.0 [ 5.797800] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb [ 5.799232] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0 [ 5.803260] hgafb: HGA card not detected. [ 5.803957] hgafb: probe of hgafb.0 failed with error -22 [ 5.804093] bus: 'pci': add driver sstfb [ 5.805637] bus: 'platform': add driver broadsheetfb [ 5.806546] bus: 'platform': add driver auo_k1901fb [ 5.807449] bus: 'platform': add driver s1d13xxxfb [ 5.808336] bus: 'usb': add driver udlfb [ 5.809064] usbcore: registered new interface driver udlfb [ 5.810038] bus: 'usb': add driver smscufx [ 5.810790] usbcore: registered new interface driver smscufx [ 5.811775] bus: 'pci': add driver carminefb [ 5.813161] Registering platform device 'vesafb.0'. Parent at platform [ 5.814290] device: 'vesafb.0': device_add [ 5.815031] bus: 'platform': add device vesafb.0 [ 5.815825] PM: Adding info for platform:vesafb.0 [ 5.816672] bus: 'platform': add driver vesafb [ 5.817437] bus: 'platform': driver_probe_device: matched device vesafb.0 with driver vesafb [ 5.818897] bus: 'platform': really_probe: probing driver vesafb with device vesafb.0 [ 5.820259] vesafb: probe of vesafb.0 rejects match -19 [ 5.821235] bus: 'platform': remove driver vesafb [ 5.823019] driver: 'vesafb': driver_release [ 5.823743] PM: Removing info for platform:vesafb.0 [ 5.824721] bus: 'platform': remove device vesafb.0 [ 5.825603] bus: 'acpi': add driver ac [ 5.826381] bus: 'acpi': add driver button [ 5.827814] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button [ 5.829234] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00 [ 5.830571] device: 'input0': device_add [ 5.831337] PM: Adding info for No Bus:input0 [ 5.832172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 5.833450] ACPI: Power Button [PWRF] [ 5.834169] driver: 'LNXPWRBN:00': driver_bound: bound to device 'button' [ 5.836299] bus: 'acpi': really_probe: bound device LNXPWRBN:00 to driver button [ 5.837624] bus: 'acpi': add driver fan [ 5.838364] bus: 'acpi': add driver video [ 5.839128] bus: 'acpi': add driver processor [ 5.839890] bus: 'acpi': driver_probe_device: matched device LNXCPU:00 with driver processor [ 5.841352] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:00 [ 5.842964] device: 'cooling_device0': device_add [ 5.843787] PM: Adding info for No Bus:cooling_device0 [ 5.845580] driver: 'LNXCPU:00': driver_bound: bound to device 'processor' [ 5.846771] bus: 'acpi': really_probe: bound device LNXCPU:00 to driver processor [ 5.848085] bus: 'acpi': driver_probe_device: matched device LNXCPU:01 with driver processor [ 5.849521] bus: 'acpi': really_probe: probing driver processor with device LNXCPU:01 [ 5.851023] driver: 'LNXCPU:01': driver_bound: bound to device 'processor' [ 5.852211] bus: 'acpi': really_probe: bound device LNXCPU:01 to driver processor [ 5.853869] bus: 'acpi': add driver thermal [ 5.854665] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 5.855801] bus: 'pci': add driver ioatdma [ 5.856560] bus: 'platform': add driver timb-dma [ 5.857393] bus: 'platform': add driver virtio-mmio [ 5.858303] bus: 'pci': add driver virtio-pci [ 5.859189] bus: 'acpi': add driver battery [ 5.860058] bus: 'pci': driver_probe_device: matched device 0000:00:04.0 with driver virtio-pci [ 5.861546] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:04.0 [ 5.863359] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 5.865335] PCI: setting IRQ 11 as level-triggered [ 5.867328] virtio-pci 0000:00:04.0: enabling bus mastering [ 5.868335] virtio-pci 0000:00:04.0: setting latency timer to 64 [ 5.869766] device: 'virtio0': device_add [ 5.871643] bus: 'virtio': add device virtio0 [ 5.872455] PM: Adding info for virtio:virtio0 [ 5.873317] driver: '0000:00:04.0': driver_bound: bound to device 'virtio-pci' [ 5.874558] bus: 'pci': really_probe: bound device 0000:00:04.0 to driver virtio-pci [ 5.878289] bus: 'pci': driver_probe_device: matched device 0000:00:05.0 with driver virtio-pci [ 5.879788] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:05.0 [ 5.881574] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 5.882589] PCI: setting IRQ 10 as level-triggered [ 5.883464] virtio-pci 0000:00:05.0: enabling bus mastering [ 5.884469] virtio-pci 0000:00:05.0: setting latency timer to 64 [ 5.885777] device: 'virtio1': device_add [ 5.887078] bus: 'virtio': add device virtio1 [ 5.887845] PM: Adding info for virtio:virtio1 [ 5.888665] driver: '0000:00:05.0': driver_bound: bound to device 'virtio-pci' [ 5.889905] bus: 'pci': really_probe: bound device 0000:00:05.0 to driver virtio-pci [ 5.891238] bus: 'pci': driver_probe_device: matched device 0000:00:06.0 with driver virtio-pci [ 5.892719] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:06.0 [ 5.894499] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 5.895533] virtio-pci 0000:00:06.0: enabling bus mastering [ 5.896526] virtio-pci 0000:00:06.0: setting latency timer to 64 [ 5.897813] device: 'virtio2': device_add [ 5.898835] bus: 'virtio': add device virtio2 [ 5.899690] PM: Adding info for virtio:virtio2 [ 5.900496] driver: '0000:00:06.0': driver_bound: bound to device 'virtio-pci' [ 5.901750] bus: 'pci': really_probe: bound device 0000:00:06.0 to driver virtio-pci [ 5.903095] bus: 'pci': driver_probe_device: matched device 0000:00:07.0 with driver virtio-pci [ 5.904613] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:07.0 [ 5.907313] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 5.908354] virtio-pci 0000:00:07.0: enabling bus mastering [ 5.909356] virtio-pci 0000:00:07.0: setting latency timer to 64 [ 5.910700] device: 'virtio3': device_add [ 5.911444] bus: 'virtio': add device virtio3 [ 5.912264] PM: Adding info for virtio:virtio3 [ 5.913091] driver: '0000:00:07.0': driver_bound: bound to device 'virtio-pci' [ 5.914346] bus: 'pci': really_probe: bound device 0000:00:07.0 to driver virtio-pci [ 5.915683] bus: 'pci': driver_probe_device: matched device 0000:00:08.0 with driver virtio-pci [ 5.917198] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:08.0 [ 5.918759] virtio-pci 0000:00:08.0: enabling bus mastering [ 5.919752] virtio-pci 0000:00:08.0: setting latency timer to 64 [ 5.921093] device: 'virtio4': device_add [ 5.922657] bus: 'virtio': add device virtio4 [ 5.923466] PM: Adding info for virtio:virtio4 [ 5.924268] driver: '0000:00:08.0': driver_bound: bound to device 'virtio-pci' [ 5.925506] bus: 'pci': really_probe: bound device 0000:00:08.0 to driver virtio-pci [ 5.926832] bus: 'pci': driver_probe_device: matched device 0000:00:09.0 with driver virtio-pci [ 5.928321] bus: 'pci': really_probe: probing driver virtio-pci with device 0000:00:09.0 [ 5.929873] virtio-pci 0000:00:09.0: enabling bus mastering [ 5.930867] virtio-pci 0000:00:09.0: setting latency timer to 64 [ 5.932168] device: 'virtio5': device_add [ 5.933082] bus: 'virtio': add device virtio5 [ 5.933881] PM: Adding info for virtio:virtio5 [ 5.934684] driver: '0000:00:09.0': driver_bound: bound to device 'virtio-pci' [ 5.935941] bus: 'pci': really_probe: bound device 0000:00:09.0 to driver virtio-pci [ 5.937287] HDLC line discipline maxframe=4096 [ 5.938107] N_HDLC line discipline registered. [ 5.938972] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 5.940094] bus: 'pnp': add driver serial [ 5.940862] bus: 'pnp': driver_probe_device: matched device 00:06 with driver serial [ 5.942203] bus: 'pnp': really_probe: probing driver serial with device 00:06 [ 5.965971] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.988695] device: 'ttyS0': device_add [ 5.989533] PM: Adding info for No Bus:ttyS0 [ 5.990390] driver: '00:06': driver_bound: bound to device 'serial' [ 5.991488] bus: 'pnp': really_probe: bound device 00:06 to driver serial [ 5.992912] Registering platform device 'serial8250'. Parent at platform [ 5.994077] device: 'serial8250': device_add [ 5.994805] bus: 'platform': add device serial8250 [ 5.995685] PM: Adding info for platform:serial8250 [ 5.996639] device: 'ttyS1': device_add [ 5.997379] PM: Adding info for No Bus:ttyS1 [ 5.998226] device: 'ttyS2': device_add [ 5.998904] PM: Adding info for No Bus:ttyS2 [ 6.002989] device: 'ttyS3': device_add [ 6.003667] PM: Adding info for No Bus:ttyS3 [ 6.004464] bus: 'platform': add driver serial8250 [ 6.005321] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 6.006854] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 6.008802] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 6.010052] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 6.011440] bus: 'spi': add driver max3100 [ 6.012223] bus: 'platform': add driver uartlite [ 6.013565] bus: 'platform': add driver altera_uart [ 6.014524] bus: 'platform': add driver altera_jtaguart [ 6.015470] bus: 'spi': add driver ifx6x60 [ 6.016326] bus: 'pci': add driver isicom [ 6.017083] MOXA Intellio family driver version 6.0k [ 6.017989] bus: 'pci': add driver moxa [ 6.018658] Initializing Nozomi driver 2.1d [ 6.019482] bus: 'pci': add driver nozomi [ 6.020320] RocketPort device driver module, version 2.09, 12-June-2003 [ 6.021528] No rocketport ports found; unloading driver [ 6.022471] SyncLink GT [ 6.022958] SyncLink GT, tty major#248 [ 6.023589] bus: 'pci': add driver synclink_gt [ 6.024396] SyncLink GT no devices found [ 6.025146] toshiba: not a supported Toshiba laptop [ 6.026018] nsc_gpio initializing [ 6.026596] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 6.028217] smapi::smapi_init, ERROR invalid usSmapiID [ 6.029124] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 6.030705] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 6.031969] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 6.033065] device class 'cardman_4000': registering [ 6.033961] bus: 'pcmcia': add driver cm4000_cs [ 6.034746] device class 'drm': registering [ 6.036300] [drm] Initialized drm 1.1.0 20060810 [ 6.037150] device: 'ttm': device_add [ 6.037806] PM: Adding info for No Bus:ttm [ 6.038623] bus: 'pci': add driver mgag200 [ 6.039478] bus: 'pci': add driver vmwgfx [ 6.041457] bus: 'pci': add driver nouveau [ 6.042238] bus: 'i2c': add driver sil164 [ 6.042995] bus: 'pci': add driver ibmasm [ 6.043705] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 6.044860] bus: 'pci': add driver pciPTI [ 6.045601] bus: 'i2c': add driver bmp085 [ 6.046344] bus: 'spi': add driver bmp085 [ 6.047088] bus: 'pci': add driver tifm_7xx1 [ 6.047845] device class 'phantom': registering [ 6.049707] bus: 'pci': add driver phantom [ 6.050503] Phantom Linux Driver, version n0.9.8, init OK [ 6.051453] bus: 'i2c': add driver bh1780 [ 6.052194] bus: 'i2c': add driver bh1770glc [ 6.052989] bus: 'i2c': add driver apds990x [ 6.053710] device class 'iLO': registering [ 6.054474] bus: 'pci': add driver hpilo [ 6.055208] bus: 'i2c': add driver isl29003 [ 6.055979] i2c-core: driver [isl29003] using legacy suspend method [ 6.057077] i2c-core: driver [isl29003] using legacy resume method [ 6.058361] bus: 'i2c': add driver isl29020 [ 6.059159] bus: 'i2c': add driver tsl2550 [ 6.059889] i2c-core: driver [tsl2550] using legacy suspend method [ 6.060983] i2c-core: driver [tsl2550] using legacy resume method [ 6.062051] bus: 'i2c': add driver ds1682 [ 6.062748] bus: 'spi': add driver dac7512 [ 6.063501] bus: 'i2c': add driver hmc6352 [ 6.064255] bus: 'i2c': add driver at24 [ 6.064985] bus: 'i2c': add driver max6875 [ 6.065691] bus: 'spi': add driver 93xx46 [ 6.067134] bus: 'pci': add driver pch_phub [ 6.067909] bus: 'platform': add driver kim [ 6.068666] bus: 'i2c': add driver htcpld-chip [ 6.069478] bus: 'platform': add driver i2c-htcpld [ 6.070352] bus: 'platform': remove driver i2c-htcpld [ 6.071255] driver: 'i2c-htcpld': driver_release [ 6.072085] bus: 'i2c': add driver arizona [ 6.072802] bus: 'i2c': add driver twl6040 [ 6.074109] bus: 'i2c': add driver smsc [ 6.074783] bus: 'platform': add driver ab3100-otp [ 6.075642] bus: 'platform': remove driver ab3100-otp [ 6.076533] driver: 'ab3100-otp': driver_release [ 6.077366] bus: 'pci': add driver timberdale [ 6.078171] Driver for timberdale has been successfully registered. [ 6.079277] bus: 'pci': add driver lpc_sch [ 6.080045] bus: 'pci': add driver lpc_ich [ 6.080805] bus: 'pci': add driver RDC321x Southbridge [ 6.083441] bus: 'pci': add driver janz-cmodio [ 6.084268] bus: 'pci': add driver vx855 [ 6.085015] bus: 'pci': add driver cs5535-mfd [ 6.085779] device class 'mtd': registering [ 6.086542] device: 'mtd-unmap': device_add [ 6.087324] PM: Adding info for No Bus:mtd-unmap [ 6.088188] device: 'mtd-romap': device_add [ 6.088979] PM: Adding info for No Bus:mtd-romap [ 6.089789] device: 'mtd-rwmap': device_add [ 6.091982] PM: Adding info for No Bus:mtd-rwmap [ 6.092881] mtdoops: mtd device (mtddev=name/number) must be supplied [ 6.094033] bus: 'platform': add driver physmap-flash [ 6.094907] physmap-flash.0: failed to claim resource 0 [ 6.097379] bus: 'platform': remove driver physmap-flash [ 6.098336] driver: 'physmap-flash': driver_release [ 6.099200] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 6.100211] ------------[ cut here ]------------ [ 6.101009] Kernel BUG at b144dd6f [verbose debug info unavailable] [ 6.101189] invalid opcode: 0000 [#1] DEBUG_PAGEALLOC [ 6.101189] Pid: 1, comm: swapper Not tainted 3.7.0-rc5 #1 Bochs Bochs [ 6.101189] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 6.101189] EIP is at mtd_do_chip_probe+0xb/0x10 [ 6.101189] EAX: b1c4b71c EBX: b1c4b338 ECX: 00000001 EDX: b1c4b330 [ 6.101189] ESI: b1c4b71c EDI: b1b8f3d9 EBP: bbc2bf3c ESP: bbc2bf00 [ 6.101189] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 6.101189] CR0: 8005003b CR2: 00000000 CR3: 01f51000 CR4: 00000690 [ 6.101189] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 6.101189] DR6: ffff0ff0 DR7: 00000400 [ 6.101189] Process swapper (pid: 1, ti=bbc2a000 task=bbc60000 task.ti=bbc2a000) [ 6.101189] Stack: [ 6.101189] 00000002 00000000 00000000 00000000 bbc60000 00000000 00000000 b1c4b308 [ 6.101189] 00000000 b1b8f3d9 bbc2bf38 b11bb431 b1c4b308 b1c4b71c bbc2bf44 bbc2bf44 [ 6.101189] b144abb6 bbc2bf58 b144ab5c 00000000 b1ee1540 00000000 bbc2bf7c b1ee162b [ 6.101189] Call Trace: [ 6.101189] [] ? do_raw_spin_unlock+0xd1/0x108 [ 6.101189] [] cfi_probe+0x12/0x14 [ 6.101189] [] do_map_probe+0x8c/0x95 [ 6.101189] [] ? physmap_init+0x61/0x61 [ 6.101189] [] init_sbc_gxx+0xeb/0x13d [ 6.101189] [] do_one_initcall+0x74/0x16e [ 6.101189] [] ? kernel_init+0xcf/0x2d5 [ 6.101189] [] kernel_init+0xe5/0x2d5 [ 6.101189] [] ret_from_kernel_thread+0x1b/0x28 [ 6.101189] [] ? rest_init+0xab/0xab [ 6.101189] Code: 8c 53 fe ff ff 8b 45 e0 c7 40 44 e8 b3 c4 b1 89 f8 e8 cb ee ff ff 8d 65 f4 5b 5e 5f 5d c3 90 90 55 89 e5 83 ec 3c 3e 8d 74 26 00 <0f> 0b 90 90 90 55 89 e5 3e 8d 74 26 00 8b 80 dc 00 00 00 5d 03 [ 6.101189] EIP: [] mtd_do_chip_probe+0xb/0x10 SS:ESP 0068:bbc2bf00 [ 6.132394] ---[ end trace f3bf3bbbdf419073 ]--- [ 6.133209] Kernel panic - not syncing: Fatal exception [ 6.134099] Rebooting in 10 seconds..