| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1353015597-22703-1-git-send-email-oleg.matcovschi@ti.com>
Date: Thu, 15 Nov 2012 13:39:57 -0800
From: <oleg.matcovschi@...com>
To: <tony@...mide.com>, <linux@....linux.org.uk>,
<linux-omap@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Oleg Matcovschi <oleg.matcovschi@...com>
Subject: [PATCH] OMAP2+: mux: Fixed gpio mux mode analysis.
From: Oleg Matcovschi <oleg.matcovschi@...com>
OMAP_MODE_GPIO() macro verified only OMAP_MUX_MODE4.
It is not correct for following platforms:
2430 - gpio mux mode 3
44xx - gpio mux mode 3
54xx - gpio mux mode 6
Patch reserves first 3 bits in partition flags for storing gpio mux
mode in same format as stored in control pad register.
Modified OMAP_MODE_GPIO() macro handles all possible cases of gpio mux mode.
Modified omap_mux_init() flags of omap34xx to include OMAP_MUX_GPIO_IN_MODE4.
Signed-off-by: Oleg Matcovschi <oleg.matcovschi@...com>
---
arch/arm/mach-omap2/mux.c | 4 ++--
arch/arm/mach-omap2/mux.h | 18 +++++++++++++-----
arch/arm/mach-omap2/mux34xx.c | 2 +-
3 files changed, 16 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17c..75f854e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -799,7 +799,7 @@ int __init omap_mux_late_init(void)
struct omap_mux *m = &e->mux;
u16 mode = omap_mux_read(partition, m->reg_offset);
- if (OMAP_MODE_GPIO(mode))
+ if (OMAP_MODE_GPIO(partition, mode))
continue;
#ifndef CONFIG_DEBUG_FS
@@ -1064,7 +1064,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
}
#else
/* Skip pins that are not muxed as GPIO by bootloader */
- if (!OMAP_MODE_GPIO(omap_mux_read(partition,
+ if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
superset->reg_offset))) {
superset++;
continue;
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 76f9b3c..8393284 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -58,7 +58,8 @@
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
-#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
+ (partition->flags & OMAP_MUX_MODE7))
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
@@ -79,13 +80,20 @@
/*
* omap_mux_init flags definition:
*
+ * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
+ * register which includes values from 0-7.
* OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
* The default value is 16 bits.
- * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
- * The default is mode4.
*/
-#define OMAP_MUX_REG_8BIT (1 << 0)
-#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1)
+#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
+#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
+#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
+#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
+#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
+#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
+#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
+#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
+#define OMAP_MUX_REG_8BIT (1 << 3)
/**
* struct omap_board_data - board specific device data
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index c47140b..c53609f4 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
return -EINVAL;
}
- return omap_mux_init("core", 0,
+ return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
OMAP3_CONTROL_PADCONF_MUX_PBASE,
OMAP3_CONTROL_PADCONF_MUX_SIZE,
omap3_muxmodes, package_subset, board_subset,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists