linux-kernel - Re: [PATCH] serial: ifx6x60: Add module parameters to manage the modem status through sysfs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Fri, 16 Nov 2012 04:38:06 -0800
From:	Greg KH <gregkh@...uxfoundation.org>
To:	Jun Chen <jun.d.chen@...el.com>
Cc:	serial <linux-serial@...r.kernel.org>,
	"russ.gorby" <russ.gorby@...el.com>,
	liu chuansheng <chuansheng.liu@...el.com>,
	Linux Kernel <linux-kernel@...r.kernel.org>,
	Bi Chao <chao.bi@...el.com>, Alan Cox <alan@...ux.intel.com>
Subject: Re: [PATCH] serial: ifx6x60: Add module parameters to manage the
 modem status through sysfs

On Fri, Nov 16, 2012 at 07:59:49AM -0500, Jun Chen wrote:
> 
> The Medfield Platform implements a recovery procedure consisting in an escalation
> from simple and light recovery procedures to stronger ones with increased visibility
> and impact to end-user.After platform find some problem from Modem,such as no response,
> platform will try do modem warm reset.If several tries failed, platform will try to
> do modem cold boot procedure.For Modem Cold Boot, AP is responsible to generate
> blob (binary object containing PIN code and other necessary information).
> Blob is stored in AP volatile memory. AP decides to read PIN code from cache instead of
> prompting end-user, and sends it to modem as if end-user had entered it.
> 
> This patch add module parameters to manage the modem status through sysfs.
> Reset_modem can be read and write by user space.When read the reset_modem,user space will
> get the mdm_reset_state which used to avoid to run twice at once.When set the reset_modem to
> IFX_COLD_RESET_REQ,modem will do cold reset, other val value will trigger modem reset.
> 
> Hangup_reasons used to give one interface to user space to know and clear the modem reset reasons.
> Now there are four reasons:SPI timeout, modem initiative reset,modem coredump,spi tranfer error.

Why are these module parameters?  Why not just "real" sysfs files
instead?  That way, if you have multiple devices in a system, it will
work properly for them.  Right now you are limited to 1 device, right?

And where have you documented these options?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/