| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20121116172828.GY17774@intel.com>
Date: Fri, 16 Nov 2012 19:28:28 +0200
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: Jean Delvare <khali@...ux-fr.org>
Cc: "Rafael J. Wysocki" <rjw@...k.pl>, ben-linux@...ff.org,
w.sang@...gutronix.de, linux-kernel@...r.kernel.org,
lenb@...nel.org, rafael.j.wysocki@...el.com,
broonie@...nsource.wolfsonmicro.com, grant.likely@...retlab.ca,
linus.walleij@...aro.org, bhelgaas@...gle.com,
mathias.nyman@...ux.intel.com, linux-acpi@...r.kernel.org
Subject: [PATCH v2 3/3 UPDATED] i2c / ACPI: add ACPI enumeration support
On Fri, Nov 16, 2012 at 05:47:53PM +0100, Jean Delvare wrote:
> Hi Mika,
>
> On Fri, 16 Nov 2012 17:23:32 +0200, Mika Westerberg wrote:
> > Here's the updated version where we handle 10-bit addresses properly
> > (hopefully).
> > (...)
> > +static int acpi_i2c_find_device(struct device *dev, acpi_handle *handle)
> > +{
> > (...)
> > + memset(&i2c_find, 0, sizeof(i2c_find));
> > + i2c_find.addr = client->addr;
> > + if (client->flags & I2C_CLIENT_TEN)
> > + i2c_find.access_mode = ACPI_I2C_10BIT_MODE;
>
> This works because you are lucky and ACPI_I2C_7BIT_MODE has value 0,
> but for correctness I'd rather add:
>
> else
> i2c_find.access_mode = ACPI_I2C_7BIT_MODE;
Right, sorry about that. The patch below should address this as well.
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
Date: Mon, 10 Sep 2012 12:12:32 +0300
Subject: [PATCH] i2c / ACPI: add ACPI enumeration support
ACPI 5 introduced I2cSerialBus resource that makes it possible to enumerate
and configure the I2C slave devices behind the I2C controller. This patch
adds helper functions to support I2C slave enumeration.
An ACPI enabled I2C controller driver only needs to call acpi_i2c_register_devices()
in order to get its slave devices enumerated, created and bound to the
corresponding ACPI handle.
Signed-off-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
---
drivers/acpi/Kconfig | 6 ++
drivers/acpi/Makefile | 1 +
drivers/acpi/acpi_i2c.c | 216 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/i2c-core.c | 10 +++
include/linux/acpi_i2c.h | 27 ++++++
5 files changed, 260 insertions(+)
create mode 100644 drivers/acpi/acpi_i2c.c
create mode 100644 include/linux/acpi_i2c.h
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 119d58d..0300bf6 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -181,6 +181,12 @@ config ACPI_DOCK
This driver supports ACPI-controlled docking stations and removable
drive bays such as the IBM Ultrabay and the Dell Module Bay.
+config ACPI_I2C
+ def_tristate I2C
+ depends on I2C
+ help
+ ACPI I2C enumeration support.
+
config ACPI_PROCESSOR
tristate "Processor"
select THERMAL
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 7289828..2a4502b 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_ACPI_HED) += hed.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
+obj-$(CONFIG_ACPI_I2C) += acpi_i2c.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
diff --git a/drivers/acpi/acpi_i2c.c b/drivers/acpi/acpi_i2c.c
new file mode 100644
index 0000000..5783d93
--- /dev/null
+++ b/drivers/acpi/acpi_i2c.c
@@ -0,0 +1,216 @@
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@...ux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/ioport.h>
+
+ACPI_MODULE_NAME("i2c");
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+ struct acpi_resource_i2c_serialbus *sb;
+ struct i2c_board_info *info = data;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 0;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ return 0;
+
+ info->addr = sb->slave_address;
+ if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+ info->flags |= I2C_CLIENT_TEN;
+
+ return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct i2c_adapter *adapter = data;
+ struct resource_list_entry *rentry;
+ struct list_head resource_list;
+ struct i2c_board_info info;
+ struct acpi_device *adev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ memset(&info, 0, sizeof(info));
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_i2c_add_resource, &info);
+ if (ret < 0)
+ return AE_OK;
+
+ list_for_each_entry(rentry, &resource_list, node) {
+ struct resource *r = &rentry->res;
+
+ if (resource_type(r) == IORESOURCE_IRQ) {
+ info.irq = r->start;
+ break;
+ }
+ }
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (!info.addr)
+ return AE_OK;
+
+ strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+ if (!i2c_new_device(adapter, &info)) {
+ dev_err(&adapter->dev,
+ "failed to add I2C device %s from ACPI\n",
+ dev_name(&adev->dev));
+ }
+
+ return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adapter: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void acpi_i2c_register_devices(struct i2c_adapter *adapter)
+{
+ acpi_handle handle;
+ acpi_status status;
+
+ handle = adapter->dev.acpi_handle;
+ if (!handle)
+ return;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_i2c_add_device, NULL,
+ adapter, NULL);
+ if (ACPI_FAILURE(status))
+ dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);
+
+struct acpi_i2c_find {
+ acpi_handle handle;
+ u16 addr;
+ u8 access_mode;
+ bool found;
+};
+
+static int acpi_i2c_find_child_address(struct acpi_resource *ares, void *data)
+{
+ struct acpi_resource_i2c_serialbus *sb;
+ struct acpi_i2c_find *i2c_find = data;
+
+ if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+ return 1;
+
+ sb = &ares->data.i2c_serial_bus;
+ if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+ return 1;
+
+ if (sb->slave_address == i2c_find->addr &&
+ sb->access_mode == i2c_find->access_mode)
+ i2c_find->found = true;
+
+ return 1;
+}
+
+static acpi_status acpi_i2c_find_child(acpi_handle handle, u32 level,
+ void *data, void **return_value)
+{
+ struct acpi_i2c_find *i2c_find = data;
+ struct list_head resource_list;
+ struct acpi_device *adev;
+ int ret;
+
+ if (acpi_bus_get_device(handle, &adev))
+ return AE_OK;
+ if (acpi_bus_get_status(adev) || !adev->status.present)
+ return AE_OK;
+
+ INIT_LIST_HEAD(&resource_list);
+ ret = acpi_dev_get_resources(adev, &resource_list,
+ acpi_i2c_find_child_address, i2c_find);
+ if (ret < 0)
+ return AE_OK;
+
+ acpi_dev_free_resource_list(&resource_list);
+
+ if (i2c_find->found) {
+ i2c_find->handle = handle;
+ return AE_CTRL_TERMINATE;
+ }
+ return AE_OK;
+}
+
+static int acpi_i2c_find_device(struct device *dev, acpi_handle *handle)
+{
+ struct acpi_i2c_find i2c_find;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+ acpi_handle parent;
+ acpi_status status;
+
+ client = i2c_verify_client(dev);
+ if (!client)
+ return -ENODEV;
+
+ adapter = client->adapter;
+ if (!adapter)
+ return -ENODEV;
+
+ parent = adapter->dev.acpi_handle;
+ if (!parent)
+ return -ENODEV;
+
+ memset(&i2c_find, 0, sizeof(i2c_find));
+ i2c_find.addr = client->addr;
+ i2c_find.access_mode = client->flags & I2C_CLIENT_TEN ?
+ ACPI_I2C_10BIT_MODE : ACPI_I2C_7BIT_MODE;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1,
+ acpi_i2c_find_child, NULL,
+ &i2c_find, NULL);
+ if (ACPI_FAILURE(status) || !i2c_find.handle)
+ return -ENODEV;
+
+ *handle = i2c_find.handle;
+ return 0;
+}
+
+static struct acpi_bus_type acpi_i2c_bus = {
+ .bus = &i2c_bus_type,
+ .find_device = acpi_i2c_find_device,
+};
+
+void acpi_i2c_bus_register(void)
+{
+ register_acpi_bus_type(&acpi_i2c_bus);
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_bus_register);
+
+void acpi_i2c_bus_unregister(void)
+{
+ unregister_acpi_bus_type(&acpi_i2c_bus);
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_bus_unregister);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index a7edf98..7385de2f 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -39,6 +39,8 @@
#include <linux/irqflags.h>
#include <linux/rwsem.h>
#include <linux/pm_runtime.h>
+#include <linux/acpi.h>
+#include <linux/acpi_i2c.h>
#include <asm/uaccess.h>
#include "i2c-core.h"
@@ -78,6 +80,10 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
if (of_driver_match_device(dev, drv))
return 1;
+ /* Then ACPI style match */
+ if (acpi_driver_match_device(dev, drv))
+ return 1;
+
driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
@@ -1298,6 +1304,8 @@ static int __init i2c_init(void)
retval = i2c_add_driver(&dummy_driver);
if (retval)
goto class_err;
+
+ acpi_i2c_bus_register();
return 0;
class_err:
@@ -1311,6 +1319,8 @@ bus_err:
static void __exit i2c_exit(void)
{
+ acpi_i2c_bus_unregister();
+
i2c_del_driver(&dummy_driver);
#ifdef CONFIG_I2C_COMPAT
class_compat_unregister(i2c_adapter_compat_class);
diff --git a/include/linux/acpi_i2c.h b/include/linux/acpi_i2c.h
new file mode 100644
index 0000000..cf2233f
--- /dev/null
+++ b/include/linux/acpi_i2c.h
@@ -0,0 +1,27 @@
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@...ux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef LINUX_ACPI_I2C_H
+#define LINUX_ACPI_I2C_H
+
+struct i2c_adapter;
+
+#if IS_ENABLED(CONFIG_ACPI_I2C)
+extern void acpi_i2c_register_devices(struct i2c_adapter *adap);
+extern void acpi_i2c_bus_register(void);
+extern void acpi_i2c_bus_unregister(void);
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+static inline void acpi_i2c_bus_register(void) {}
+static inline void acpi_i2c_bus_unregister(void) {}
+#endif /* IS_ENABLED(CONFIG_ACPI_I2C) */
+
+#endif /* LINUX_ACPI_I2C_H */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists