| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1353422700-14485-5-git-send-email-johanmeiring@gmail.com>
Date: Tue, 20 Nov 2012 16:44:58 +0200
From: Johan Meiring <johanmeiring@...il.com>
To: pe1dnn@...at.org, jkosina@...e.cz, standby24x7@...il.com,
viro@...iv.linux.org.uk, gregkh@...uxfoundation.org
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Johan Meiring <johanmeiring@...il.com>
Subject: [PATCH 6/8] staging: wlags49_h2: wl_if.h: gets rid of C99 // comments
This commit converts all C99 // comments to standard /* */ comments
Signed-off-by: Johan Meiring <johanmeiring@...il.com>
---
drivers/staging/wlags49_h2/wl_if.h | 39 +++++++++++++++---------------------
1 file changed, 16 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/wlags49_h2/wl_if.h b/drivers/staging/wlags49_h2/wl_if.h
index 351d29b..425d373 100644
--- a/drivers/staging/wlags49_h2/wl_if.h
+++ b/drivers/staging/wlags49_h2/wl_if.h
@@ -80,24 +80,17 @@
#define TX_TIMEOUT ((800 * HZ) / 1000)
-//#define HCF_MIN_COMM_QUALITY 0
-//#define HCF_MAX_COMM_QUALITY 92
-//#define HCF_MIN_SIGNAL_LEVEL 47
-//#define HCF_MAX_SIGNAL_LEVEL 138
-//#define HCF_MIN_NOISE_LEVEL 47
-//#define HCF_MAX_NOISE_LEVEL 138
-//#define HCF_0DBM_OFFSET 149
-
-// PE1DNN
-// Better data from the real world. Not scientific but empirical data gathered
-// from a Thomson Speedtouch 110 which is identified as:
-// PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
-// Manufacture ID: 0156,0003
-// Lowest measurment for noise floor seen is value 54
-// Highest signal strength in close proximity to the AP seen is value 118
-// Very good must be around 100 (otherwise its never "full scale"
-// All other constants are derrived from these. This makes the signal gauge
-// work for me...
+/* PE1DNN
+ * Better data from the real world. Not scientific but empirical data gathered
+ * from a Thomson Speedtouch 110 which is identified as:
+ * PCMCIA Info: "Agere Systems" "Wireless PC Card Model 0110"
+ * Manufacture ID: 0156,0003
+ * Lowest measurment for noise floor seen is value 54
+ * Highest signal strength in close proximity to the AP seen is value 118
+ * Very good must be around 100 (otherwise its never "full scale"
+ * All other constants are derrived from these. This makes the signal gauge
+ * work for me...
+ */
#define HCF_MIN_SIGNAL_LEVEL 54
#define HCF_MAX_SIGNAL_LEVEL 100
#define HCF_MIN_NOISE_LEVEL HCF_MIN_SIGNAL_LEVEL
@@ -109,8 +102,8 @@
/* For encryption (WEP) */
-#define MIN_KEY_SIZE 5 // 40 bits RC4 - WEP
-#define MAX_KEY_SIZE 13 // 104 bits
+#define MIN_KEY_SIZE 5 /* 40 bits RC4 - WEP */
+#define MAX_KEY_SIZE 13 /* 104 bits */
#define MAX_KEYS 4
#define RADIO_CHANNELS 14
@@ -126,8 +119,8 @@
#define HCF_FAILURE 0xFF
#define UIL_FAILURE 0xFF
-#define CFG_UIL_CONNECT 0xA123 // Define differently?
-#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A // VSCZ
+#define CFG_UIL_CONNECT 0xA123 /* Define differently? */
+#define CFG_UIL_CONNECT_ACK_CODE 0x5653435A /* VSCZ */
#define WVLAN2_UIL_CONNECTED (0x01L << 0)
#define WVLAN2_UIL_BUSY (0x01L << 1)
@@ -224,5 +217,5 @@ struct rtsreq {
};
-#endif // __WAVELAN2_IF_H__
+#endif /* __WAVELAN2_IF_H__ */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists