| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1353488481-14371-1-git-send-email-b29237@freescale.com>
Date: Wed, 21 Nov 2012 17:01:20 +0800
From: <b29237@...escale.com>
To: <dan.j.williams@...il.com>, <vinod.koul@...el.com>,
<linuxppc-dev@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>
CC: <iws@...o.caltech.edu>, Xuelin Shi <b29237@...escale.com>,
Harninder Rai <harninder.rai@...escale.com>,
Naveen Burmi <naveenburmi@...escale.com>
Subject: [PATCH 1/2] powerpc/dma/raidengine: add raidengine device
From: Xuelin Shi <b29237@...escale.com>
The RaidEngine is a new Freescale hardware that used for parity
computation offloading in RAID5/6.
This patch adds the device node in device tree and related binding
documentation.
Signed-off-by: Harninder Rai <harninder.rai@...escale.com>
Signed-off-by: Naveen Burmi <naveenburmi@...escale.com>
Signed-off-by: Xuelin Shi <b29237@...escale.com>
---
.../devicetree/bindings/powerpc/fsl/raideng.txt | 81 +++++++++++++++++++
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi | 1 +
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi | 6 ++
arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi | 85 ++++++++++++++++++++
4 files changed, 173 insertions(+)
create mode 100644 Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 0000000..4ad29b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators. Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible: Should contain "fsl,raideng-v1.0" as the value
+ This identifies RAID Engine block. 1 in 1.0 represents
+ major number whereas 0 represents minor number. The
+ version matches the hardware IP version.
+- reg: offset and length of the register set for the device
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng: raideng@...000 {
+ compatible = "fsl,raideng-v1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x320000 0x10000>;
+ ranges = <0 0x320000 0x10000>;
+ };
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible: Should contain "fsl,raideng-v1.0-job-queue" as the value
+ This identifies the job queue interface
+- reg: offset and length of the register set for job queue
+- ranges: standard ranges property specifying the translation
+ between child address space and parent address space
+
+Example:
+ /* P5020 */
+ raideng_jq0@...0 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+ };
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible: Must contain "fsl,raideng-v1.0-job-ring" as the value
+ This identifies job ring. Should contain either
+ "fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+ depending upon whether ring has high or low priority
+- reg: offset and length of the register set for job ring
+- interrupts: interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn: Specifies the LIODN to be used for Job Ring. This
+ property is normally set by firmware. Value
+ is of 12-bits which is the LIODN number for this JR.
+ This property is used by the IOMMU (PAMU) to distinquish
+ transactions from this JR and than be able to do address
+ translation & protection accordingly.
+
+Example:
+ /* P5020 */
+ raideng_jq0@...0 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+
+ raideng_jr0: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <139 2 0 0>;
+ interrupt-parent = <&mpic>;
+ fsl,liodn = <0x41>;
+ };
+ };
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
index 64b6abe..5d7205b 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@@ -354,4 +354,5 @@
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
+/include/ "qoriq-raid1.0-0.dtsi"
};
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 0a198b0..8df47fc 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -73,6 +73,12 @@
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
+
+ raideng = &raideng;
+ raideng_jr0 = &raideng_jr0;
+ raideng_jr1 = &raideng_jr1;
+ raideng_jr2 = &raideng_jr2;
+ raideng_jr3 = &raideng_jr3;
};
cpus {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
new file mode 100644
index 0000000..8d2e8aa
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
@@ -0,0 +1,85 @@
+/*
+ * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+raideng: raideng@...000 {
+ compatible = "fsl,raideng-v1.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x320000 0x10000>;
+ ranges = <0 0x320000 0x10000>;
+
+ raideng_jq0@...0 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1000 0x1000>;
+ ranges = <0x0 0x1000 0x1000>;
+
+ raideng_jr0: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <139 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ raideng_jr1: jr@400 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+ reg = <0x400 0x400>;
+ interrupts = <140 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ raideng_jq1@...0 {
+ compatible = "fsl,raideng-v1.0-job-queue";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x2000 0x1000>;
+ ranges = <0x0 0x2000 0x1000>;
+
+ raideng_jr2: jr@0 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+ reg = <0x0 0x400>;
+ interrupts = <141 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ raideng_jr3: jr@400 {
+ compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+ reg = <0x400 0x400>;
+ interrupts = <142 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists