[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <f1d508c64a01dfd492a1ab1fda28af4b7647d8ab.1353560936.git.viresh.kumar@linaro.org>
Date: Thu, 22 Nov 2012 10:40:29 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: sameo@...ux.intel.com
Cc: devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
spear-devel@...t.st.com, lee.jones@...aro.org,
Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V2 1/2] mfd: stmpe: Use devm_*() routines
This patch frees stmpe driver from tension of freeing resources :)
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
V1->V2:
------
- Rebased over latest for-next from Samuel
- updated additional kzalloc with devm_kzalloc(), first one seen below.
drivers/mfd/stmpe.c | 60 +++++++++++++++++++----------------------------------
1 file changed, 21 insertions(+), 39 deletions(-)
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index ba157d4..c0df4b9 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1052,17 +1052,17 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
int ret;
if (!pdata) {
- if (np) {
- pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
-
- stmpe_of_probe(pdata, np);
- } else
+ if (!np)
return -EINVAL;
+
+ pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ stmpe_of_probe(pdata, np);
}
- stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
+ stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
if (!stmpe)
return -ENOMEM;
@@ -1084,11 +1084,12 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
ci->init(stmpe);
if (pdata->irq_over_gpio) {
- ret = gpio_request_one(pdata->irq_gpio, GPIOF_DIR_IN, "stmpe");
+ ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
+ GPIOF_DIR_IN, "stmpe");
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
ret);
- goto out_free;
+ return ret;
}
stmpe->irq = gpio_to_irq(pdata->irq_gpio);
@@ -1105,48 +1106,37 @@ int __devinit stmpe_probe(struct stmpe_client_info *ci, int partnum)
dev_err(stmpe->dev,
"%s does not support no-irq mode!\n",
stmpe->variant->name);
- ret = -ENODEV;
- goto free_gpio;
+ return -ENODEV;
}
stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
}
ret = stmpe_chip_init(stmpe);
if (ret)
- goto free_gpio;
+ return ret;
if (stmpe->irq >= 0) {
ret = stmpe_irq_init(stmpe, np);
if (ret)
- goto free_gpio;
+ return ret;
- ret = request_threaded_irq(stmpe->irq, NULL, stmpe_irq,
- pdata->irq_trigger | IRQF_ONESHOT,
+ ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
+ stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
"stmpe", stmpe);
if (ret) {
dev_err(stmpe->dev, "failed to request IRQ: %d\n",
ret);
- goto free_gpio;
+ return ret;
}
}
ret = stmpe_devices_init(stmpe);
- if (ret) {
- dev_err(stmpe->dev, "failed to add children\n");
- goto out_removedevs;
- }
-
- return 0;
+ if (!ret)
+ return 0;
-out_removedevs:
+ dev_err(stmpe->dev, "failed to add children\n");
mfd_remove_devices(stmpe->dev);
- if (stmpe->irq >= 0)
- free_irq(stmpe->irq, stmpe);
-free_gpio:
- if (pdata->irq_over_gpio)
- gpio_free(pdata->irq_gpio);
-out_free:
- kfree(stmpe);
+
return ret;
}
@@ -1154,14 +1144,6 @@ int stmpe_remove(struct stmpe *stmpe)
{
mfd_remove_devices(stmpe->dev);
- if (stmpe->irq >= 0)
- free_irq(stmpe->irq, stmpe);
-
- if (stmpe->pdata->irq_over_gpio)
- gpio_free(stmpe->pdata->irq_gpio);
-
- kfree(stmpe);
-
return 0;
}
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists