[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <912d88b8906ce87cf5459cf3d5798e03bfce34c7.1353649737.git.viresh.kumar@linaro.org>
Date: Fri, 23 Nov 2012 11:21:01 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: linus.walleij@...aro.org, grant.likely@...retlab.ca
Cc: devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
spear-devel@...t.st.com, lee.jones@...aro.org,
Vipul Kumar Samar <vipulkumar.samar@...com>,
Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH] gpio: stmpe: Add DT support for stmpe gpio
From: Vipul Kumar Samar <vipulkumar.samar@...com>
This patch allows the STMPE GPIO driver to be successfully probed and
initialised when Device Tree support is enabled. Bindings are mentioned in
Documentation too.
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@...com>
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
---
Documentation/devicetree/bindings/gpio/gpio-stmpe.txt | 18 ++++++++++++++++++
drivers/gpio/gpio-stmpe.c | 15 ++++++++++++---
drivers/mfd/stmpe.c | 2 ++
3 files changed, 32 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
new file mode 100644
index 0000000..7f010e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -0,0 +1,18 @@
+STMPE gpio
+----------
+
+Required properties:
+ - compatible: "st,stmpe-gpio"
+
+Optional properties:
+ - norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
+ due to different usage (e.g. touch, keypad)
+
+Node name must be stmpe_gpio and should be child node of stmpe node to which it
+belongs.
+
+Example:
+ stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ st,norequest-mask = <0x20>; //gpio 5 can't be used
+ };
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index dce3472..91455d4 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -12,6 +12,7 @@
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/mfd/stmpe.h>
/*
@@ -304,6 +305,7 @@ static void stmpe_gpio_irq_remove(struct stmpe_gpio *stmpe_gpio)
static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_gpio_platform_data *pdata;
struct stmpe_gpio *stmpe_gpio;
int ret;
@@ -321,12 +323,19 @@ static int __devinit stmpe_gpio_probe(struct platform_device *pdev)
stmpe_gpio->dev = &pdev->dev;
stmpe_gpio->stmpe = stmpe;
- stmpe_gpio->norequest_mask = pdata ? pdata->norequest_mask : 0;
-
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
- stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
+
+ if (pdata) {
+ stmpe_gpio->norequest_mask = pdata->norequest_mask;
+ stmpe_gpio->chip.base = pdata->gpio_base;
+ } else {
+ stmpe_gpio->chip.base = -1;
+ if (np)
+ of_property_read_u32(np, "st,norequest-mask",
+ &pdata->norequest_mask);
+ }
if (irq >= 0)
stmpe_gpio->irq_base = stmpe->irq_base + STMPE_INT_GPIO(0);
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index e2c0dda..c757ac3 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -298,12 +298,14 @@ static struct resource stmpe_gpio_resources[] = {
static struct mfd_cell stmpe_gpio_cell = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
.resources = stmpe_gpio_resources,
.num_resources = ARRAY_SIZE(stmpe_gpio_resources),
};
static struct mfd_cell stmpe_gpio_cell_noirq = {
.name = "stmpe-gpio",
+ .of_compatible = "st,stmpe-gpio",
/* gpio cell resources consist of an irq only so no resources here */
};
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists